All Products
-
1 Way 100A 3Kv DN19CF FeedthroughSKU: ZEFT9114 to 6 weeks delivery£311.20Instrumentation feedthroughs are used to carry electrical signals (Including Thermocouple) which are normally low current and/or voltage. These feedthroughs are available in multi pin versions on either 34mm or 70mm OD flanges. These also come with the option of a European voltage compliant connectors -
1 Way 40A 15Kv DN19CF FeedthroughSKU: ZEFT91A£263.16Instrumentation feedthroughs are used to carry electrical signals (Including Thermocouple) which are normally low current and/or voltage. These feedthroughs are available in multi pin versions on either 34mm or 70mm OD flanges. These also come with the option of a European voltage compliant connectors -
1 Way MHV Co-Ax FeedthroughSKU: ZEFT9204 to 6 weeks delivery£196.77Instrumentation feedthroughs are used to carry electrical signals (Including Thermocouple) which are normally low current and/or voltage. These feedthroughs are available in multi pin versions on either 34mm or 70mm OD flanges. These also come with the option of a European voltage compliant connectors -
34mm OD - 304L Fixed Blank CF FlangeSKU: CF34£8.22Fixed blank Conflat flange (CF) are available in the full range of sizes. These are used to blank off unused chamber ports for leak-tight assembly, also allowing End User machining for non standard tube sizes or components. -
34mm OD - 304L Rotable Blank CF FlangeSKU: CFR344 to 6 weeks delivery£9.95Rotatable blank Conflat flange (CF) consists of two parts, the inner knife edge detail and the outer bolt hole retaining ring which rotates around the inner part. This allows the boltholes to align to mating flanges in any orientation. These are used to blank off unused chamber ports for leak-tight assembly, also allowing End User machining for non standard tube sizes or components. -
34mm OD - 304L Tapped Fixed Blank CF FlangeSKU: CF34T£12.33Fixed blank Conflat flange (CF) are available in the full range of sizes. These are used to blank off unused chamber ports for leak-tight assembly, also allowing End User machining for non standard tube sizes or components. -
34mm OD - 316LN (2D) Blank CF FlangeSKU: CFR34-LN4 to 6 weeks delivery£27.66Rotatable blank Conflat flange (CF) consists of two parts, the inner knife edge detail and the outer bolt hole retaining ring which rotates around the inner part. This allows the boltholes to align to mating flanges in any orientation. These are used to blank off unused chamber ports for leak-tight assembly, also allowing End User machining for non standard tube sizes or components. -
34mm OD - 316LN (2D) Fixed Blank CF FlangeSKU: CF34-LN£11.74Fixed blank Conflat flange (CF) are available in the full range of sizes. These are used to blank off unused chamber ports for leak-tight assembly, also allowing End User machining for non standard tube sizes or components. -
34mm OD - 316LN (2D) Tapped Fixed Blank CF FlangeSKU: CF34T-LN4 to 6 weeks delivery£16.78Fixed blank Conflat flange (CF) are available in the full range of sizes. These are used to blank off unused chamber ports for leak-tight assembly, also allowing End User machining for non standard tube sizes or components. -
34mm OD 19mm ID - 304L Fixed Bored CF FlangeSKU: CF34-19£8.61Fixed bored Conflat flange (CF) are available in the full range of sizes. The smaller range of flange can accept a number of different standard tube sizes. These are prepared ready for welding onto chamber tubulations or components. -
34mm OD 19mm ID - 304L Tapped Fixed Bored CF FlangeSKU: CF34T-19£9.39Fixed bored Conflat flange (CF) are available in the full range of sizes. The smaller range of flange can accept a number of different standard tube sizes. These are prepared ready for welding onto chamber tubulations or components. -
34mm OD 19mm ID - 316LN (2D) Fixed Bored CF FlangeSKU: CF34-19-LN£14.68Fixed bored Conflat flange (CF) are available in the full range of sizes. The smaller range of flange can accept a number of different standard tube sizes. These are prepared ready for welding onto chamber tubulations or components. -
