UHV Accessory Products For All Applications
View our range of high quality and reliable UHV accessory products for prototype development and general laboratory use cases including all vacuum chambers and associated applications. VACGEN has supplied a wide range of auxiliary products for many years including viewports, flanges and gaskets, UHV fittings and sublimation pumps
Gaskets | Viewports | Flanges |
 |  |  |
| Our Gaskets are manufactured from oxygen-free, high-conductivity copper and are specifically designed for UHV applications. We supply in a range of standard types including commercial grade for large quantities, etched for a super clean environment, annealed for use with viewports and silver plated for synchrotron and low mag environments. | VACGEN offer a complete range of UHV compatible viewports to suit all clean and UHV applications. They have a wide angle of vision, maximum protection from accidental damage and minimum transmission of strain from flange bolts. | Conflat flanges (CF) are designed to enable affordable, repeatable seals, that have low leak rate and the ability to withstand the high temperatures used for de-gassing (up to 450°C) without leaking. Our range of UHV flanges are fully compatible with the internationally agreed standards and will connect to any other compliant CF flange. Available, as standard, in 304L and 316LN ESR. |
Fittings | Sublimation Pump | Feedthroughs |
 |  |  |
| Fittings can be used for connecting different parts of the UHV system. Our range of fittings include tubulated flanges, straight connectors, tee pieces, 4-way and 6-way crosses, radius elbows and flexible connectors. | Our sublimation pump is designed to operate between 1x10-4 to 1x10-12 mbar and have interchangeable filaments for the sub pump head. The sub pump is operated using the SPC8 controller which provides all the necessary features for sub pump operation. | Feedthroughs are designed to carry services into the vacuum environments. Instrumentation, power and liquid feedthroughs are available in a variety of orientations. |
Ion Gauges | Hinged Doors | Port Aligner |
|  |  |
| Our pressure measurement products are designed to operate from atmospheric pressure to 1x10-10 mbar. The IGC5 controller can run a Pirani Gauge and Ion Gauge, covering the wide range of operating pressures encountered when taking a system down to UHV environments. We also supply a range of spares for our Ion Gauges including filaments, grids and connectors. | The HD range of fast entry air lock doors can be used to load items into a prep chamber. They come in two configurations - either a plain door, or with a built-in viewport. This is an ideal solution for keeping the main system under UHV conditions whilst a sample is loaded. | A port aligner allows the precise mechanical alignment of sample transfer and docking systems, such as MLRV and RLRP. They are a cost-effective way to save time during system installation, where sample transfer tools are being set up for the first time. |
- 152mm to 70mm OD 316LN (2D) Zero Length Bored Adaptors8 to 10 weeks delivery£1,159.95Zero Length Adaptor conflat Flange (CF) are used to adapt from one flange size to another. The larger flange OD has through bolt holes enabling ordinary nut and bolt to be used. The smaller flange OD has metric tapped holes. This connects different sizes of flanges where there is limited space and does not increase the chamber volume.
- 4 Way 24mm Inline K Type Feedthrough8 to 10 weeks deliveryInstrumentation feedthroughs are used to carry electrical signals (Including Thermocouple) which are normally low current and/or voltage. These feedthroughs are available in multi pin versions on either 34mm or 70mm OD flanges. These also come with the option of a European voltage compliant connectors
- 4 Way 24mm Inline N Type Feedthrough8 to 10 weeks deliveryInstrumentation feedthroughs are used to carry electrical signals (Including Thermocouple) which are normally low current and/or voltage. These feedthroughs are available in multi pin versions on either 34mm or 70mm OD flanges. These also come with the option of a European voltage compliant connectors
- 4 Way 24mm Inline Power + N Type Feedthrough8 to 10 weeks deliveryInstrumentation feedthroughs are used to carry electrical signals (Including Thermocouple) which are normally low current and/or voltage. These feedthroughs are available in multi pin versions on either 34mm or 70mm OD flanges. These also come with the option of a European voltage compliant connectors
- 4 Way 24mm Inline Power Feedthrough8 to 10 weeks deliveryInstrumentation feedthroughs are used to carry electrical signals (Including Thermocouple) which are normally low current and/or voltage. These feedthroughs are available in multi pin versions on either 34mm or 70mm OD flanges. These also come with the option of a European voltage compliant connectors
- 4 Way 24mm K Type Feedthrough8 to 10 weeks deliveryInstrumentation feedthroughs are used to carry electrical signals (Including Thermocouple) which are normally low current and/or voltage. These feedthroughs are available in multi pin versions on either 34mm or 70mm OD flanges. These also come with the option of a European voltage compliant connectors
