All Products
- 152mm OD - 304L Fixed Blank CF FlangeSKU: CF152£58.16Fixed blank Conflat flange (CF) are available in the full range of sizes. These are used to blank off unused chamber ports for leak-tight assembly, also allowing End User machining for non standard tube sizes or components.
- 152mm OD - 304L Rotable Blank CF FlangeSKU: CFR1524 to 6 weeks delivery£68.11Rotatable blank Conflat flange (CF) consists of two parts, the inner knife edge detail and the outer bolt hole retaining ring which rotates around the inner part. This allows the boltholes to align to mating flanges in any orientation. These are used to blank off unused chamber ports for leak-tight assembly, also allowing End User machining for non standard tube sizes or components.
- 152mm OD - 304L Tapped Fixed Blank CF FlangeSKU: CF152T£73.40Fixed blank Conflat flange (CF) are available in the full range of sizes. These are used to blank off unused chamber ports for leak-tight assembly, also allowing End User machining for non standard tube sizes or components.
- 152mm OD - 316LN (2D) Fixed Blank CF FlangeSKU: CF152-LN£147.43Fixed blank Conflat flange (CF) are available in the full range of sizes. These are used to blank off unused chamber ports for leak-tight assembly, also allowing End User machining for non standard tube sizes or components.
- 152mm OD - 316LN (2D) Rotable Blank CF FlangeSKU: CFR152-LN4 to 6 weeks delivery£266.93Rotatable blank Conflat flange (CF) consists of two parts, the inner knife edge detail and the outer bolt hole retaining ring which rotates around the inner part. This allows the boltholes to align to mating flanges in any orientation. These are used to blank off unused chamber ports for leak-tight assembly, also allowing End User machining for non standard tube sizes or components.
- 152mm OD 102mm ID - 304L Rotable Bored CF FlangeSKU: CFR152-102£68.11Rotatable bored Conflat Flange (CF) are available in the full range of sizes. The smaller range of flange can accept a number of different standard tube sizes. These are prepared ready for welding onto chamber tubulations or components. The rotatable flange consists of two parts, the inner knife edge detail and the outer bolt hole retaining ring which rotates around the inner part.
- 152mm OD 102mm ID - 304L Fixed Bored CF FlangeSKU: CF152-102£56.59Fixed bored Conflat flange (CF) are available in the full range of sizes. The smaller range of flange can accept a number of different standard tube sizes. These are prepared ready for welding onto chamber tubulations or components.
- 152mm OD 102mm ID - 304L Tapped Fixed Bored CF FlangeSKU: CF152T-102£76.89Fixed bored Conflat flange (CF) are available in the full range of sizes. The smaller range of flange can accept a number of different standard tube sizes. These are prepared ready for welding onto chamber tubulations or components.
- 152mm OD 102mm ID - 304L Tapped Rotable Bored CF FlangeM8SKU: CFR152T-1024 to 6 weeks delivery£83.97Rotatable bored Conflat Flange (CF) are available in the full range of sizes. The smaller range of flange can accept a number of different standard tube sizes. These are prepared ready for welding onto chamber tubulations or components. The rotatable flange consists of two parts, the inner knife edge detail and the outer bolt hole retaining ring which rotates around the inner part.
- 152mm OD 102mm ID - 316LN (2D) Rotable Bored CF FlangeSKU: CFR152-102-LN£316.27Rotatable bored Conflat Flange (CF) are available in the full range of sizes. The smaller range of flange can accept a number of different standard tube sizes. These are prepared ready for welding onto chamber tubulations or components. The rotatable flange consists of two parts, the inner knife edge detail and the outer bolt hole retaining ring which rotates around the inner part.
- 152mm OD 102mm ID - 316LN (2D) Fixed Bored CF Flange2D)SKU: CF152-102-LN£251.64Fixed bored Conflat flange (CF) are available in the full range of sizes. The smaller range of flange can accept a number of different standard tube sizes. These are prepared ready for welding onto chamber tubulations or components.
- 152mm OD 102mm ID - 316LN (2D) Tapped Fixed Bored CF FlangeSKU: CF152T-102-LN4 to 6 weeks delivery£168.17Fixed bored Conflat flange (CF) are available in the full range of sizes. The smaller range of flange can accept a number of different standard tube sizes. These are prepared ready for welding onto chamber tubulations or components.