34mm OD 19mm ID - 316LN (2D) Tapped Fixed Bored CF FlangeSKU: CF34T-19-LN£15.84Fixed bored Conflat flange (CF) are available in the full range of sizes. The smaller range of flange can accept a number of different standard tube sizes. These are prepared ready for welding onto chamber tubulations or components. -
34mm OD 6mm ID - 304L Rotable Bored CF FlangeSKU: CFR34-64 to 6 weeks delivery£9.95Rotatable bored Conflat Flange (CF) are available in the full range of sizes. The smaller range of flange can accept a number of different standard tube sizes. These are prepared ready for welding onto chamber tubulations or components. The rotatable flange consists of two parts, the inner knife edge detail and the outer bolt hole retaining ring which rotates around the inner part. -
34mm OD 6mm ID - 304L Tapped Rotable Bored CF FlangeSKU: CFR34T-64 to 6 weeks delivery£0.00Rotatable bored Conflat Flange (CF) are available in the full range of sizes. The smaller range of flange can accept a number of different standard tube sizes. These are prepared ready for welding onto chamber tubulations or components. The rotatable flange consists of two parts, the inner knife edge detail and the outer bolt hole retaining ring which rotates around the inner part. -
34mm OD 6mm ID - 316LN (2D) Rotable Bored CF FlangeSKU: CFR34-6-LN4 to 6 weeks delivery£32.72Rotatable bored Conflat Flange (CF) are available in the full range of sizes. The smaller range of flange can accept a number of different standard tube sizes. These are prepared ready for welding onto chamber tubulations or components. The rotatable flange consists of two parts, the inner knife edge detail and the outer bolt hole retaining ring which rotates around the inner part. -
4 Way 24mm Inline K Type FeedthroughSKU: ZEFT924I4 to 6 weeks delivery£663.50Instrumentation feedthroughs are used to carry electrical signals (Including Thermocouple) which are normally low current and/or voltage. These feedthroughs are available in multi pin versions on either 34mm or 70mm OD flanges. These also come with the option of a European voltage compliant connectors -
4 Way 24mm Inline N Type FeedthroughSKU: ZEFT94NI4 to 6 weeks delivery£851.40Instrumentation feedthroughs are used to carry electrical signals (Including Thermocouple) which are normally low current and/or voltage. These feedthroughs are available in multi pin versions on either 34mm or 70mm OD flanges. These also come with the option of a European voltage compliant connectors -
4 Way 24mm Inline Power + K Type FeedthroughSKU: ZEFT922I4 to 6 weeks delivery£635.98Instrumentation feedthroughs are used to carry electrical signals (Including Thermocouple) which are normally low current and/or voltage. These feedthroughs are available in multi pin versions on either 34mm or 70mm OD flanges. These also come with the option of a European voltage compliant connectors -
4 Way 24mm Inline Power + N Type FeedthroughSKU: ZEFT92NI4 to 6 weeks delivery£656.46Instrumentation feedthroughs are used to carry electrical signals (Including Thermocouple) which are normally low current and/or voltage. These feedthroughs are available in multi pin versions on either 34mm or 70mm OD flanges. These also come with the option of a European voltage compliant connectors -
4 Way 24mm Inline Power FeedthroughSKU: ZEFT9H4I£578.95Instrumentation feedthroughs are used to carry electrical signals (Including Thermocouple) which are normally low current and/or voltage. These feedthroughs are available in multi pin versions on either 34mm or 70mm OD flanges. These also come with the option of a European voltage compliant connectors -
4 Way 24mm K Type FeedthroughSKU: ZEFT924X4 to 6 weeks delivery£794.41Instrumentation feedthroughs are used to carry electrical signals (Including Thermocouple) which are normally low current and/or voltage. These feedthroughs are available in multi pin versions on either 34mm or 70mm OD flanges. These also come with the option of a European voltage compliant connectors -
