UHV Accessory Products For All Applications


View our range of high quality and reliable UHV accessory products for prototype development and general laboratory use cases including all vacuum chambers and associated applications. VACGEN has supplied a wide range of auxiliary products for many years including viewports, flanges and gaskets, UHV fittings and sublimation pumps

Gaskets

Viewports

Flanges

Ultra High Vacuum Conflat Flanges
Our Gaskets are manufactured from oxygen-free, high-conductivity copper and are specifically designed for UHV applications. We supply in a range of standard types including commercial grade for large quantities, etched for a super clean environment, annealed for use with viewports and silver plated for synchrotron and low mag environments.VACGEN offer a complete range of UHV compatible viewports to suit all clean and UHV applications. They have a wide angle of vision, maximum protection from accidental damage and minimum transmission of strain from flange bolts.Conflat flanges (CF) are designed to enable affordable, repeatable seals, that have low leak rate and the ability to withstand the high temperatures used for de-gassing (up to 450°C) without leaking. Our range of UHV flanges are fully compatible with the internationally agreed standards and will connect to any other compliant CF flange. Available, as standard, in 304L and 316LN ESR.

Fittings

Sublimation Pump

Feedthroughs

Ultra High Vacuum Fittings
Fittings can be used for connecting different parts of the UHV system. Our range of fittings include tubulated flanges, straight connectors, tee pieces, 4-way and 6-way crosses, radius elbows and flexible connectors.Our sublimation pump is designed to operate between 1x10-4 to 1x10-12 mbar and have interchangeable filaments for the sub pump head. The sub pump is operated using the SPC8 controller which provides all the necessary features for sub pump operation.Feedthroughs are designed to carry services into the vacuum environments. Instrumentation, power and liquid feedthroughs are available in a variety of orientations.

Ion Gauges

Hinged Doors

Port Aligner

Our pressure measurement products are designed to operate from atmospheric pressure to 1x10-10 mbar. The IGC5 controller can run a Pirani Gauge and Ion Gauge, covering the wide range of operating pressures encountered when taking a system down to UHV environments. We also supply a range of spares for our Ion Gauges including filaments, grids and connectors.The HD range of fast entry air lock doors can be used to load items into a prep chamber. They come in two configurations - either a plain door, or with a built-in viewport. This is an ideal solution for keeping the main system under UHV conditions whilst a sample is loaded.A port aligner allows the precise mechanical alignment of sample transfer and docking systems, such as MLRV and RLRP. They are a cost-effective way to save time during system installation, where sample transfer tools are being set up for the first time.
View as List Grid

