UHV Accessory Products For All Applications
View our range of high quality and reliable UHV accessory products for prototype development and general laboratory use cases including all vacuum chambers and associated applications. VACGEN has supplied a wide range of auxiliary products for many years including viewports, flanges and gaskets, UHV fittings and sublimation pumps
Gaskets | Viewports | Flanges |
 |  |  |
| Our Gaskets are manufactured from oxygen-free, high-conductivity copper and are specifically designed for UHV applications. We supply in a range of standard types including commercial grade for large quantities, etched for a super clean environment, annealed for use with viewports and silver plated for synchrotron and low mag environments. | VACGEN offer a complete range of UHV compatible viewports to suit all clean and UHV applications. They have a wide angle of vision, maximum protection from accidental damage and minimum transmission of strain from flange bolts. | Conflat flanges (CF) are designed to enable affordable, repeatable seals, that have low leak rate and the ability to withstand the high temperatures used for de-gassing (up to 450°C) without leaking. Our range of UHV flanges are fully compatible with the internationally agreed standards and will connect to any other compliant CF flange. Available, as standard, in 304L and 316LN ESR. |
Fittings | Sublimation Pump | Feedthroughs |
 |  |  |
| Fittings can be used for connecting different parts of the UHV system. Our range of fittings include tubulated flanges, straight connectors, tee pieces, 4-way and 6-way crosses, radius elbows and flexible connectors. | Our sublimation pump is designed to operate between 1x10-4 to 1x10-12 mbar and have interchangeable filaments for the sub pump head. The sub pump is operated using the SPC8 controller which provides all the necessary features for sub pump operation. | Feedthroughs are designed to carry services into the vacuum environments. Instrumentation, power and liquid feedthroughs are available in a variety of orientations. |
Ion Gauges | Hinged Doors | Port Aligner |
|  |  |
| Our pressure measurement products are designed to operate from atmospheric pressure to 1x10-10 mbar. The IGC5 controller can run a Pirani Gauge and Ion Gauge, covering the wide range of operating pressures encountered when taking a system down to UHV environments. We also supply a range of spares for our Ion Gauges including filaments, grids and connectors. | The HD range of fast entry air lock doors can be used to load items into a prep chamber. They come in two configurations - either a plain door, or with a built-in viewport. This is an ideal solution for keeping the main system under UHV conditions whilst a sample is loaded. | A port aligner allows the precise mechanical alignment of sample transfer and docking systems, such as MLRV and RLRP. They are a cost-effective way to save time during system installation, where sample transfer tools are being set up for the first time. |
- 3 Way 40A 15Kv DN38CF Feedthrough8 to 10 weeks deliveryInstrumentation feedthroughs are used to carry electrical signals (Including Thermocouple) which are normally low current and/or voltage. These feedthroughs are available in multi pin versions on either 34mm or 70mm OD flanges. These also come with the option of a European voltage compliant connectors
- 34mm OD - 304L Fixed Blank CF Flange8 to 10 weeks delivery£10.86Fixed blank Conflat flange (CF) are available in the full range of sizes. These are used to blank off unused chamber ports for leak-tight assembly, also allowing End User machining for non standard tube sizes or components.
- 34mm OD - 304L Rotable Blank CF Flange8 to 10 weeks deliveryRotatable blank Conflat flange (CF) consists of two parts, the inner knife edge detail and the outer bolt hole retaining ring which rotates around the inner part. This allows the boltholes to align to mating flanges in any orientation. These are used to blank off unused chamber ports for leak-tight assembly, also allowing End User machining for non standard tube sizes or components.
- 34mm OD - 304L Tapped Fixed Blank CF Flange8 to 10 weeks deliveryFixed blank Conflat flange (CF) are available in the full range of sizes. These are used to blank off unused chamber ports for leak-tight assembly, also allowing End User machining for non standard tube sizes or components.
- 34mm OD - 316LN (2D) Blank CF Flange8 to 10 weeks deliveryRotatable blank Conflat flange (CF) consists of two parts, the inner knife edge detail and the outer bolt hole retaining ring which rotates around the inner part. This allows the boltholes to align to mating flanges in any orientation. These are used to blank off unused chamber ports for leak-tight assembly, also allowing End User machining for non standard tube sizes or components.
- 34mm OD - 316LN (2D) Fixed Blank CF Flange8 to 10 weeks deliveryFixed blank Conflat flange (CF) are available in the full range of sizes. These are used to blank off unused chamber ports for leak-tight assembly, also allowing End User machining for non standard tube sizes or components.