4 Way 24mm N Type FeedthroughSKU: ZEFT94NX4 to 6 weeks delivery£798.55Instrumentation feedthroughs are used to carry electrical signals (Including Thermocouple) which are normally low current and/or voltage. These feedthroughs are available in multi pin versions on either 34mm or 70mm OD flanges. These also come with the option of a European voltage compliant connectors -
4 Way 24mm Power + K Type FeedthroughSKU: ZEFT922X4 to 6 weeks delivery£622.87Instrumentation feedthroughs are used to carry electrical signals (Including Thermocouple) which are normally low current and/or voltage. These feedthroughs are available in multi pin versions on either 34mm or 70mm OD flanges. These also come with the option of a European voltage compliant connectors -
4 Way 24mm Power FeedthroughSKU: ZEFT9H4X4 to 6 weeks delivery£645.91Instrumentation feedthroughs are used to carry electrical signals (Including Thermocouple) which are normally low current and/or voltage. These feedthroughs are available in multi pin versions on either 34mm or 70mm OD flanges. These also come with the option of a European voltage compliant connectors -
4 Way 25mm Power + N Type FeedthroughSKU: ZEFT92NX4 to 6 weeks delivery£664.68Instrumentation feedthroughs are used to carry electrical signals (Including Thermocouple) which are normally low current and/or voltage. These feedthroughs are available in multi pin versions on either 34mm or 70mm OD flanges. These also come with the option of a European voltage compliant connectors -
4 Way 30mm K Type FeedthroughSKU: ZEFT924W£607.58Instrumentation feedthroughs are used to carry electrical signals (Including Thermocouple) which are normally low current and/or voltage. These feedthroughs are available in multi pin versions on either 34mm or 70mm OD flanges. These also come with the option of a European voltage compliant connectors -
4 Way 30mm Power FeedthroughSKU: ZEFT9H4W4 to 6 weeks delivery£558.68Instrumentation feedthroughs are used to carry electrical signals (Including Thermocouple) which are normally low current and/or voltage. These feedthroughs are available in multi pin versions on either 34mm or 70mm OD flanges. These also come with the option of a European voltage compliant connectors -
4 Way 40mm K Type FeedthroughSKU: ZEFT924T£676.42Instrumentation feedthroughs are used to carry electrical signals (Including Thermocouple) which are normally low current and/or voltage. These feedthroughs are available in multi pin versions on either 34mm or 70mm OD flanges. These also come with the option of a European voltage compliant connectors -
4 Way 40mm N Type FeedthroughSKU: ZEFT94NT£833.78Instrumentation feedthroughs are used to carry electrical signals (Including Thermocouple) which are normally low current and/or voltage. These feedthroughs are available in multi pin versions on either 34mm or 70mm OD flanges. These also come with the option of a European voltage compliant connectors -
4 Way 40mm Power + K Type FeedthroughSKU: ZEFT922T4 to 6 weeks delivery£656.46Instrumentation feedthroughs are used to carry electrical signals (Including Thermocouple) which are normally low current and/or voltage. These feedthroughs are available in multi pin versions on either 34mm or 70mm OD flanges. These also come with the option of a European voltage compliant connectors -
4 Way 40mm Power + N Type FeedthroughSKU: ZEFT92NT4 to 6 weeks delivery£661.15Instrumentation feedthroughs are used to carry electrical signals (Including Thermocouple) which are normally low current and/or voltage. These feedthroughs are available in multi pin versions on either 34mm or 70mm OD flanges. These also come with the option of a European voltage compliant connectors -
4 Way 40mm Power FeedthroughSKU: ZEFT9H4T£645.91Instrumentation feedthroughs are used to carry electrical signals (Including Thermocouple) which are normally low current and/or voltage. These feedthroughs are available in multi pin versions on either 34mm or 70mm OD flanges. These also come with the option of a European voltage compliant connectors -