41 Items

per page
Set Descending Direction
  1. 11 Way 5A DN38CF Feedthrough
    8 to 10 weeks delivery
    Instrumentation feedthroughs are used to carry electrical signals (Including Thermocouple) which are normally low current and/or voltage. These feedthroughs are available in multi pin versions on either 34mm or 70mm OD flanges. These also come with the option of a European voltage compliant connectors
  2. 11 Way Insulated Centre Pin 5A DN38CF Feedthrough
    8 to 10 weeks delivery
    Instrumentation feedthroughs are used to carry electrical signals (Including Thermocouple) which are normally low current and/or voltage. These feedthroughs are available in multi pin versions on either 34mm or 70mm OD flanges. These also come with the option of a European voltage compliant connectors
  3. 3 Way 40A 15Kv DN38CF Feedthrough
    8 to 10 weeks delivery
    Instrumentation feedthroughs are used to carry electrical signals (Including Thermocouple) which are normally low current and/or voltage. These feedthroughs are available in multi pin versions on either 34mm or 70mm OD flanges. These also come with the option of a European voltage compliant connectors
  4. 70mm OD - 304L Fixed Blank CF Flange
    8 to 10 weeks delivery
    £16.42
    Fixed blank Conflat flange (CF) are available in the full range of sizes. These are used to blank off unused chamber ports for leak-tight assembly, also allowing End User machining for non standard tube sizes or components.
  5. 70mm OD - 304L Rotable Blank CF Flange
    8 to 10 weeks delivery
    Rotatable blank Conflat flange (CF) consists of two parts, the inner knife edge detail and the outer bolt hole retaining ring which rotates around the inner part. This allows the boltholes to align to mating flanges in any orientation. These are used to blank off unused chamber ports for leak-tight assembly, also allowing End User machining for non standard tube sizes or components.
  6. 70mm OD - 304L Tapped Fixed Blank CF Flange
    8 to 10 weeks delivery
    £22.42
    Fixed blank Conflat flange (CF) are available in the full range of sizes. These are used to blank off unused chamber ports for leak-tight assembly, also allowing End User machining for non standard tube sizes or components.
  7. 70mm OD - 316LN (2D) Fixed Blank CF Flange
    8 to 10 weeks delivery
    £37.95
    Fixed blank Conflat flange (CF) are available in the full range of sizes. These are used to blank off unused chamber ports for leak-tight assembly, also allowing End User machining for non standard tube sizes or components.
  8. 70mm OD - 316LN (2D) Rotable Blank CF Flange
    8 to 10 weeks delivery
    Rotatable blank Conflat flange (CF) consists of two parts, the inner knife edge detail and the outer bolt hole retaining ring which rotates around the inner part. This allows the boltholes to align to mating flanges in any orientation. These are used to blank off unused chamber ports for leak-tight assembly, also allowing End User machining for non standard tube sizes or components.
  9. 70mm OD - 316LN (2D) Tapped Fixed Blank CF Flange
    8 to 10 weeks delivery
    £95.24
    Fixed blank Conflat flange (CF) are available in the full range of sizes. These are used to blank off unused chamber ports for leak-tight assembly, also allowing End User machining for non standard tube sizes or components.
  10. 70mm OD 41mm ID - 304L Fixed Bored CF Flange
    8 to 10 weeks delivery
    Fixed bored Conflat flange (CF) are available in the full range of sizes. The smaller range of flange can accept a number of different standard tube sizes. These are prepared ready for welding onto chamber tubulations or components.
  11. 70mm OD 41mm ID - 304L Rotable Bored CF Flange
    8 to 10 weeks delivery
    £42.74
    Rotatable bored Conflat Flange (CF) are available in the full range of sizes. The smaller range of flange can accept a number of different standard tube sizes. These are prepared ready for welding onto chamber tubulations or components. The rotatable flange consists of two parts, the inner knife edge detail and the outer bolt hole retaining ring which rotates around the inner part.
  12. 70mm OD 41mm ID - 304L Tapped Bored CF Flange
    8 to 10 weeks delivery
    £51.28
    Rotatable bored Conflat Flange (CF) are available in the full range of sizes. The smaller range of flange can accept a number of different standard tube sizes. These are prepared ready for welding onto chamber tubulations or components. The rotatable flange consists of two parts, the inner knife edge detail and the outer bolt hole retaining ring which rotates around the inner part.
  13. 70mm OD 41mm ID - 304L Tapped Fixed Bored CF Flange
    8 to 10 weeks delivery
    £22.55
    Fixed bored Conflat flange (CF) are available in the full range of sizes. The smaller range of flange can accept a number of different standard tube sizes. These are prepared ready for welding onto chamber tubulations or components.
  14. 70mm OD 41mm ID - 316LN (2D) Fixed Bored CF Flange
    8 to 10 weeks delivery