- 152mm to 114mm OD 304L Zero Length Bored AdaptorsSKU: CFZL152-1144 to 6 weeks delivery£146.79Zero Length Adaptor conflat Flange (CF) are used to adapt from one flange size to another. The larger flange OD has through bolt holes enabling ordinary nut and bolt to be used. The smaller flange OD has metric tapped holes. This connects different sizes of flanges where there is limited space and does not increase the chamber volume.
- 152mm to 70mm OD 304L Zero Length Bored AdaptorsSKU: CFZL152-70£122.47Zero Length Adaptor conflat Flange (CF) are used to adapt from one flange size to another. The larger flange OD has through bolt holes enabling ordinary nut and bolt to be used. The smaller flange OD has metric tapped holes. This connects different sizes of flanges where there is limited space and does not increase the chamber volume.
- 152mm to 70mm OD 316LN (2D) Zero Length Bored AdaptorsSKU: CFZL152-70-LN£260.86Zero Length Adaptor conflat Flange (CF) are used to adapt from one flange size to another. The larger flange OD has through bolt holes enabling ordinary nut and bolt to be used. The smaller flange OD has metric tapped holes. This connects different sizes of flanges where there is limited space and does not increase the chamber volume.
-
- Cross 4 Way DN100 1 Fixed (Inline) & 1 Rot Per AxisSKU: ZBX410RI4 to 6 weeks delivery£859.41Four way cross with flanges equally spaced at 90° to each other. On each axis, one of the flanges is fixed and the other is rotatable. The fixed flange comes in two versions of bolt hole orientation, inline or straddled configuration, enabling the connection in any orientation of the vacuum equipment.
- Cross 4 Way DN100 1 Fixed (Straddled) & 1 Rot Per AxisSKU: ZBX410RS4 to 6 weeks delivery£878.63Four way cross with flanges equally spaced at 90° to each other. On each axis, one of the flanges is fixed and the other is rotatable. The fixed flange comes in two versions of bolt hole orientation, inline or straddled configuration, enabling the connection in any orientation of the vacuum equipment.
- Cross 6 Way DN100 1 Fixed (Inline) & 1 Rot/AxisSKU: ZBX610RI4 to 6 weeks delivery£1,406.21Six way cross with flanges equally spaced at 90° to each other. On each axis, one of the flanges is fixed and the other is rotatable. The fixed flange comes in two versions of bolt hole orientation, inline or straddled configuration, enabling the connection in any orientation of the vacuum equipment.
- Cross 6 Way DN100 1 Fixed (Straddled) & 1 Rot/AxisSKU: ZBX610RS4 to 6 weeks delivery£1,406.21Six way cross with flanges equally spaced at 90° to each other. On each axis, one of the flanges is fixed and the other is rotatable. The fixed flange comes in two versions of bolt hole orientation, inline or straddled configuration, enabling the connection in any orientation of the vacuum equipment.
- Elbow Curved 4" H/C R/STD B13061CSKU: ZBE10HRS4 to 6 weeks delivery£264.9090° Radius elbows, on each axis, one of the flanges is fixed and the other is rotatable. The fixed flange comes in two versions of bolt hole orientation, inline or straddled configuration, enabling the connection in any orientation of the vacuum equipment.
- Flange Tubulated Fixed FC100SKU: ZBFT104 to 6 weeks delivery£173.36Flange with tubulation enabling welding without risking conflat knife edge damage. Specifically designed and manufactured for vacuum system designers and manufacturers of vacuum components.
- Flange Tubulated Rotatable FC100SKU: ZBFT10R4 to 6 weeks delivery£251.64Flange with tubulation enabling welding without risking conflat knife edge damage. Specifically designed and manufactured for vacuum system designers and manufacturers of vacuum components.
- Gasket OFHC Copper Pk 10 150 OD Flange Silver PlatedSKU: ZCUSP100Super clean ultra high quality oxygen free Silver plated gasket. These are rumbled to remove all the burrs, etched to remove surface skin prior to silver plating, UHV cleaned and individually packed. Completely free from any nickel flash base coat. Recommended for use in HV & UHV systems where the vacuum environment could oxidise a plain copper gasket.
