Flanges
Conflat flanges (CF) are designed to enable affordable, repeatable seals, that have low leak rate and the ability to withstand the high temperatures used for de-gassing (up to 450°C) without leaking. Our range of UHV flanges are fully compatible with the internationally agreed standards and will connect to any other compliant CF flange. Available, as standard, in 304L and 316LN ESR.
- 34mm OD - 304L Fixed Blank CF Flange8 to 10 weeks delivery£10.86Fixed blank Conflat flange (CF) are available in the full range of sizes. These are used to blank off unused chamber ports for leak-tight assembly, also allowing End User machining for non standard tube sizes or components.
- 34mm OD - 304L Tapped Fixed Blank CF Flange8 to 10 weeks deliveryFixed blank Conflat flange (CF) are available in the full range of sizes. These are used to blank off unused chamber ports for leak-tight assembly, also allowing End User machining for non standard tube sizes or components.
- 70mm OD - 304L Fixed Blank CF Flange8 to 10 weeks delivery£16.42Fixed blank Conflat flange (CF) are available in the full range of sizes. These are used to blank off unused chamber ports for leak-tight assembly, also allowing End User machining for non standard tube sizes or components.
- 70mm OD - 304L Tapped Fixed Blank CF Flange8 to 10 weeks delivery£22.42Fixed blank Conflat flange (CF) are available in the full range of sizes. These are used to blank off unused chamber ports for leak-tight assembly, also allowing End User machining for non standard tube sizes or components.
- 114mm OD - 304L Fixed Blank CF Flange8 to 10 weeks delivery£46.60Fixed blank Conflat flange (CF) are available in the full range of sizes. These are used to blank off unused chamber ports for leak-tight assembly, also allowing End User machining for non standard tube sizes or components.
- 114mm OD - 304L Tapped Fixed Blank CF Flange8 to 10 weeks deliveryFixed blank Conflat flange (CF) are available in the full range of sizes. These are used to blank off unused chamber ports for leak-tight assembly, also allowing End User machining for non standard tube sizes or components.
- 152mm OD - 304L Fixed Blank CF Flange8 to 10 weeks delivery£82.50Fixed blank Conflat flange (CF) are available in the full range of sizes. These are used to blank off unused chamber ports for leak-tight assembly, also allowing End User machining for non standard tube sizes or components.
- 152mm OD - 304L Tapped Fixed Blank CF Flange8 to 10 weeks deliveryFixed blank Conflat flange (CF) are available in the full range of sizes. These are used to blank off unused chamber ports for leak-tight assembly, also allowing End User machining for non standard tube sizes or components.
- 203mm OD - 304L Fixed Blank CF Flange8 to 10 weeks delivery£143.07Fixed blank Conflat flange (CF) are available in the full range of sizes. These are used to blank off unused chamber ports for leak-tight assembly, also allowing End User machining for non standard tube sizes or components.
- 203mm OD - 304L Tapped Fixed Blank CF Flange8 to 10 weeks deliveryFixed blank Conflat flange (CF) are available in the full range of sizes. These are used to blank off unused chamber ports for leak-tight assembly, also allowing End User machining for non standard tube sizes or components.
- 254mm OD - 304L Fixed Blank CF Flange8 to 10 weeks deliveryFixed blank Conflat flange (CF) are available in the full range of sizes. These are used to blank off unused chamber ports for leak-tight assembly, also allowing End User machining for non standard tube sizes or components.
- 34mm OD 19mm ID - 304L Fixed Bored CF Flange8 to 10 weeks delivery£10.23Fixed bored Conflat flange (CF) are available in the full range of sizes. The smaller range of flange can accept a number of different standard tube sizes. These are prepared ready for welding onto chamber tubulations or components.
- 34mm OD 19mm ID - 304L Tapped Fixed Bored CF Flange8 to 10 weeks delivery£11.17Fixed bored Conflat flange (CF) are available in the full range of sizes. The smaller range of flange can accept a number of different standard tube sizes. These are prepared ready for welding onto chamber tubulations or components.
- 70mm OD 41mm ID - 304L Fixed Bored CF Flange8 to 10 weeks deliveryFixed bored Conflat flange (CF) are available in the full range of sizes. The smaller range of flange can accept a number of different standard tube sizes. These are prepared ready for welding onto chamber tubulations or components.
- 70mm OD 41mm ID - 304L Tapped Fixed Bored CF Flange8 to 10 weeks delivery£22.55Fixed bored Conflat flange (CF) are available in the full range of sizes. The smaller range of flange can accept a number of different standard tube sizes. These are prepared ready for welding onto chamber tubulations or components.