- 4 Way 24mm N Type Feedthrough8 to 10 weeks deliveryInstrumentation feedthroughs are used to carry electrical signals (Including Thermocouple) which are normally low current and/or voltage. These feedthroughs are available in multi pin versions on either 34mm or 70mm OD flanges. These also come with the option of a European voltage compliant connectors
- 4 Way 24mm Power + K Type Feedthrough8 to 10 weeks deliveryInstrumentation feedthroughs are used to carry electrical signals (Including Thermocouple) which are normally low current and/or voltage. These feedthroughs are available in multi pin versions on either 34mm or 70mm OD flanges. These also come with the option of a European voltage compliant connectors
- 4 Way 24mm Power Feedthrough8 to 10 weeks deliveryInstrumentation feedthroughs are used to carry electrical signals (Including Thermocouple) which are normally low current and/or voltage. These feedthroughs are available in multi pin versions on either 34mm or 70mm OD flanges. These also come with the option of a European voltage compliant connectors
- 4 Way 40A 15Kv DN38CF Feedthrough8 to 10 weeks deliveryInstrumentation feedthroughs are used to carry electrical signals (Including Thermocouple) which are normally low current and/or voltage. These feedthroughs are available in multi pin versions on either 34mm or 70mm OD flanges. These also come with the option of a European voltage compliant connectors
- 4 Way 40mm K Type Feedthrough8 to 10 weeks deliveryInstrumentation feedthroughs are used to carry electrical signals (Including Thermocouple) which are normally low current and/or voltage. These feedthroughs are available in multi pin versions on either 34mm or 70mm OD flanges. These also come with the option of a European voltage compliant connectors
- 4 Way 40mm N Type Feedthrough8 to 10 weeks deliveryInstrumentation feedthroughs are used to carry electrical signals (Including Thermocouple) which are normally low current and/or voltage. These feedthroughs are available in multi pin versions on either 34mm or 70mm OD flanges. These also come with the option of a European voltage compliant connectors
- 4 Way 40mm Power + N Type Feedthrough8 to 10 weeks deliveryInstrumentation feedthroughs are used to carry electrical signals (Including Thermocouple) which are normally low current and/or voltage. These feedthroughs are available in multi pin versions on either 34mm or 70mm OD flanges. These also come with the option of a European voltage compliant connectors
- 4 Way 40mm Power Feedthrough8 to 10 weeks deliveryInstrumentation feedthroughs are used to carry electrical signals (Including Thermocouple) which are normally low current and/or voltage. These feedthroughs are available in multi pin versions on either 34mm or 70mm OD flanges. These also come with the option of a European voltage compliant connectors
- 4 Way 75mm Power + K Type Feedthrough8 to 10 weeks deliveryInstrumentation feedthroughs are used to carry electrical signals (Including Thermocouple) which are normally low current and/or voltage. These feedthroughs are available in multi pin versions on either 34mm or 70mm OD flanges. These also come with the option of a European voltage compliant connectors
- 4 Way 75mm Power + N Type Feedthrough8 to 10 weeks deliveryInstrumentation feedthroughs are used to carry electrical signals (Including Thermocouple) which are normally low current and/or voltage. These feedthroughs are available in multi pin versions on either 34mm or 70mm OD flanges. These also come with the option of a European voltage compliant connectors
- 4 Way 80mm K Type Feedthrough8 to 10 weeks deliveryInstrumentation feedthroughs are used to carry electrical signals (Including Thermocouple) which are normally low current and/or voltage. These feedthroughs are available in multi pin versions on either 34mm or 70mm OD flanges. These also come with the option of a European voltage compliant connectors
- 4 Way 80mm N Type Feedthrough8 to 10 weeks deliveryInstrumentation feedthroughs are used to carry electrical signals (Including Thermocouple) which are normally low current and/or voltage. These feedthroughs are available in multi pin versions on either 34mm or 70mm OD flanges. These also come with the option of a European voltage compliant connectors
- 4 Way 80mm Power + N Type Feedthrough8 to 10 weeks deliveryInstrumentation feedthroughs are used to carry electrical signals (Including Thermocouple) which are normally low current and/or voltage. These feedthroughs are available in multi pin versions on either 34mm or 70mm OD flanges. These also come with the option of a European voltage compliant connectors
- 4 Way 80mm Power Feedthrough8 to 10 weeks deliveryInstrumentation feedthroughs are used to carry electrical signals (Including Thermocouple) which are normally low current and/or voltage. These feedthroughs are available in multi pin versions on either 34mm or 70mm OD flanges. These also come with the option of a European voltage compliant connectors
- Head Sublimation Pump - 3 Filament DN38CF8 to 10 weeks delivery£1,203.52The Titanium Sublimation Pump is a true UHV pump. It is used to supplement the pumping action of other UHV pumps, (normally Ion Pumps) as it can be more effective at pumping certain gases. The main advantages of this type of pump is, it is a simple, low cost solution, that gives you high pumping speeds.