- Gasket OFHC Copper Pk 10 152 OD Flange EtchedSKU: ZCU100Super clean ultra high quality oxygen free surface etched copper gaskets for use in UHV application where there are no compromises in quality. These are rumbled to remove all the burrs, etched to remove surface skin, UHV cleaned and individually packed.
- Gasket OFHC Copper Pk 5 150 OD Flange Annealed EtchedSKU: ZCUA100Super clean ultra high quality oxygen free annealed copper gaskets for lower tightening torque to make a UHV leak tight seal. These are rumbled to remove all the burrs, UHV cleaned and individually packed. Recommended for use where you are using zero length viewports and fragile ceramic feedthroughs.
- Gasket OFHC Copper Pk 50 150 OD Flange UnetchedSKU: ZCUC100High quality oxygen-free copper gaskets for university and commercial use. These are rumbled to remove all the burrs, UHV cleaned and individually packed. Designed for UHV applications where high usage or bulk purchase pricing is required.
-
- Hinged Door DN100CFSKU: ZHD1004 to 6 weeks delivery£1,146.38HD range of fast entry lock doors can be used to load items into a prep chamber. The door is sealed by a reusable Viton® O-ring. This is an ideal solution for keeping the main system under UHV conditions via a gate valve between the load lock and system.
- Hinged Viewport Door DN100CFSKU: ZHD100V4 to 6 weeks delivery£1,428.89HD range of fast entry lock doors can be used to load items into a prep chamber. The door is sealed by a reusable Viton® O-ring. This is an ideal solution for keeping the main system under UHV conditions via a gate valve between the load lock and system.
- Kodial 304L DN100CF ViewportSKU: ZVPZ100£308.89A zero length viewport has a thickness no larger than that of its mounting flange. This makes it easier to protect from accidental damage. It provides the best angle of view as there are no tubulation walls to restrict observation. Kodial viewports are offered in CF flange styles. The viewports comprise borosilicate glass optic which is sealed to a Kovar weld ring using an induction heater process. The optic assemblies are helium leak tested and cleaned for ultra high vacuum (UHV) conditions.
- Kodial 316LN DN100CF ViewportSKU: ZVPZL1004 to 6 weeks delivery£421.59A zero length viewport has a thickness no larger than that of its mounting flange. This makes it easier to protect from accidental damage. It provides the best angle of view as there are no tubulation walls to restrict observation. Kodial viewports are offered in CF flange styles. The viewports comprise borosilicate glass optic which is sealed to a Kovar weld ring using an induction heater process. The optic assemblies are helium leak tested and cleaned for ultra high vacuum (UHV) conditions.
- Rack Drive Linear & Pinion 460mm Movement DN150CFSKU: ZLRP6044 to 6 weeks delivery£7,830.28Heavy duty high precision Rack & Pinion linear travel with optional rotation, with both axis controlled by rotatory drives. The LRP series offers linear only, where rotation is not required, or the RLRP series which offers an independent 360° rotation shaft, for transferring samples with greater accuracy then the MLD/R series. These use UHV accepted metals within its construction. The probes have a front bearing housing supporting the shaft, which offers higher accuracy over the MLRV probe for…
- Rack Drive Linear & Pinion 914mm Movement DN150CFSKU: ZLRP6094 to 6 weeks delivery£8,250.86Heavy duty high precision Rack & Pinion linear travel with optional rotation, with both axis controlled by rotatory drives. The LRP series offers linear only, where rotation is not required, or the RLRP series which offers an independent 360° rotation shaft, for transferring samples with greater accuracy then the MLD/R series. These use UHV accepted metals within its construction. The probes have a front bearing housing supporting the shaft, which offers higher accuracy over the MLRV probe for…
- Rack Drive Linear & Rotation 914mm Movement DN150CFSKU: ZRLRP6094 to 6 weeks delivery£0.00Heavy duty high precision Rack & Pinion linear travel with optional rotation, with both axis controlled by rotatory drives. The LRP series offers linear only, where rotation is not required, or the RLRP series which offers an independent 360° rotation shaft, for transferring samples with greater accuracy then the MLD/R series. These use UHV accepted metals within its construction. The probes have a front bearing housing supporting the shaft, which offers higher accuracy over the MLRV probe for…
- Rotary Platform Coarse 102.5mm Bore DN100CFSKU: ZRP100C4 to 6 weeks delivery£4,380.22Rotating platforms require minimal space at only 43mm and offer the means of translating rotation through a vessel wall without losing vacuum integrity, enabling probes such as large Cryostats to be inserted without effect on the chamber pressure. To maintain the rotary seal, two vacuum ports are mounted to the base flange of the assembly allowing connection to an appropriate independent pumps. These have a 55mm clear bore with coarse and fine control available in addition to motorised options.