- 114mm OD 70mm ID - 304L Fixed Bored CF Flange8 to 10 weeks deliveryFixed bored Conflat flange (CF) are available in the full range of sizes. The smaller range of flange can accept a number of different standard tube sizes. These are prepared ready for welding onto chamber tubulations or components.
- 114mm OD 70mm ID - 304L Tapped Fixed Bored CF Flange8 to 10 weeks delivery£59.19Fixed bored Conflat flange (CF) are available in the full range of sizes. The smaller range of flange can accept a number of different standard tube sizes. These are prepared ready for welding onto chamber tubulations or components.
- 152mm OD 102mm ID - 304L Fixed Bored CF Flange8 to 10 weeks deliveryFixed bored Conflat flange (CF) are available in the full range of sizes. The smaller range of flange can accept a number of different standard tube sizes. These are prepared ready for welding onto chamber tubulations or components.
- 152mm OD 102mm ID - 304L Tapped Fixed Bored CF Flange8 to 10 weeks deliveryFixed bored Conflat flange (CF) are available in the full range of sizes. The smaller range of flange can accept a number of different standard tube sizes. These are prepared ready for welding onto chamber tubulations or components.
- 203mm OD 153mm ID - 304L Fixed Bored CF Flange8 to 10 weeks delivery£135.33Fixed bored Conflat flange (CF) are available in the full range of sizes. The smaller range of flange can accept a number of different standard tube sizes. These are prepared ready for welding onto chamber tubulations or components.
- 203mm OD 153mm ID - 304L Tapped Fixed Bored CF Flange8 to 10 weeks deliveryFixed bored Conflat flange (CF) are available in the full range of sizes. The smaller range of flange can accept a number of different standard tube sizes. These are prepared ready for welding onto chamber tubulations or components.
- 34mm OD - 304L Rotable Blank CF Flange8 to 10 weeks deliveryRotatable blank Conflat flange (CF) consists of two parts, the inner knife edge detail and the outer bolt hole retaining ring which rotates around the inner part. This allows the boltholes to align to mating flanges in any orientation. These are used to blank off unused chamber ports for leak-tight assembly, also allowing End User machining for non standard tube sizes or components.
- 70mm OD - 304L Rotable Blank CF Flange8 to 10 weeks deliveryRotatable blank Conflat flange (CF) consists of two parts, the inner knife edge detail and the outer bolt hole retaining ring which rotates around the inner part. This allows the boltholes to align to mating flanges in any orientation. These are used to blank off unused chamber ports for leak-tight assembly, also allowing End User machining for non standard tube sizes or components.
- 114mm OD - 304L Rotable Blank CF Flange8 to 10 weeks deliveryRotatable blank Conflat flange (CF) consists of two parts, the inner knife edge detail and the outer bolt hole retaining ring which rotates around the inner part. This allows the boltholes to align to mating flanges in any orientation. These are used to blank off unused chamber ports for leak-tight assembly, also allowing End User machining for non standard tube sizes or components.
- 152mm OD - 304L Rotable Blank CF Flange8 to 10 weeks deliveryRotatable blank Conflat flange (CF) consists of two parts, the inner knife edge detail and the outer bolt hole retaining ring which rotates around the inner part. This allows the boltholes to align to mating flanges in any orientation. These are used to blank off unused chamber ports for leak-tight assembly, also allowing End User machining for non standard tube sizes or components.
- 203mm OD - 304L Rotable Blank CF Flange8 to 10 weeks delivery£0.00Rotatable blank Conflat flange (CF) consists of two parts, the inner knife edge detail and the outer bolt hole retaining ring which rotates around the inner part. This allows the boltholes to align to mating flanges in any orientation. These are used to blank off unused chamber ports for leak-tight assembly, also allowing End User machining for non standard tube sizes or components.
- 254mm OD - 304L Rotable Blank CF Flange8 to 10 weeks deliveryRotatable blank Conflat flange (CF) consists of two parts, the inner knife edge detail and the outer bolt hole retaining ring which rotates around the inner part. This allows the boltholes to align to mating flanges in any orientation. These are used to blank off unused chamber ports for leak-tight assembly, also allowing End User machining for non standard tube sizes or components.
- 34mm OD 6mm ID - 304L Rotable Bored CF Flange8 to 10 weeks deliveryRotatable bored Conflat Flange (CF) are available in the full range of sizes. The smaller range of flange can accept a number of different standard tube sizes. These are prepared ready for welding onto chamber tubulations or components. The rotatable flange consists of two parts, the inner knife edge detail and the outer bolt hole retaining ring which rotates around the inner part.