- 34mm OD - 316LN (2D) Tapped Fixed Blank CF Flange8 to 10 weeks deliveryFixed blank Conflat flange (CF) are available in the full range of sizes. These are used to blank off unused chamber ports for leak-tight assembly, also allowing End User machining for non standard tube sizes or components.
- 34mm OD 19mm ID - 304L Fixed Bored CF Flange8 to 10 weeks delivery£10.23Fixed bored Conflat flange (CF) are available in the full range of sizes. The smaller range of flange can accept a number of different standard tube sizes. These are prepared ready for welding onto chamber tubulations or components.
- 34mm OD 19mm ID - 304L Tapped Fixed Bored CF Flange8 to 10 weeks delivery£11.17Fixed bored Conflat flange (CF) are available in the full range of sizes. The smaller range of flange can accept a number of different standard tube sizes. These are prepared ready for welding onto chamber tubulations or components.
- 34mm OD 19mm ID - 316LN (2D) Fixed Bored CF Flange8 to 10 weeks deliveryFixed bored Conflat flange (CF) are available in the full range of sizes. The smaller range of flange can accept a number of different standard tube sizes. These are prepared ready for welding onto chamber tubulations or components.
- 34mm OD 19mm ID - 316LN (2D) Tapped Fixed Bored CF Flange8 to 10 weeks delivery£22.00Fixed bored Conflat flange (CF) are available in the full range of sizes. The smaller range of flange can accept a number of different standard tube sizes. These are prepared ready for welding onto chamber tubulations or components.
- 34mm OD 6mm ID - 304L Rotable Bored CF Flange8 to 10 weeks deliveryRotatable bored Conflat Flange (CF) are available in the full range of sizes. The smaller range of flange can accept a number of different standard tube sizes. These are prepared ready for welding onto chamber tubulations or components. The rotatable flange consists of two parts, the inner knife edge detail and the outer bolt hole retaining ring which rotates around the inner part.
- 34mm OD 6mm ID - 304L Tapped Rotable Bored CF Flange8 to 10 weeks delivery£0.00Rotatable bored Conflat Flange (CF) are available in the full range of sizes. The smaller range of flange can accept a number of different standard tube sizes. These are prepared ready for welding onto chamber tubulations or components. The rotatable flange consists of two parts, the inner knife edge detail and the outer bolt hole retaining ring which rotates around the inner part.
- 34mm OD 6mm ID - 316LN (2D) Rotable Bored CF Flange8 to 10 weeks deliveryRotatable bored Conflat Flange (CF) are available in the full range of sizes. The smaller range of flange can accept a number of different standard tube sizes. These are prepared ready for welding onto chamber tubulations or components. The rotatable flange consists of two parts, the inner knife edge detail and the outer bolt hole retaining ring which rotates around the inner part.
- 4 Way 24mm Inline K Type Feedthrough8 to 10 weeks deliveryInstrumentation feedthroughs are used to carry electrical signals (Including Thermocouple) which are normally low current and/or voltage. These feedthroughs are available in multi pin versions on either 34mm or 70mm OD flanges. These also come with the option of a European voltage compliant connectors
- 4 Way 24mm Inline N Type Feedthrough8 to 10 weeks deliveryInstrumentation feedthroughs are used to carry electrical signals (Including Thermocouple) which are normally low current and/or voltage. These feedthroughs are available in multi pin versions on either 34mm or 70mm OD flanges. These also come with the option of a European voltage compliant connectors
- 4 Way 24mm Inline Power + K Type Feedthrough8 to 10 weeks deliveryInstrumentation feedthroughs are used to carry electrical signals (Including Thermocouple) which are normally low current and/or voltage. These feedthroughs are available in multi pin versions on either 34mm or 70mm OD flanges. These also come with the option of a European voltage compliant connectors
- 4 Way 24mm Inline Power + N Type Feedthrough8 to 10 weeks deliveryInstrumentation feedthroughs are used to carry electrical signals (Including Thermocouple) which are normally low current and/or voltage. These feedthroughs are available in multi pin versions on either 34mm or 70mm OD flanges. These also come with the option of a European voltage compliant connectors
- 4 Way 24mm Inline Power Feedthrough8 to 10 weeks deliveryInstrumentation feedthroughs are used to carry electrical signals (Including Thermocouple) which are normally low current and/or voltage. These feedthroughs are available in multi pin versions on either 34mm or 70mm OD flanges. These also come with the option of a European voltage compliant connectors