4 Way 75mm K Type FeedthroughSKU: ZEFT924£268.92Instrumentation feedthroughs are used to carry electrical signals (Including Thermocouple) which are normally low current and/or voltage. These feedthroughs are available in multi pin versions on either 34mm or 70mm OD flanges. These also come with the option of a European voltage compliant connectors -
4 Way 75mm Power + K Type FeedthroughSKU: ZEFT9224 to 6 weeks delivery£224.75Instrumentation feedthroughs are used to carry electrical signals (Including Thermocouple) which are normally low current and/or voltage. These feedthroughs are available in multi pin versions on either 34mm or 70mm OD flanges. These also come with the option of a European voltage compliant connectors -
4 Way 75mm Power + N Type FeedthroughSKU: ZEFT922N4 to 6 weeks delivery£248.28Instrumentation feedthroughs are used to carry electrical signals (Including Thermocouple) which are normally low current and/or voltage. These feedthroughs are available in multi pin versions on either 34mm or 70mm OD flanges. These also come with the option of a European voltage compliant connectors -
4 Way 75mm Power FeedthroughSKU: ZEFT940£243.09Instrumentation feedthroughs are used to carry electrical signals (Including Thermocouple) which are normally low current and/or voltage. These feedthroughs are available in multi pin versions on either 34mm or 70mm OD flanges. These also come with the option of a European voltage compliant connectors -
4 Way 80mm K Type FeedthroughSKU: ZEFT924S4 to 6 weeks delivery£630.62Instrumentation feedthroughs are used to carry electrical signals (Including Thermocouple) which are normally low current and/or voltage. These feedthroughs are available in multi pin versions on either 34mm or 70mm OD flanges. These also come with the option of a European voltage compliant connectors -
4 Way 80mm N Type FeedthroughSKU: ZEFT94NS4 to 6 weeks delivery£810.30Instrumentation feedthroughs are used to carry electrical signals (Including Thermocouple) which are normally low current and/or voltage. These feedthroughs are available in multi pin versions on either 34mm or 70mm OD flanges. These also come with the option of a European voltage compliant connectors -
4 Way 80mm Power + K Type FeedthroughSKU: ZEFT922S4 to 6 weeks delivery£663.50Instrumentation feedthroughs are used to carry electrical signals (Including Thermocouple) which are normally low current and/or voltage. These feedthroughs are available in multi pin versions on either 34mm or 70mm OD flanges. These also come with the option of a European voltage compliant connectors -
4 Way 80mm Power + N Type FeedthroughSKU: ZEFT92NS4 to 6 weeks delivery£656.46Instrumentation feedthroughs are used to carry electrical signals (Including Thermocouple) which are normally low current and/or voltage. These feedthroughs are available in multi pin versions on either 34mm or 70mm OD flanges. These also come with the option of a European voltage compliant connectors -
4 Way 80mm Power FeedthroughSKU: ZEFT9H4S£661.66Instrumentation feedthroughs are used to carry electrical signals (Including Thermocouple) which are normally low current and/or voltage. These feedthroughs are available in multi pin versions on either 34mm or 70mm OD flanges. These also come with the option of a European voltage compliant connectors -
All Metal Manual Right Angle Demountable Valve - 2 x Rotatable DN19CFSKU: ZCRD20R£748.00Right angle all metal valve, offering good conductance. The CR series comes with two body types, fully welded CR series or demountable CRD series. -
All Metal Manual Right Angle Valve - Rotatable DN19CFSKU: ZCR20R4 to 6 weeks delivery£477.51Right angle all metal valve, offering excellent conductance. The CR series comes with two body types, fully welded CR series or demountable CRD series. -
All Metal Right Angled Leak Valve Manual - 1 x Fixed 1 x Tapped DN19CFSKU: ZMD95£975.67All metal miniature leak valve with nickel sealing disc. These are used for course control flow of gas into a vacuum system from an external source and operates to 1x10-9 mbar pressure range. -