- 34mm OD 6mm ID - 304L Tapped Rotable Bored CF Flange8 to 10 weeks delivery£0.00Rotatable bored Conflat Flange (CF) are available in the full range of sizes. The smaller range of flange can accept a number of different standard tube sizes. These are prepared ready for welding onto chamber tubulations or components. The rotatable flange consists of two parts, the inner knife edge detail and the outer bolt hole retaining ring which rotates around the inner part.
- 70mm OD 41mm ID - 304L Rotable Bored CF Flange8 to 10 weeks delivery£42.74Rotatable bored Conflat Flange (CF) are available in the full range of sizes. The smaller range of flange can accept a number of different standard tube sizes. These are prepared ready for welding onto chamber tubulations or components. The rotatable flange consists of two parts, the inner knife edge detail and the outer bolt hole retaining ring which rotates around the inner part.
- 70mm OD 41mm ID - 304L Tapped Bored CF Flange8 to 10 weeks delivery£51.28Rotatable bored Conflat Flange (CF) are available in the full range of sizes. The smaller range of flange can accept a number of different standard tube sizes. These are prepared ready for welding onto chamber tubulations or components. The rotatable flange consists of two parts, the inner knife edge detail and the outer bolt hole retaining ring which rotates around the inner part.
- 114mm OD 70mm ID - 304L Rotable Bored CF Flange8 to 10 weeks delivery£73.26Rotatable bored Conflat Flange (CF) are available in the full range of sizes. The smaller range of flange can accept a number of different standard tube sizes. These are prepared ready for welding onto chamber tubulations or components. The rotatable flange consists of two parts, the inner knife edge detail and the outer bolt hole retaining ring which rotates around the inner part.
- 114mm OD 70mm ID - 304L Tapped Rotable Bored CF Flange8 to 10 weeks delivery£85.47Rotatable bored Conflat Flange (CF) are available in the full range of sizes. The smaller range of flange can accept a number of different standard tube sizes. These are prepared ready for welding onto chamber tubulations or components. The rotatable flange consists of two parts, the inner knife edge detail and the outer bolt hole retaining ring which rotates around the inner part.
- 152mm OD 102mm ID - 304L Rotable Bored CF Flange8 to 10 weeks delivery£97.68Rotatable bored Conflat Flange (CF) are available in the full range of sizes. The smaller range of flange can accept a number of different standard tube sizes. These are prepared ready for welding onto chamber tubulations or components. The rotatable flange consists of two parts, the inner knife edge detail and the outer bolt hole retaining ring which rotates around the inner part.
- 152mm OD 102mm ID - 304L Tapped Rotable Bored CF FlangeM88 to 10 weeks delivery£103.79Rotatable bored Conflat Flange (CF) are available in the full range of sizes. The smaller range of flange can accept a number of different standard tube sizes. These are prepared ready for welding onto chamber tubulations or components. The rotatable flange consists of two parts, the inner knife edge detail and the outer bolt hole retaining ring which rotates around the inner part.
- 203mm OD 153mm ID - 304L Rotable Bored CF Flange8 to 10 weeks delivery£195.36Rotatable bored Conflat Flange (CF) are available in the full range of sizes. The smaller range of flange can accept a number of different standard tube sizes. These are prepared ready for welding onto chamber tubulations or components. The rotatable flange consists of two parts, the inner knife edge detail and the outer bolt hole retaining ring which rotates around the inner part.
- 203mm OD 153mm ID - 304L Tapped Rotable Bored CF Flange8 to 10 weeks delivery£0.00Rotatable bored Conflat Flange (CF) are available in the full range of sizes. The smaller range of flange can accept a number of different standard tube sizes. These are prepared ready for welding onto chamber tubulations or components. The rotatable flange consists of two parts, the inner knife edge detail and the outer bolt hole retaining ring which rotates around the inner part.
- 254mm OD 206mm ID - 304L Rotable Bored CF Flange8 to 10 weeks delivery£0.00Rotatable bored Conflat Flange (CF) are available in the full range of sizes. The smaller range of flange can accept a number of different standard tube sizes. These are prepared ready for welding onto chamber tubulations or components. The rotatable flange consists of two parts, the inner knife edge detail and the outer bolt hole retaining ring which rotates around the inner part.
- 254mm OD 206mm ID - 304L Tapped Rotable Bored CF Flange8 to 10 weeks delivery£0.00Rotatable bored Conflat Flange (CF) are available in the full range of sizes. The smaller range of flange can accept a number of different standard tube sizes. These are prepared ready for welding onto chamber tubulations or components. The rotatable flange consists of two parts, the inner knife edge detail and the outer bolt hole retaining ring which rotates around the inner part.
- 203mm OD 153mm ID - 316LN (2D) Fixed Bored CF Flange8 to 10 weeks deliveryFixed bored Conflat flange (CF) are available in the full range of sizes. The smaller range of flange can accept a number of different standard tube sizes. These are prepared ready for welding onto chamber tubulations or components.