- 4 Way 24mm K Type Feedthrough8 to 10 weeks deliveryInstrumentation feedthroughs are used to carry electrical signals (Including Thermocouple) which are normally low current and/or voltage. These feedthroughs are available in multi pin versions on either 34mm or 70mm OD flanges. These also come with the option of a European voltage compliant connectors
- 4 Way 24mm N Type Feedthrough8 to 10 weeks deliveryInstrumentation feedthroughs are used to carry electrical signals (Including Thermocouple) which are normally low current and/or voltage. These feedthroughs are available in multi pin versions on either 34mm or 70mm OD flanges. These also come with the option of a European voltage compliant connectors
- 4 Way 24mm Power + K Type Feedthrough8 to 10 weeks deliveryInstrumentation feedthroughs are used to carry electrical signals (Including Thermocouple) which are normally low current and/or voltage. These feedthroughs are available in multi pin versions on either 34mm or 70mm OD flanges. These also come with the option of a European voltage compliant connectors
- 4 Way 24mm Power Feedthrough8 to 10 weeks deliveryInstrumentation feedthroughs are used to carry electrical signals (Including Thermocouple) which are normally low current and/or voltage. These feedthroughs are available in multi pin versions on either 34mm or 70mm OD flanges. These also come with the option of a European voltage compliant connectors
- 4 Way 25mm Power + N Type Feedthrough8 to 10 weeks deliveryInstrumentation feedthroughs are used to carry electrical signals (Including Thermocouple) which are normally low current and/or voltage. These feedthroughs are available in multi pin versions on either 34mm or 70mm OD flanges. These also come with the option of a European voltage compliant connectors
- 4 Way 30mm K Type Feedthrough8 to 10 weeks deliveryInstrumentation feedthroughs are used to carry electrical signals (Including Thermocouple) which are normally low current and/or voltage. These feedthroughs are available in multi pin versions on either 34mm or 70mm OD flanges. These also come with the option of a European voltage compliant connectors
- 4 Way 30mm Power Feedthrough8 to 10 weeks deliveryInstrumentation feedthroughs are used to carry electrical signals (Including Thermocouple) which are normally low current and/or voltage. These feedthroughs are available in multi pin versions on either 34mm or 70mm OD flanges. These also come with the option of a European voltage compliant connectors
- 4 Way 40A 15Kv DN38CF Feedthrough8 to 10 weeks deliveryInstrumentation feedthroughs are used to carry electrical signals (Including Thermocouple) which are normally low current and/or voltage. These feedthroughs are available in multi pin versions on either 34mm or 70mm OD flanges. These also come with the option of a European voltage compliant connectors
- 4 Way 40mm K Type Feedthrough8 to 10 weeks deliveryInstrumentation feedthroughs are used to carry electrical signals (Including Thermocouple) which are normally low current and/or voltage. These feedthroughs are available in multi pin versions on either 34mm or 70mm OD flanges. These also come with the option of a European voltage compliant connectors
- 4 Way 40mm N Type Feedthrough8 to 10 weeks deliveryInstrumentation feedthroughs are used to carry electrical signals (Including Thermocouple) which are normally low current and/or voltage. These feedthroughs are available in multi pin versions on either 34mm or 70mm OD flanges. These also come with the option of a European voltage compliant connectors
- 4 Way 40mm Power + K Type Feedthrough8 to 10 weeks deliveryInstrumentation feedthroughs are used to carry electrical signals (Including Thermocouple) which are normally low current and/or voltage. These feedthroughs are available in multi pin versions on either 34mm or 70mm OD flanges. These also come with the option of a European voltage compliant connectors
- 4 Way 40mm Power + N Type Feedthrough8 to 10 weeks deliveryInstrumentation feedthroughs are used to carry electrical signals (Including Thermocouple) which are normally low current and/or voltage. These feedthroughs are available in multi pin versions on either 34mm or 70mm OD flanges. These also come with the option of a European voltage compliant connectors
- 4 Way 40mm Power Feedthrough8 to 10 weeks deliveryInstrumentation feedthroughs are used to carry electrical signals (Including Thermocouple) which are normally low current and/or voltage. These feedthroughs are available in multi pin versions on either 34mm or 70mm OD flanges. These also come with the option of a European voltage compliant connectors
- 4 Way 75mm K Type Feedthrough8 to 10 weeks deliveryInstrumentation feedthroughs are used to carry electrical signals (Including Thermocouple) which are normally low current and/or voltage. These feedthroughs are available in multi pin versions on either 34mm or 70mm OD flanges. These also come with the option of a European voltage compliant connectors
