All Products
Since 1963 VACGEN have been supplying the Research and Scientific community with ultra-high vacuum equipment. With our long history of designing and developing core UHV components, we have been the partners of choice for leading institutes around the world. If you cannot find the product you are looking for in our catalogue components then please contact us on sales@vacgen.com and we will be happy to assist.
- 70mm OD 41mm ID - 304L Rotable Bored CF FlangeSKU: CFR70-41£0.00Rotatable bored Conflat Flange (CF) are available in the full range of sizes. The smaller range of flange can accept a number of different standard tube sizes. These are prepared ready for welding onto chamber tubulations or components. The rotatable flange consists of two parts, the inner knife edge detail and the outer bolt hole retaining ring which rotates around the inner part.
- 70mm OD 41mm ID - 304L Tapped Bored CF FlangeSKU: CFR70T-41£0.00Rotatable bored Conflat Flange (CF) are available in the full range of sizes. The smaller range of flange can accept a number of different standard tube sizes. These are prepared ready for welding onto chamber tubulations or components. The rotatable flange consists of two parts, the inner knife edge detail and the outer bolt hole retaining ring which rotates around the inner part.
- 70mm OD 41mm ID - 304L Tapped Fixed Bored CF FlangeSKU: CF70T-414 to 6 weeks delivery£17.27Fixed bored Conflat flange (CF) are available in the full range of sizes. The smaller range of flange can accept a number of different standard tube sizes. These are prepared ready for welding onto chamber tubulations or components.
- 70mm OD 41mm ID - 316LN (2D) Fixed Bored CF FlangeSKU: CF70-41-LN4 to 6 weeks deliveryFixed bored Conflat flange (CF) are available in the full range of sizes. The smaller range of flange can accept a number of different standard tube sizes. These are prepared ready for welding onto chamber tubulations or components.
- 70mm OD 41mm ID - 316LN (2D) Rotable Bored CF FlangeSKU: CFR70-41-LNRotatable bored Conflat Flange (CF) are available in the full range of sizes. The smaller range of flange can accept a number of different standard tube sizes. These are prepared ready for welding onto chamber tubulations or components. The rotatable flange consists of two parts, the inner knife edge detail and the outer bolt hole retaining ring which rotates around the inner part.
- 70mm OD 41mm ID - 316LN (2D) Tapped Fixed Bored CF FlangeSKU: CF70T-41-LN4 to 6 weeks deliveryFixed bored Conflat flange (CF) are available in the full range of sizes. The smaller range of flange can accept a number of different standard tube sizes. These are prepared ready for welding onto chamber tubulations or components.
- 70mm to 34mm OD 304L Zero Length Bored AdaptorsSKU: CFZL70-34£47.68Zero Length Adaptor conflat Flange (CF) are used to adapt from one flange size to another. The larger flange OD has through bolt holes enabling ordinary nut and bolt to be used. The smaller flange OD has metric tapped holes. This connects different sizes of flanges where there is limited space and does not increase the chamber volume.
- 70mm to 34mm OD 316LN (2D) Zero Length Bored AdaptorsSKU: CFZL70-34-LN£0.00Zero Length Adaptor conflat Flange (CF) are used to adapt from one flange size to another. The larger flange OD has through bolt holes enabling ordinary nut and bolt to be used. The smaller flange OD has metric tapped holes. This connects different sizes of flanges where there is limited space and does not increase the chamber volume.
- All Metal Body Right Angled Viton® Sealed Valve - 2 x Rotatable DN41SKU: ZVR40R£570.73The VR valves are right angled general purpose UHV valves with a cycle usage minimum of 100,000 activations. The bonnet (top) seal of the valve is welded on the VR series.
- All Metal Body Right Angled Viton® Sealed Valve - 2 x Rotatable DN64CSKU: ZVR60R4 to 6 weeks delivery£0.00The VR valves are right angled general purpose UHV valves with a cycle usage minimum of 100,000 activations. The bonnet (top) seal of the valve is welded on the VR series.
- All Metal Manual Right Angle Demountable Valve - 2 x Rotatable DN19CFSKU: ZCRD20R£1,028.50Right angle all metal valve, offering good conductance. The CR series comes with two body types, fully welded CR series or demountable CRD series.
- All Metal Manual Right Angle Valve - 2 x Rotatable DN41CFSKU: ZCR40R4 to 6 weeks delivery£707.97Right angle all metal valve, offering good conductance. The CR series comes with two body types, fully welded CR series or demountable CRD series.
