Motor Controller will suit all the standard motorisation offer by VACGEN. This is a rack mounted 3U 1/3rd single axis controller with a robust long life design. This comes with a simple software package, which when purchased with a motorised component, will be a plug and play out of the box. The unit can be used in either open or closed loop (Encoder) configuration. We also offer a full range of cables and optional extras.
A standardised range of configurable UHV chambers have been designed for your convenience. This configurable range of products, including skeletons, tubes, flanges and gaskets will make designing your chamber a simplistic task and will ensure the costs and lead time of your chamber design are kept within your time frames and your budget. Lead times can be as low as 7 weeks with the configurable range.
Allows the precise mechanical alignment for sample transfer and docking systems i.e. MLRV and RLRP. Cost effective way to save time during system installation where sample transfer tools are being set up for the first time.
Allows the precise mechanical alignment for sample transfer and docking systems i.e. MLRV and RLRP. Cost effective way to save time during system installation where sample transfer tools are being set up for the first time.
Liquid feedthroughs are used to transfer fluids or gases through a Conflat flange into, or out of, a vacuum system. The LFT feedthroughs comprise of stainless steel tubes, terminating in a UHV leak tight connection on the vacuum side, using a copper gasket. The mating part of the connector is supplied, so you can weld you existing pipe work this, to make a UHV leak tight connection.
Liquid feedthroughs are used to transfer fluids or gases through a Conflat flange into, or out of, a vacuum system. The LFT feedthroughs comprise of stainless steel tubes, terminating in a UHV leak tight connection on the vacuum side, using a copper gasket. The mating part of the connector is supplied, so you can weld you existing pipe work this, to make a UHV leak tight connection.
A standardised range of UHV chambers have been manufactured for your convenience. The configurable range of skeletons come as standard in either Stainless Steel or Nickel Based Super Alloy.
The VACGEN Hemisphere Bell Chamber can be manufactured from metals such as the high permeability material Nickel-Iron Alloy or Stainless Steel 316L and is suitable for applications such as Preperation or Surface Analysis.
Super clean ultra high quality oxygen free annealed copper gaskets for lower tightening torque to make a UHV leak tight seal. These are rumbled to remove all the burrs, UHV cleaned and individually packed. Recommended for use where you are using zero length viewports and fragile ceramic feedthroughs.
Super clean ultra high quality oxygen free annealed copper gaskets for lower tightening torque to make a UHV leak tight seal. These are rumbled to remove all the burrs, UHV cleaned and individually packed. Recommended for use where you are using zero length viewports and fragile ceramic feedthroughs.
Super clean ultra high quality oxygen free annealed copper gaskets for lower tightening torque to make a UHV leak tight seal. These are rumbled to remove all the burrs, UHV cleaned and individually packed. Recommended for use where you are using zero length viewports and fragile ceramic feedthroughs.
Super clean ultra high quality oxygen free annealed copper gaskets for lower tightening torque to make a UHV leak tight seal. These are rumbled to remove all the burrs, UHV cleaned and individually packed. Recommended for use where you are using zero length viewports and fragile ceramic feedthroughs.
Super clean ultra high quality oxygen free annealed copper gaskets for lower tightening torque to make a UHV leak tight seal. These are rumbled to remove all the burrs, UHV cleaned and individually packed. Recommended for use where you are using zero length viewports and fragile ceramic feedthroughs.
Super clean ultra high quality oxygen free annealed copper gaskets for lower tightening torque to make a UHV leak tight seal. These are rumbled to remove all the burrs, UHV cleaned and individually packed. Recommended for use where you are using zero length viewports and fragile ceramic feedthroughs.
Super clean ultra high quality oxygen free annealed copper gaskets for lower tightening torque to make a UHV leak tight seal. These are rumbled to remove all the burrs, UHV cleaned and individually packed. Recommended for use where you are using zero length viewports and fragile ceramic feedthroughs.
Super clean ultra high quality oxygen free annealed copper gaskets for lower tightening torque to make a UHV leak tight seal. These are rumbled to remove all the burrs, UHV cleaned and individually packed. Recommended for use where you are using zero length viewports and fragile ceramic feedthroughs.
Super clean ultra high quality oxygen free annealed copper gaskets for lower tightening torque to make a UHV leak tight seal. These are rumbled to remove all the burrs, UHV cleaned and individually packed. Recommended for use where you are using zero length viewports and fragile ceramic feedthroughs.