- Rotary Platform Stepper Motor / Encoded 102.5mm Bore DN100CFSKU: ZRP100E4 to 6 weeks delivery£7,387.67Rotating platforms require minimal space at only 43mm and offer the means of translating rotation through a vessel wall without losing vacuum integrity, enabling probes such as large Cryostats to be inserted without effect on the chamber pressure. To maintain the rotary seal, two vacuum ports are mounted to the base flange of the assembly allowing connection to an appropriate independent pumps. These have a 55mm clear bore with coarse and fine control available in addition to motorised options.
- Rotary Platform Stepper Motor Wired 102.5mm Bore DN100CFSKU: ZRP100W4 to 6 weeks delivery£6,709.79Rotating platforms require minimal space at only 43mm and offer the means of translating rotation through a vessel wall without losing vacuum integrity, enabling probes such as large Cryostats to be inserted without effect on the chamber pressure. To maintain the rotary seal, two vacuum ports are mounted to the base flange of the assembly allowing connection to an appropriate independent pumps. These have a 55mm clear bore with coarse and fine control available in addition to motorised options.
- Rotary Platform With Drive Handle 102.5mm Bore DN100CFSKU: ZRP100H4 to 6 weeks delivery£6,548.94Rotating platforms require minimal space at only 43mm and offer the means of translating rotation through a vessel wall without losing vacuum integrity, enabling probes such as large Cryostats to be inserted without effect on the chamber pressure. To maintain the rotary seal, two vacuum ports are mounted to the base flange of the assembly allowing connection to an appropriate independent pumps. These have a 55mm clear bore with coarse and fine control available in addition to motorised options.
-
- Straight Connector Fxd DN100CFSKU: ZBS104 to 6 weeks delivery£306.64Straight Connector with one fixed flange and the other is rotatable, enabling the connection in any orientation of the vacuum equipment.
- TEE Inline 2 Rot & 1 Fixed DN100CFSKU: ZBT10RI4 to 6 weeks delivery£688.70Three way "T" with flanges equally spaced at 90° to each other. On each axis, one of the flanges is fixed and the other is rotatable. The fixed flange comes with two versions of bolt hole orientation, inline or straddled configuration, enabling the connection in any orientation of the vacuum equipment.
- TEE Straddled 2 Rot & 1 Fixed DN100CFSKU: ZBT10RS4 to 6 weeks delivery£684.92Three way "T" with flanges equally spaced at 90° to each other. On each axis, one of the flanges is fixed and the other is rotatable. The fixed flange comes with two versions of bolt hole orientation, inline or straddled configuration, enabling the connection in any orientation of the vacuum equipment.
- XYZ Z 100mm X&Y +/-12.5mm DN100CF HPT-RXSKU: HP6X1Y1010M4 to 6 weeks delivery£4,634.92Precision all metal XYZ translator with single 35mm clear bore bellows, which is bakeable to 230°C. These offer a very stable UHV platform to which our range of sample holders with cooling and heater options can be fitted. On the 152mm base flange, this offer 4 mini ports for electrical and cooling options.
- XYZ Z 100mm X&Y +/-12.5mm 4 x Mini Ports DN100CF MiniaxSKU: ZXYZ1015£3,586.62The Miniax XYZ translator offers a source of simple, cost effective, manipulation. The single bellows construction makes it easy to use in any orientation. The micrometers are vacuum conditioned and do not need to be removed for bakeout.
- XYZ Z 150mm X&Y +/-12.5mm DN100CF HPT-RXSKU: HP6X1Y1015M4 to 6 weeks delivery£4,887.94Precision all metal XYZ translator with single 35mm clear bore bellows, which is bakeable to 230°C. These offer a very stable UHV platform to which our range of sample holders with cooling and heater options can be fitted. On the 152mm base flange, this offer 4 mini ports for electrical and cooling options.