All Metal Right Angled Leak Valve Manual - 2 x Rotatable DN19CFSKU: ZLVM940R£683.86All metal Leak Valves with Mallory® sealing pad which offers a superior seal compared to a sapphire seat which can crack causing system vacuum failure. These are recommended for repeatable precise control the flow of gas and these are the preferred choice for system builders who need a reliable cost effective ultra-fine gas inlet control. -
Cross 4 Way DN19 1 Fixed (Inline) & 1 Rot Per Axis 304LSKU: ZBX419RI4 to 6 weeks delivery£156.41Four way cross with flanges equally spaced at 90° to each other. On each axis, one of the flanges is fixed and the other is rotatable. The fixed flange comes in two versions of bolt hole orientation, inline or straddled configuration, enabling the connection in any orientation of the vacuum equipment. -
Cross 4 Way DN19 1 Fixed (Straddled) & 1 Rot/Axis 304LSKU: ZBX419RS4 to 6 weeks delivery£147.44Four way cross with flanges equally spaced at 90° to each other. On each axis, one of the flanges is fixed and the other is rotatable. The fixed flange comes in two versions of bolt hole orientation, inline or straddled configuration, enabling the connection in any orientation of the vacuum equipment. -
Cross 6 Way DN19 1 Fixed (Inline) & 1 Rot/AxisSKU: ZBX619RI4 to 6 weeks delivery£0.00Six way cross with flanges equally spaced at 90° to each other. On each axis, one of the flanges is fixed and the other is rotatable. The fixed flange comes in two versions of bolt hole orientation, inline or straddled configuration, enabling the connection in any orientation of the vacuum equipment. -
Cross 6 Way DN19 1 Fixed (Straddled) & 1 Rot/AxisSKU: ZBX619RS4 to 6 weeks delivery£260.03Six way cross with flanges equally spaced at 90° to each other. On each axis, one of the flanges is fixed and the other is rotatable. The fixed flange comes in two versions of bolt hole orientation, inline or straddled configuration, enabling the connection in any orientation of the vacuum equipment. -
-
-
-
Elbow Curved 1 Fixed (Inline) 1 Rotatable DN19CFSKU: ZBE19RI4 to 6 weeks delivery£65.0990° Radius elbows, on each axis, one of the flanges is fixed and the other is rotatable. The fixed flange comes in two versions of bolt hole orientation, inline or straddled configuration, enabling the connection in any orientation of the vacuum equipment. -
Elbow Curved 1 Fixed (Straddled) 1 Rotatable DN19CFSKU: ZBE19RS£92.9590° Radius elbows, on each axis, one of the flanges is fixed and the other is rotatable. The fixed flange comes in two versions of bolt hole orientation, inline or straddled configuration, enabling the connection in any orientation of the vacuum equipment. -
Flange Tubulated Fixed DN19CFSKU: ZBFT194 to 6 weeks delivery£65.76Flange with tubulation enabling welding without risking conflat knife edge damage. Specifically designed and manufactured for vacuum system designers and manufacturers of vacuum components. -
Flange Tubulated Rotatable FC19SKU: ZBFT19R4 to 6 weeks delivery£139.80Flange with tubulation enabling welding without risking conflat knife edge damage. Specifically designed and manufactured for vacuum system designers and manufacturers of vacuum components. -
Flexible Hose Hydra Formed 1 Fix & 1 Rot DN19CF 1000mm OALSKU: ZFX19F104 to 6 weeks delivery£145.48Flexible connectors are used to compensate for any misalignment between flanges that have to be linked together. On each axis, one of the flanges is fixed and the other is rotatable, enabling the connection in any orientation of the vacuum equipment. -
Flexible Hose Hydra Formed 1 Fix & 1 Rot DN19CF 180mm OALSKU: ZFX19F4 to 6 weeks delivery£153.20Flexible connectors are used to compensate for any misalignment between flanges that have to be linked together. On each axis, one of the flanges is fixed and the other is rotatable, enabling the connection in any orientation of the vacuum equipment. -
Flexible Hose Hydra Formed 1 Fix & 1 Rot DN19CF 500mm OALSKU: ZFX19F54 to 6 weeks delivery£252.84Flexible connectors are used to compensate for any misalignment between flanges that have to be linked together. On each axis, one of the flanges is fixed and the other is rotatable, enabling the connection in any orientation of the vacuum equipment.