    Fixed bored Conflat flange (CF) are available in the full range of sizes. The smaller range of flange can accept a number of different standard tube sizes. These are prepared ready for welding onto chamber tubulations or components.
  15. 70mm OD 41mm ID - 316LN (2D) Rotable Bored CF Flange
    8 to 10 weeks delivery
    Rotatable bored Conflat Flange (CF) are available in the full range of sizes. The smaller range of flange can accept a number of different standard tube sizes. These are prepared ready for welding onto chamber tubulations or components. The rotatable flange consists of two parts, the inner knife edge detail and the outer bolt hole retaining ring which rotates around the inner part.
  16. 70mm OD 41mm ID - 316LN (2D) Tapped Fixed Bored CF Flange
    8 to 10 weeks delivery
    Fixed bored Conflat flange (CF) are available in the full range of sizes. The smaller range of flange can accept a number of different standard tube sizes. These are prepared ready for welding onto chamber tubulations or components.
  17. 70mm to 34mm OD 304L Zero Length Bored Adaptors
    8 to 10 weeks delivery
    £52.45
    Zero Length Adaptor conflat Flange (CF) are used to adapt from one flange size to another. The larger flange OD has through bolt holes enabling ordinary nut and bolt to be used. The smaller flange OD has metric tapped holes. This connects different sizes of flanges where there is limited space and does not increase the chamber volume.
  18. 70mm to 34mm OD 316LN (2D) Zero Length Bored Adaptors
    8 to 10 weeks delivery
    £60.46
    Zero Length Adaptor conflat Flange (CF) are used to adapt from one flange size to another. The larger flange OD has through bolt holes enabling ordinary nut and bolt to be used. The smaller flange OD has metric tapped holes. This connects different sizes of flanges where there is limited space and does not increase the chamber volume.
  19. Cross 4 Way DN38 1 Fixed (Inline) & 1 Rot Per Axis
    8 to 10 weeks delivery
    Four way cross with flanges equally spaced at 90° to each other. On each axis, one of the flanges is fixed and the other is rotatable. The fixed flange comes in two versions of bolt hole orientation, inline or straddled configuration, enabling the connection in any orientation of the vacuum equipment.
  20. Cross 4 Way DN38 1 Fixed (Straddled) & 1 Rot/Axis
    8 to 10 weeks delivery
    Four way cross with flanges equally spaced at 90° to each other. On each axis, one of the flanges is fixed and the other is rotatable. The fixed flange comes in two versions of bolt hole orientation, inline or straddled configuration, enabling the connection in any orientation of the vacuum equipment.
  21. Cross 6 Way DN38 1 Fixed (Inline) & 1 Rot/Axis
    8 to 10 weeks delivery
    Six way cross with flanges equally spaced at 90° to each other. On each axis, one of the flanges is fixed and the other is rotatable. The fixed flange comes in two versions of bolt hole orientation, inline or straddled configuration, enabling the connection in any orientation of the vacuum equipment.
  22. Cross 6 Way DN38 1 Fixed (Straddled) & 1 Rot/Axis
    8 to 10 weeks delivery
    Six way cross with flanges equally spaced at 90° to each other. On each axis, one of the flanges is fixed and the other is rotatable. The fixed flange comes in two versions of bolt hole orientation, inline or straddled configuration, enabling the connection in any orientation of the vacuum equipment.
  23. Elbow Curved 2 Rotatable DN38CF
    8 to 10 weeks delivery
    90° Radius elbows, on each axis, one of the flanges is fixed and the other is rotatable. The fixed flange comes in two versions of bolt hole orientation, inline or straddled configuration, enabling the connection in any orientation of the vacuum equipment.
  24. Flange Tubulated Fixed DN41CF
    8 to 10 weeks delivery
    Flange with tubulation enabling welding without risking conflat knife edge damage. Specifically designed and manufactured for vacuum system designers and manufacturers of vacuum components.
  25. Flange Tubulated Rotatable DN41CF
    8 to 10 weeks delivery
    Flange with tubulation enabling welding without risking conflat knife edge damage. Specifically designed and manufactured for vacuum system designers and manufacturers of vacuum components.
  26. Flexible Hose Hydra Formed 1 Fix & 1 Rot DN25CF 1000mm OAL
    8 to 10 weeks delivery
    Flexible connectors are used to compensate for any misalignment between flanges that have to be linked together. On each axis, one of the flanges is fixed and the other is rotatable, enabling the connection in any orientation of the vacuum equipment.
  27. Flexible Hose Hydra Formed 1 Fix & 1 Rot DN25CF 430mm OAL
    8 to 10 weeks delivery
    Flexible connectors are used to compensate for any misalignment between flanges that have to be linked together. On each axis, one of the flanges is fixed and the other is rotatable, enabling the connection in any orientation of the vacuum equipment.
  28. Flexible Hose Hydra Formed 1 Fix & 1 Rot DN25CF 750mm OAL
    8 to 10 weeks delivery