- XYZ Z 150mm X&Y +/-12.5mm DN100CF TransaxSKU: TR6X1Y1015M4 to 6 weeks delivery£9,635.40Precision all metal XYZ translator with dual 32mm clear bore bellows without support tube and 28mm with support tube, which is bakeable to 230°C. These offer an extremely stable UHV platform to which our range of sample holders with cooling and heater options can be fitted. With the support tube fitted, this greatly reduces the risk of the sample holder moving during transfer, owing to the second lower bearing support built into the X&Y table.
- XYZ Z 150mm X&Y +/-25mm DN100CF TransaxSKU: TR6X2Y2015M4 to 6 weeks delivery£10,580.82Precision all metal XYZ translator with dual 32mm clear bore bellows without support tube and 28mm with support tube, which is bakeable to 230°C. These offer an extremely stable UHV platform to which our range of sample holders with cooling and heater options can be fitted. With the support tube fitted, this greatly reduces the risk of the sample holder moving during transfer, owing to the second lower bearing support built into the X&Y table.
- XYZ Z 250mm X&Y +/-12.5mm DN100CF HPT-RXSKU: HP6X1Y1025M£5,405.28Precision all metal XYZ translator with single 35mm clear bore bellows, which is bakeable to 230°C. These offer a very stable UHV platform to which our range of sample holders with cooling and heater options can be fitted. On the 152mm base flange, this offer 4 mini ports for electrical and cooling options.
- XYZ Z 300mm X&Y +/-12.5mm DN100CF TransaxSKU: TR6X1Y1030M4 to 6 weeks delivery£10,488.32Precision all metal XYZ translator with dual 32mm clear bore bellows without support tube and 28mm with support tube, which is bakeable to 230°C. These offer an extremely stable UHV platform to which our range of sample holders with cooling and heater options can be fitted. With the support tube fitted, this greatly reduces the risk of the sample holder moving during transfer, owing to the second lower bearing support built into the X&Y table.
- XYZ Z 300mm X&Y +/-25mm DN100CF TransaxSKU: TR6X2Y2030M4 to 6 weeks delivery£11,433.74Precision all metal XYZ translator with dual 32mm clear bore bellows without support tube and 28mm with support tube, which is bakeable to 230°C. These offer an extremely stable UHV platform to which our range of sample holders with cooling and heater options can be fitted. With the support tube fitted, this greatly reduces the risk of the sample holder moving during transfer, owing to the second lower bearing support built into the X&Y table.
- XYZ Z 450mm X&Y +/-12.5mm DN100CF TransaxSKU: TR6X1Y1045M4 to 6 weeks delivery£11,126.44Precision all metal XYZ translator with dual 32mm clear bore bellows without support tube and 28mm with support tube, which is bakeable to 230°C. These offer an extremely stable UHV platform to which our range of sample holders with cooling and heater options can be fitted. With the support tube fitted, this greatly reduces the risk of the sample holder moving during transfer, owing to the second lower bearing support built into the X&Y table.
- XYZ Z 450mm X&Y +/-25mm DN100CF TransaxSKU: TR6X2Y2045M4 to 6 weeks delivery£12,071.84Precision all metal XYZ translator with dual 32mm clear bore bellows without support tube and 28mm with support tube, which is bakeable to 230°C. These offer an extremely stable UHV platform to which our range of sample holders with cooling and heater options can be fitted. With the support tube fitted, this greatly reduces the risk of the sample holder moving during transfer, owing to the second lower bearing support built into the X&Y table.
- XYZ Z 50mm X&Y +/-12.5mm DN100CF HPT-RXSKU: HP6X1Y1005M£4,550.50Precision all metal XYZ translator with single 35mm clear bore bellows, which is bakeable to 230°C. These offer a very stable UHV platform to which our range of sample holders with cooling and heater options can be fitted. On the 152mm base flange, this offer 4 mini ports for electrical and cooling options.
- XYZ Z 50mm X&Y +/-12.5mm 4 x Mini Ports DN100CF MiniaxSKU: ZXYZ05154 to 6 weeks delivery£3,320.13The Miniax XYZ translator offers a source of simple, cost effective, manipulation. The single bellows construction makes it easy to use in any orientation. The micrometers are vacuum conditioned and do not need to be removed for bakeout.