- All Metal Manual Right Angle Valve - 2 x Rotatable DN41CF - 316L Body & FlangesSKU: ZCR40RL£1,702.03Right angle all metal valve, offering good conductance. The CR series comes with two body types, fully welded CR series or demountable CRD series.
- All Metal Manual Right Angle Valve - 2 x Rotatable DN64CFSKU: ZCR60R£1,307.71Right angle all metal valve, offering good conductance. The CR series comes with two body types, fully welded CR series or demountable CRD series.
- All Metal Manual Right Angle Valve - Rotatable DN19CFSKU: ZCR20R4 to 6 weeks delivery£516.43Right angle all metal valve, offering excellent conductance. The CR series comes with two body types, fully welded CR series or demountable CRD series.
- All Metal Manual Right Angle Valve Demountable - 2 x Rotatable DN41CFSKU: ZCRD40R£699.46Right angle all metal valve, offering good conductance. The CR series comes with two body types, fully welded CR series or demountable CRD series.
- All Metal Manual Right Angle Valve Demountable- 2 x Rotatable DN64CFSKU: ZCRD60R4 to 6 weeks delivery£0.00Right angle all metal valve, offering good conductance. The CR series comes with two body types, fully welded CR series or demountable CRD series.
- All Metal Right Angled Leak Valve - 2 x Rotatable DN38CFSKU: ZLVM263R4 to 6 weeks delivery£1,084.25All metal Leak Valves with Mallory® sealing pad which offers a superior seal compared to a sapphire seat which can crack causing system vacuum failure. These are recommended for repeatable precise control the flow of gas and these are the preferred choice for system builders who need a reliable cost effective ultra-fine gas inlet control.
- All Metal Right Angled Leak Valve Manual - 1 x Fixed 1 x Tapped DN19CFSKU: ZMD95£1,024.45All metal miniature leak valve with nickel sealing disc. These are used for course control flow of gas into a vacuum system from an external source and operates to 1x10-9 mbar pressure range.
- All Metal Right Angled Leak Valve Manual - 2 x Rotatable DN19CFSKU: ZLVM940R£753.95All metal Leak Valves with Mallory® sealing pad which offers a superior seal compared to a sapphire seat which can crack causing system vacuum failure. These are recommended for repeatable precise control the flow of gas and these are the preferred choice for system builders who need a reliable cost effective ultra-fine gas inlet control. For service and calibration please see product videos or visit https://vacgen.com/operating-instructions
- Barrel Connectors 1.2mm OD - 1 Barrel Set - EFT & VIGSKU: ZEFTBC4 to 6 weeks deliveryInstrumentation feedthroughs are used to carry electrical signals (Including Thermocouple) which are normally low current and/or voltage. These feedthroughs are available in multi pin versions on either 34mm or 70mm OD flanges. These also come with the option of a European voltage compliant connectors
-
-
-
-
-
-
- Blanking Panel for use with SIMBOXSKU: ZSIMBLAN4 to 6 weeks delivery£76.14Motor Controller will suit all the standard motorisation offer by VACGEN. This is a rack mounted 3U 1/3rd single axis controller with a robust long life design. This comes with a simple software package, which when purchased with a motorised component, will be a plug and play out of the box. The unit can be used in either open or closed loop (Encoder) configuration. We also offer a full range of cables and optional extras.
- Calcium Fluoride Zero Length ViewportSKU: ZVPCFAvailable Soon£0.00Calcium fluoride viewports are offered in CF flange styles. The UHV CF versions are offered using 304L stainless steel flanges.
- Configurable UHV ChambersSKU: UHVCHAMCONFIGAvailable SoonA standardised range of configurable UHV chambers have been designed for your convenience. This configurable range of products, including skeletons, tubes, flanges and gaskets will make designing your chamber a simplistic task and will ensure the costs and lead time of your chamber design are kept within your time frames and your budget. Lead times can be as low as 7 weeks with the configurable range.
- Connector Ion Gauge - VIG17/VIG18/VIG22/VIG24SKU: ZVIGSK£265.65IGC5 is an Ion gauge which combines the functionality of several vacuum system controllers into a single easy to use unit, reducing hardware, wiring and cost. The IGC5 combines the latest microprocessor technology in a 19" 1U rack mount unit, which is very stability and reliability. The IGC5 also offers Bake Out and Pirani Gauge option as standard.