    Flexible connectors are used to compensate for any misalignment between flanges that have to be linked together. On each axis, one of the flanges is fixed and the other is rotatable, enabling the connection in any orientation of the vacuum equipment.
  29. Flexible Hose Hydra Formed 1 Fix & 1 Rot DN38CF 1000mm OAL
    8 to 10 weeks delivery
    Flexible connectors are used to compensate for any misalignment between flanges that have to be linked together. On each axis, one of the flanges is fixed and the other is rotatable, enabling the connection in any orientation of the vacuum equipment.
  30. Flexible Hose Hydra Formed FC38 450mm OAL
    8 to 10 weeks delivery
    Flexible connectors are used to compensate for any misalignment between flanges that have to be linked together. On each axis, one of the flanges is fixed and the other is rotatable, enabling the connection in any orientation of the vacuum equipment.
  31. Gasket OFHC Copper Pk 10 70 OD Flange Silver Plated
    8 to 10 weeks delivery
    Super clean ultra high quality oxygen free Silver plated gasket. These are rumbled to remove all the burrs, etched to remove surface skin prior to silver plating, UHV cleaned and individually packed. Completely free from any nickel flash base coat. Recommended for use in HV & UHV systems where the vacuum environment could oxidise a plain copper gasket.
  32. Gasket OFHC Copper Pk 5 70 OD Flange Annealed Etched
    8 to 10 weeks delivery
    Super clean ultra high quality oxygen free annealed copper gaskets for lower tightening torque to make a UHV leak tight seal. These are rumbled to remove all the burrs, UHV cleaned and individually packed. Recommended for use where you are using zero length viewports and fragile ceramic feedthroughs.
  33. Gasket OFHC Copper Pk 50 70 OD Flange Unetched
    8 to 10 weeks delivery
    High quality oxygen-free copper gaskets for university and commercial use. These are rumbled to remove all the burrs, UHV cleaned and individually packed. Designed for UHV applications where high usage or bulk purchase pricing is required.
  34. Gasket Viton® Pk 2 70 OD Flange
    8 to 10 weeks delivery
    Viton® gaskets are used in HV applications with low bakeout temperatures (
  35. Kodial 304L DN38CF Viewport
    8 to 10 weeks delivery
    £122.44
    A zero length viewport has a thickness no larger than that of its mounting flange. This makes it easier to protect from accidental damage. It provides the best angle of view as there are no tubulation walls to restrict observation. Kodial viewports are offered in CF flange styles. The viewports comprise borosilicate glass optic which is sealed to a Kovar weld ring using an induction heater process. The optic assemblies are helium leak tested and cleaned for ultra high vacuum (UHV) conditions.
  36. Kodial 316LN DN38CF Viewport
    8 to 10 weeks delivery
    £0.00
    A zero length viewport has a thickness no larger than that of its mounting flange. This makes it easier to protect from accidental damage. It provides the best angle of view as there are no tubulation walls to restrict observation. Kodial viewports are offered in CF flange styles. The viewports comprise borosilicate glass optic which is sealed to a Kovar weld ring using an induction heater process. The optic assemblies are helium leak tested and cleaned for ultra high vacuum (UHV) conditions.
  37. Quartz Fused Silica 304L DN38CF Viewport
    8 to 10 weeks delivery
    £489.01
    A zero length viewport has a thickness no larger than that of its mounting flange. It provides a wide angle viewing window for your vacuum chamber as there are no tubulation walls to restrict observation. Manufactured using high purity fused silica quartz.
  38. Sapphire Wide View 304L DN38CF Viewport
    8 to 10 weeks delivery
    £742.72
    A zero length viewport has a thickness no larger than that of its mounting flange. It provides a wide angle viewing window for your vacuum chamber as there are no tubulation walls to restrict observation. Manufactured using Sapphire, these viewports are used in high temperature high transmission applications.
  39. Straight Connector 1 Fixed & 1 Rotatable DN38CF
    8 to 10 weeks delivery
    Straight Connector with one fixed flange and the other is rotatable, enabling the connection in any orientation of the vacuum equipment.
  40. TEE Inline 2 Rot & 1 Fixed DN40
    8 to 10 weeks delivery
    Three way "T" with flanges equally spaced at 90° to each other. On each axis, one of the flanges is fixed and the other is rotatable. The fixed flange comes with two versions of bolt hole orientation, inline or straddled configuration, enabling the connection in any orientation of the vacuum equipment.
  41. TEE Straddled 2 Rot & 1 Fixed DN40
    8 to 10 weeks delivery
    Three way "T" with flanges equally spaced at 90° to each other. On each axis, one of the flanges is fixed and the other is rotatable. The fixed flange comes with two versions of bolt hole orientation, inline or straddled configuration, enabling the connection in any orientation of the vacuum equipment.
View as List Grid

41 Items

per page
Set Descending Direction