- 4 Way 75mm Power + K Type Feedthrough8 to 10 weeks deliveryInstrumentation feedthroughs are used to carry electrical signals (Including Thermocouple) which are normally low current and/or voltage. These feedthroughs are available in multi pin versions on either 34mm or 70mm OD flanges. These also come with the option of a European voltage compliant connectors
- 4 Way 75mm Power + N Type Feedthrough8 to 10 weeks deliveryInstrumentation feedthroughs are used to carry electrical signals (Including Thermocouple) which are normally low current and/or voltage. These feedthroughs are available in multi pin versions on either 34mm or 70mm OD flanges. These also come with the option of a European voltage compliant connectors
- 4 Way 75mm Power Feedthrough8 to 10 weeks deliveryInstrumentation feedthroughs are used to carry electrical signals (Including Thermocouple) which are normally low current and/or voltage. These feedthroughs are available in multi pin versions on either 34mm or 70mm OD flanges. These also come with the option of a European voltage compliant connectors
- 4 Way 80mm K Type Feedthrough8 to 10 weeks deliveryInstrumentation feedthroughs are used to carry electrical signals (Including Thermocouple) which are normally low current and/or voltage. These feedthroughs are available in multi pin versions on either 34mm or 70mm OD flanges. These also come with the option of a European voltage compliant connectors
- 4 Way 80mm N Type Feedthrough8 to 10 weeks deliveryInstrumentation feedthroughs are used to carry electrical signals (Including Thermocouple) which are normally low current and/or voltage. These feedthroughs are available in multi pin versions on either 34mm or 70mm OD flanges. These also come with the option of a European voltage compliant connectors
- 4 Way 80mm Power + K Type Feedthrough8 to 10 weeks deliveryInstrumentation feedthroughs are used to carry electrical signals (Including Thermocouple) which are normally low current and/or voltage. These feedthroughs are available in multi pin versions on either 34mm or 70mm OD flanges. These also come with the option of a European voltage compliant connectors
- 4 Way 80mm Power + N Type Feedthrough8 to 10 weeks deliveryInstrumentation feedthroughs are used to carry electrical signals (Including Thermocouple) which are normally low current and/or voltage. These feedthroughs are available in multi pin versions on either 34mm or 70mm OD flanges. These also come with the option of a European voltage compliant connectors
- 4 Way 80mm Power Feedthrough8 to 10 weeks deliveryInstrumentation feedthroughs are used to carry electrical signals (Including Thermocouple) which are normally low current and/or voltage. These feedthroughs are available in multi pin versions on either 34mm or 70mm OD flanges. These also come with the option of a European voltage compliant connectors
- 70mm OD - 304L Fixed Blank CF Flange8 to 10 weeks delivery£16.42Fixed blank Conflat flange (CF) are available in the full range of sizes. These are used to blank off unused chamber ports for leak-tight assembly, also allowing End User machining for non standard tube sizes or components.
- 70mm OD - 304L Rotable Blank CF Flange8 to 10 weeks deliveryRotatable blank Conflat flange (CF) consists of two parts, the inner knife edge detail and the outer bolt hole retaining ring which rotates around the inner part. This allows the boltholes to align to mating flanges in any orientation. These are used to blank off unused chamber ports for leak-tight assembly, also allowing End User machining for non standard tube sizes or components.
- 70mm OD - 304L Tapped Fixed Blank CF Flange8 to 10 weeks delivery£22.42Fixed blank Conflat flange (CF) are available in the full range of sizes. These are used to blank off unused chamber ports for leak-tight assembly, also allowing End User machining for non standard tube sizes or components.
- 70mm OD - 316LN (2D) Fixed Blank CF Flange8 to 10 weeks delivery£37.95Fixed blank Conflat flange (CF) are available in the full range of sizes. These are used to blank off unused chamber ports for leak-tight assembly, also allowing End User machining for non standard tube sizes or components.
- 70mm OD - 316LN (2D) Rotable Blank CF Flange8 to 10 weeks deliveryRotatable blank Conflat flange (CF) consists of two parts, the inner knife edge detail and the outer bolt hole retaining ring which rotates around the inner part. This allows the boltholes to align to mating flanges in any orientation. These are used to blank off unused chamber ports for leak-tight assembly, also allowing End User machining for non standard tube sizes or components.
- 70mm OD - 316LN (2D) Tapped Fixed Blank CF Flange8 to 10 weeks delivery£95.24Fixed blank Conflat flange (CF) are available in the full range of sizes. These are used to blank off unused chamber ports for leak-tight assembly, also allowing End User machining for non standard tube sizes or components.