- Controller Sublimation Pump 110vSKU: ZSPC8L4 to 6 weeks delivery£0.00The Titanium Sublimation Pump is a true UHV pump. It is used to supplement the pumping action of other UHV pumps, (normally Ion Pumps) as it can be more effective at pumping certain gases. The main advantages of this type of pump is, it is a simple, low cost solution, that gives you high pumping speeds.
- Controller Sublimation Pump 240vSKU: ZSPC84 to 6 weeks delivery£0.00The Titanium Sublimation Pump is a true UHV pump. It is used to supplement the pumping action of other UHV pumps, (normally Ion Pumps) as it can be more effective at pumping certain gases. The main advantages of this type of pump is, it is a simple, low cost solution, that gives you high pumping speeds.
- Crimp Connector Pins 1.2mm - 2 x 22mm OAL - Pack of 20SKU: ZEFT95CInstrumentation feedthroughs are used to carry electrical signals (Including Thermocouple) which are normally low current and/or voltage. These feedthroughs are available in multi pin versions on either 34mm or 70mm OD flanges. These also come with the option of a European voltage compliant connectors
- Cross 4 Way DN100 1 Fixed (Inline) & 1 Rot Per AxisSKU: ZBX410RI4 to 6 weeks deliveryFour way cross with flanges equally spaced at 90° to each other. On each axis, one of the flanges is fixed and the other is rotatable. The fixed flange comes in two versions of bolt hole orientation, inline or straddled configuration, enabling the connection in any orientation of the vacuum equipment.
- Cross 4 Way DN100 1 Fixed (Straddled) & 1 Rot Per AxisSKU: ZBX410RS4 to 6 weeks deliveryFour way cross with flanges equally spaced at 90° to each other. On each axis, one of the flanges is fixed and the other is rotatable. The fixed flange comes in two versions of bolt hole orientation, inline or straddled configuration, enabling the connection in any orientation of the vacuum equipment.
- Cross 4 Way DN150 1 Fixed (Inline) & 1 Rot Per AxisSKU: ZBX415RI4 to 6 weeks deliveryFour way cross with flanges equally spaced at 90° to each other. On each axis, one of the flanges is fixed and the other is rotatable. The fixed flange comes in two versions of bolt hole orientation, inline or straddled configuration, enabling the connection in any orientation of the vacuum equipment.
- Cross 4 Way DN150 1 Fixed (Straddled) & 1 Rot Per AxisSKU: ZBX415RS4 to 6 weeks deliveryFour way cross with flanges equally spaced at 90° to each other. On each axis, one of the flanges is fixed and the other is rotatable. The fixed flange comes in two versions of bolt hole orientation, inline or straddled configuration, enabling the connection in any orientation of the vacuum equipment.
- Cross 4 Way DN19 1 Fixed (Inline) & 1 Rot Per Axis 304LSKU: ZBX419RI4 to 6 weeks deliveryFour way cross with flanges equally spaced at 90° to each other. On each axis, one of the flanges is fixed and the other is rotatable. The fixed flange comes in two versions of bolt hole orientation, inline or straddled configuration, enabling the connection in any orientation of the vacuum equipment.
- Cross 4 Way DN19 1 Fixed (Straddled) & 1 Rot/Axis 304LSKU: ZBX419RS4 to 6 weeks deliveryFour way cross with flanges equally spaced at 90° to each other. On each axis, one of the flanges is fixed and the other is rotatable. The fixed flange comes in two versions of bolt hole orientation, inline or straddled configuration, enabling the connection in any orientation of the vacuum equipment.
- Cross 4 Way DN38 1 Fixed (Inline) & 1 Rot Per AxisSKU: ZBX441RI4 to 6 weeks deliveryFour way cross with flanges equally spaced at 90° to each other. On each axis, one of the flanges is fixed and the other is rotatable. The fixed flange comes in two versions of bolt hole orientation, inline or straddled configuration, enabling the connection in any orientation of the vacuum equipment.
- Cross 4 Way DN38 1 Fixed (Straddled) & 1 Rot/AxisSKU: ZBX441RS4 to 6 weeks deliveryFour way cross with flanges equally spaced at 90° to each other. On each axis, one of the flanges is fixed and the other is rotatable. The fixed flange comes in two versions of bolt hole orientation, inline or straddled configuration, enabling the connection in any orientation of the vacuum equipment.
- Cross 4 Way DN64 1 Fixed (Inline) & 1 Rot AxisSKU: ZBX464RI4 to 6 weeks deliveryFour way cross with flanges equally spaced at 90° to each other. On each axis, one of the flanges is fixed and the other is rotatable. The fixed flange comes in two versions of bolt hole orientation, inline or straddled configuration, enabling the connection in any orientation of the vacuum equipment.