- 70mm to 34mm OD 304L Zero Length Bored Adaptors8 to 10 weeks delivery£52.45Zero Length Adaptor conflat Flange (CF) are used to adapt from one flange size to another. The larger flange OD has through bolt holes enabling ordinary nut and bolt to be used. The smaller flange OD has metric tapped holes. This connects different sizes of flanges where there is limited space and does not increase the chamber volume.
- 114mm to 34mm OD 304L Zero Length Bored Adaptors8 to 10 weeks deliveryZero Length Adaptor conflat Flange (CF) are used to adapt from one flange size to another. The larger flange OD has through bolt holes enabling ordinary nut and bolt to be used. The smaller flange OD has metric tapped holes. This connects different sizes of flanges where there is limited space and does not increase the chamber volume.
- 114mm to 70mm OD 304L Zero Length Bored Adaptors8 to 10 weeks delivery£114.24Zero Length Adaptor conflat Flange (CF) are used to adapt from one flange size to another. The larger flange OD has through bolt holes enabling ordinary nut and bolt to be used. The smaller flange OD has metric tapped holes. This connects different sizes of flanges where there is limited space and does not increase the chamber volume.
- 152mm to 70mm OD 304L Zero Length Bored Adaptors8 to 10 weeks delivery£120.31Zero Length Adaptor conflat Flange (CF) are used to adapt from one flange size to another. The larger flange OD has through bolt holes enabling ordinary nut and bolt to be used. The smaller flange OD has metric tapped holes. This connects different sizes of flanges where there is limited space and does not increase the chamber volume.
- 203mm to 70mm OD 304L Zero Length Bored Adaptors8 to 10 weeks deliveryZero Length Adaptor conflat Flange (CF) are used to adapt from one flange size to another. The larger flange OD has through bolt holes enabling ordinary nut and bolt to be used. The smaller flange OD has metric tapped holes. This connects different sizes of flanges where there is limited space and does not increase the chamber volume.
- 254mm to 70mm OD 304L Zero Length Bored Adaptors8 to 10 weeks deliveryZero Length Adaptor conflat Flange (CF) are used to adapt from one flange size to another. The larger flange OD has through bolt holes enabling ordinary nut and bolt to be used. The smaller flange OD has metric tapped holes. This connects different sizes of flanges where there is limited space and does not increase the chamber volume.
- 152mm to 114mm OD 304L Zero Length Bored Adaptors8 to 10 weeks deliveryZero Length Adaptor conflat Flange (CF) are used to adapt from one flange size to another. The larger flange OD has through bolt holes enabling ordinary nut and bolt to be used. The smaller flange OD has metric tapped holes. This connects different sizes of flanges where there is limited space and does not increase the chamber volume.
- 203mm to 114mm OD 304L Zero Length Bored Adaptors8 to 10 weeks deliveryZero Length Adaptor conflat Flange (CF) are used to adapt from one flange size to another. The larger flange OD has through bolt holes enabling ordinary nut and bolt to be used. The smaller flange OD has metric tapped holes. This connects different sizes of flanges where there is limited space and does not increase the chamber volume.
- 254mm to 114mm OD 304L Zero Length Bored Adaptors8 to 10 weeks deliveryZero Length Adaptor conflat Flange (CF) are used to adapt from one flange size to another. The larger flange OD has through bolt holes enabling ordinary nut and bolt to be used. The smaller flange OD has metric tapped holes. This connects different sizes of flanges where there is limited space and does not increase the chamber volume.
- 203mm to 152mm OD 304L Zero Length Bored Adaptors8 to 10 weeks deliveryZero Length Adaptor conflat Flange (CF) are used to adapt from one flange size to another. The larger flange OD has through bolt holes enabling ordinary nut and bolt to be used. The smaller flange OD has metric tapped holes. This connects different sizes of flanges where there is limited space and does not increase the chamber volume.
- 254mm to 152mm OD 304L Zero Length Bored Adaptors8 to 10 weeks deliveryZero Length Adaptor conflat Flange (CF) are used to adapt from one flange size to another. The larger flange OD has through bolt holes enabling ordinary nut and bolt to be used. The smaller flange OD has metric tapped holes. This connects different sizes of flanges where there is limited space and does not increase the chamber volume.
- 254mm to 203mm OD 304L Zero Length Bored Adaptors8 to 10 weeks deliveryZero Length Adaptor conflat Flange (CF) are used to adapt from one flange size to another. The larger flange OD has through bolt holes enabling ordinary nut and bolt to be used. The smaller flange OD has metric tapped holes. This connects different sizes of flanges where there is limited space and does not increase the chamber volume.