- 70mm OD 41mm ID - 304L Fixed Bored CF Flange8 to 10 weeks deliveryFixed bored Conflat flange (CF) are available in the full range of sizes. The smaller range of flange can accept a number of different standard tube sizes. These are prepared ready for welding onto chamber tubulations or components.
- 70mm OD 41mm ID - 304L Rotable Bored CF Flange8 to 10 weeks delivery£42.74Rotatable bored Conflat Flange (CF) are available in the full range of sizes. The smaller range of flange can accept a number of different standard tube sizes. These are prepared ready for welding onto chamber tubulations or components. The rotatable flange consists of two parts, the inner knife edge detail and the outer bolt hole retaining ring which rotates around the inner part.
- 70mm OD 41mm ID - 304L Tapped Bored CF Flange8 to 10 weeks delivery£51.28Rotatable bored Conflat Flange (CF) are available in the full range of sizes. The smaller range of flange can accept a number of different standard tube sizes. These are prepared ready for welding onto chamber tubulations or components. The rotatable flange consists of two parts, the inner knife edge detail and the outer bolt hole retaining ring which rotates around the inner part.
- 70mm OD 41mm ID - 304L Tapped Fixed Bored CF Flange8 to 10 weeks delivery£22.55Fixed bored Conflat flange (CF) are available in the full range of sizes. The smaller range of flange can accept a number of different standard tube sizes. These are prepared ready for welding onto chamber tubulations or components.
- 70mm OD 41mm ID - 316LN (2D) Fixed Bored CF Flange8 to 10 weeks deliveryFixed bored Conflat flange (CF) are available in the full range of sizes. The smaller range of flange can accept a number of different standard tube sizes. These are prepared ready for welding onto chamber tubulations or components.
- 70mm OD 41mm ID - 316LN (2D) Rotable Bored CF Flange8 to 10 weeks deliveryRotatable bored Conflat Flange (CF) are available in the full range of sizes. The smaller range of flange can accept a number of different standard tube sizes. These are prepared ready for welding onto chamber tubulations or components. The rotatable flange consists of two parts, the inner knife edge detail and the outer bolt hole retaining ring which rotates around the inner part.
- 70mm OD 41mm ID - 316LN (2D) Tapped Fixed Bored CF Flange8 to 10 weeks deliveryFixed bored Conflat flange (CF) are available in the full range of sizes. The smaller range of flange can accept a number of different standard tube sizes. These are prepared ready for welding onto chamber tubulations or components.
- 70mm to 34mm OD 304L Zero Length Bored Adaptors8 to 10 weeks delivery£52.45Zero Length Adaptor conflat Flange (CF) are used to adapt from one flange size to another. The larger flange OD has through bolt holes enabling ordinary nut and bolt to be used. The smaller flange OD has metric tapped holes. This connects different sizes of flanges where there is limited space and does not increase the chamber volume.
- 70mm to 34mm OD 316LN (2D) Zero Length Bored Adaptors8 to 10 weeks delivery£60.46Zero Length Adaptor conflat Flange (CF) are used to adapt from one flange size to another. The larger flange OD has through bolt holes enabling ordinary nut and bolt to be used. The smaller flange OD has metric tapped holes. This connects different sizes of flanges where there is limited space and does not increase the chamber volume.
- Barrel Connectors 1.2mm OD - 1 Barrel Set - EFT & VIG8 to 10 weeks deliveryInstrumentation feedthroughs are used to carry electrical signals (Including Thermocouple) which are normally low current and/or voltage. These feedthroughs are available in multi pin versions on either 34mm or 70mm OD flanges. These also come with the option of a European voltage compliant connectors
- Calcium Fluoride Zero Length ViewportAvailable Soon£0.00Calcium fluoride viewports are offered in CF flange styles. The UHV CF versions are offered using 304L stainless steel flanges.
- Connector Ion Gauge - VIG17/VIG18/VIG22/VIG248 to 10 weeks delivery£324.36IGC5 is an Ion gauge which combines the functionality of several vacuum system controllers into a single easy to use unit, reducing hardware, wiring and cost. The IGC5 combines the latest microprocessor technology in a 19" 1U rack mount unit, which is very stability and reliability. The IGC5 also offers Bake Out and Pirani Gauge option as standard.
- Crimp Connector Pins 1.2mm - 2 x 22mm OAL - Pack of 208 to 10 weeks deliveryInstrumentation feedthroughs are used to carry electrical signals (Including Thermocouple) which are normally low current and/or voltage. These feedthroughs are available in multi pin versions on either 34mm or 70mm OD flanges. These also come with the option of a European voltage compliant connectors