- Hinged Door DN100CF8 to 10 weeks delivery£1,770.45HD range of fast entry lock doors can be used to load items into a prep chamber. The door is sealed by a reusable Viton® O-ring. This is an ideal solution for keeping the main system under UHV conditions via a gate valve between the load lock and system.
- Hinged Door DN150CF8 to 10 weeks delivery£2,258.85HD range of fast entry lock doors can be used to load items into a prep chamber. The door is sealed by a reusable Viton® O-ring. This is an ideal solution for keeping the main system under UHV conditions via a gate valve between the load lock and system.
- Hinged Door DN64CF8 to 10 weeks delivery£1,740.23HD range of fast entry lock doors can be used to load items into a prep chamber. The door is sealed by a reusable Viton® O-ring. This is an ideal solution for keeping the main system under UHV conditions via a gate valve between the load lock and system.
- Hinged Viewport Door DN100CF8 to 10 weeks delivery£2,045.55HD range of fast entry lock doors can be used to load items into a prep chamber. The door is sealed by a reusable Viton® O-ring. This is an ideal solution for keeping the main system under UHV conditions via a gate valve between the load lock and system.
- Hinged Viewport Door DN150CF8 to 10 weeks delivery£3,358.63HD range of fast entry lock doors can be used to load items into a prep chamber. The door is sealed by a reusable Viton® O-ring. This is an ideal solution for keeping the main system under UHV conditions via a gate valve between the load lock and system.
- Hinged Viewport Door DN63CF8 to 10 weeks delivery£2,010.00HD range of fast entry lock doors can be used to load items into a prep chamber. The door is sealed by a reusable Viton® O-ring. This is an ideal solution for keeping the main system under UHV conditions via a gate valve between the load lock and system.
- Ion Gauge Controller 110v8 to 10 weeks delivery£4,545.94IGC5 is an Ion gauge which combines the functionality of several vacuum system controllers into a single easy to use unit, reducing hardware, wiring and cost. The IGC5 combines the latest microprocessor technology in a 19" 1U rack mount unit, which is very stability and reliability. The IGC5 also offers Bake Out and Pirani Gauge option as standard.
- Ion Gauge Controller 240v8 to 10 weeks delivery£4,545.94IGC5 is an Ion gauge which combines the functionality of several vacuum system controllers into a single easy to use unit, reducing hardware, wiring and cost. The IGC5 combines the latest microprocessor technology in a 19" 1U rack mount unit, which is very stability and reliability. The IGC5 also offers Bake Out and Pirani Gauge option as standard.
- Nude Ion Gauge > 10E-10 2 x Th Ir Filaments DN38CF8 to 10 weeks delivery£1,005.25When operating below the Pirani gauge range (10-3 mbar), an ion gauge can be used to measure UHV pressure. VACGEN offer a range of gauge heads and filament materials to cover all vacuum requirements.
- Nude Ion Gauge > 10E-10 2 x W Filaments DN38CF8 to 10 weeks delivery£1,294.60When operating below the Pirani gauge range (10-3 mbar), an ion gauge can be used to measure UHV pressure. VACGEN offer a range of gauge heads and filament materials to cover all vacuum requirements.
- Nude Ion Gauge > 10E-11 2 x Th Ir Filaments DN38CF8 to 10 weeks delivery£1,305.05When operating below the Pirani gauge range (10-3 mbar), an ion gauge can be used to measure UHV pressure. VACGEN offer a range of gauge heads and filament materials to cover all vacuum requirements.
- Nude Ion Gauge > 10E-11 2 x W Filaments DN38CF8 to 10 weeks delivery£1,597.23When operating below the Pirani gauge range (10-3 mbar), an ion gauge can be used to measure UHV pressure. VACGEN offer a range of gauge heads and filament materials to cover all vacuum requirements.
- Nude Ion Gauge No Flange - Th Ir Filament In-Vac Mounting Skirt8 to 10 weeks delivery£1,256.32When operating below the Pirani gauge range (10-3 mbar), an ion gauge can be used to measure UHV pressure. VACGEN offer a range of gauge heads and filament materials to cover all vacuum requirements.
- Port Aligner 114mm OD8 to 10 weeks delivery£2,060.06Allows the precise mechanical alignment for sample transfer and docking systems i.e. MLRV and RLRP. Cost effective way to save time during system installation where sample transfer tools are being set up for the first time.
- Port Aligner 70mm OD8 to 10 weeks delivery£2,037.65Allows the precise mechanical alignment for sample transfer and docking systems i.e. MLRV and RLRP. Cost effective way to save time during system installation where sample transfer tools are being set up for the first time.