- Cross 4 Way DN64 1 Fixed (Straddled) & 1 Rot AxisSKU: ZBX464RS4 to 6 weeks deliveryFour way cross with flanges equally spaced at 90° to each other. On each axis, one of the flanges is fixed and the other is rotatable. The fixed flange comes in two versions of bolt hole orientation, inline or straddled configuration, enabling the connection in any orientation of the vacuum equipment.
- Cross 6 Way DF150 1 Fixed (Inline) & 1 Rot/AxisSKU: ZBX615RI4 to 6 weeks deliverySix way cross with flanges equally spaced at 90° to each other. On each axis, one of the flanges is fixed and the other is rotatable. The fixed flange comes in two versions of bolt hole orientation, inline or straddled configuration, enabling the connection in any orientation of the vacuum equipment.
- Cross 6 Way DN100 1 Fixed (Inline) & 1 Rot/AxisSKU: ZBX610RI4 to 6 weeks deliverySix way cross with flanges equally spaced at 90° to each other. On each axis, one of the flanges is fixed and the other is rotatable. The fixed flange comes in two versions of bolt hole orientation, inline or straddled configuration, enabling the connection in any orientation of the vacuum equipment.
- Cross 6 Way DN100 1 Fixed (Straddled) & 1 Rot/AxisSKU: ZBX610RS4 to 6 weeks deliverySix way cross with flanges equally spaced at 90° to each other. On each axis, one of the flanges is fixed and the other is rotatable. The fixed flange comes in two versions of bolt hole orientation, inline or straddled configuration, enabling the connection in any orientation of the vacuum equipment.
- Cross 6 Way DN150 1 Fixed (Straddled) & 1 Rot/AxisSKU: ZBX615RS4 to 6 weeks deliverySix way cross with flanges equally spaced at 90° to each other. On each axis, one of the flanges is fixed and the other is rotatable. The fixed flange comes in two versions of bolt hole orientation, inline or straddled configuration, enabling the connection in any orientation of the vacuum equipment.
- Cross 6 Way DN19 1 Fixed (Inline) & 1 Rot/AxisSKU: ZBX619RI4 to 6 weeks deliverySix way cross with flanges equally spaced at 90° to each other. On each axis, one of the flanges is fixed and the other is rotatable. The fixed flange comes in two versions of bolt hole orientation, inline or straddled configuration, enabling the connection in any orientation of the vacuum equipment.
- Cross 6 Way DN19 1 Fixed (Straddled) & 1 Rot/AxisSKU: ZBX619RS4 to 6 weeks deliverySix way cross with flanges equally spaced at 90° to each other. On each axis, one of the flanges is fixed and the other is rotatable. The fixed flange comes in two versions of bolt hole orientation, inline or straddled configuration, enabling the connection in any orientation of the vacuum equipment.
- Cross 6 Way DN38 1 Fixed (Inline) & 1 Rot/AxisSKU: ZBX641RI4 to 6 weeks deliverySix way cross with flanges equally spaced at 90° to each other. On each axis, one of the flanges is fixed and the other is rotatable. The fixed flange comes in two versions of bolt hole orientation, inline or straddled configuration, enabling the connection in any orientation of the vacuum equipment.
- Cross 6 Way DN38 1 Fixed (Straddled) & 1 Rot/AxisSKU: ZBX641RS4 to 6 weeks deliverySix way cross with flanges equally spaced at 90° to each other. On each axis, one of the flanges is fixed and the other is rotatable. The fixed flange comes in two versions of bolt hole orientation, inline or straddled configuration, enabling the connection in any orientation of the vacuum equipment.
- Cross 6 Way DN64 1 Fixed (Inline) & 1 Rot/AxisSKU: ZBX664RI4 to 6 weeks deliverySix way cross with flanges equally spaced at 90° to each other. On each axis, one of the flanges is fixed and the other is rotatable. The fixed flange comes in two versions of bolt hole orientation, inline or straddled configuration, enabling the connection in any orientation of the vacuum equipment.
- Cross 6 Way DN64 1 Fixed (Straddled) & 1 Rot/AxisSKU: ZBX664RSSix way cross with flanges equally spaced at 90° to each other. On each axis, one of the flanges is fixed and the other is rotatable. The fixed flange comes in two versions of bolt hole orientation, inline or straddled configuration, enabling the connection in any orientation of the vacuum equipment.
-
-
-
-
-
-