Instrumentation feedthroughs are used to carry electrical signals (Including Thermocouple) which are normally low current and/or voltage. These feedthroughs are available in multi pin versions on either 34mm or 70mm OD flanges. These also come with the option of a European voltage compliant connectors
Instrumentation feedthroughs are used to carry electrical signals (Including Thermocouple) which are normally low current and/or voltage. These feedthroughs are available in multi pin versions on either 34mm or 70mm OD flanges. These also come with the option of a European voltage compliant connectors
The Titanium Sublimation Pump is a true UHV pump. It is used to supplement the pumping action of other UHV pumps, (normally Ion Pumps) as it can be more effective at pumping certain gases. The main advantages of this type of pump is, it is a simple, low cost solution, that gives you high pumping speeds.
Fixed blank Conflat flange (CF) are available in the full range of sizes. These are used to blank off unused chamber ports for leak-tight assembly, also allowing End User machining for non standard tube sizes or components.
Motor Controller will suit all the standard motorisation offer by VACGEN. This is a rack mounted 3U 1/3rd single axis controller with a robust long life design. This comes with a simple software package, which when purchased with a motorised component, will be a plug and play out of the box. The unit can be used in either open or closed loop (Encoder) configuration. We also offer a full range of cables and optional extras.
Motor Controller will suit all the standard motorisation offer by VACGEN. This is a rack mounted 3U 1/3rd single axis controller with a robust long life design. This comes with a simple software package, which when purchased with a motorised component, will be a plug and play out of the box. The unit can be used in either open or closed loop (Encoder) configuration. We also offer a full range of cables and optional extras.
Motor Controller will suit all the standard motorisation offer by VACGEN. This is a rack mounted 3U 1/3rd single axis controller with a robust long life design. This comes with a simple software package, which when purchased with a motorised component, will be a plug and play out of the box. The unit can be used in either open or closed loop (Encoder) configuration. We also offer a full range of cables and optional extras.
Motor Controller will suit all the standard motorisation offer by VACGEN. This is a rack mounted 3U 1/3rd single axis controller with a robust long life design. This comes with a simple software package, which when purchased with a motorised component, will be a plug and play out of the box. The unit can be used in either open or closed loop (Encoder) configuration. We also offer a full range of cables and optional extras.
Motor Controller will suit all the standard motorisation offer by VACGEN. This is a rack mounted 3U 1/3rd single axis controller with a robust long life design. This comes with a simple software package, which when purchased with a motorised component, will be a plug and play out of the box. The unit can be used in either open or closed loop (Encoder) configuration. We also offer a full range of cables and optional extras.
Motor Controller will suit all the standard motorisation offer by VACGEN. This is a rack mounted 3U 1/3rd single axis controller with a robust long life design. This comes with a simple software package, which when purchased with a motorised component, will be a plug and play out of the box. The unit can be used in either open or closed loop (Encoder) configuration. We also offer a full range of cables and optional extras.
Motor Controller will suit all the standard motorisation offer by VACGEN. This is a rack mounted 3U 1/3rd single axis controller with a robust long life design. This comes with a simple software package, which when purchased with a motorised component, will be a plug and play out of the box. The unit can be used in either open or closed loop (Encoder) configuration. We also offer a full range of cables and optional extras.
Motor Controller will suit all the standard motorisation offer by VACGEN. This is a rack mounted 3U 1/3rd single axis controller with a robust long life design. This comes with a simple software package, which when purchased with a motorised component, will be a plug and play out of the box. The unit can be used in either open or closed loop (Encoder) configuration. We also offer a full range of cables and optional extras.
Motor Controller will suit all the standard motorisation offer by VACGEN. This is a rack mounted 3U 1/3rd single axis controller with a robust long life design. This comes with a simple software package, which when purchased with a motorised component, will be a plug and play out of the box. The unit can be used in either open or closed loop (Encoder) configuration. We also offer a full range of cables and optional extras.
Motor Controller will suit all the standard motorisation offer by VACGEN. This is a rack mounted 3U 1/3rd single axis controller with a robust long life design. This comes with a simple software package, which when purchased with a motorised component, will be a plug and play out of the box. The unit can be used in either open or closed loop (Encoder) configuration. We also offer a full range of cables and optional extras.
Motor Controller will suit all the standard motorisation offer by VACGEN. This is a rack mounted 3U 1/3rd single axis controller with a robust long life design. This comes with a simple software package, which when purchased with a motorised component, will be a plug and play out of the box. The unit can be used in either open or closed loop (Encoder) configuration. We also offer a full range of cables and optional extras.
Motor Controller will suit all the standard motorisation offer by VACGEN. This is a rack mounted 3U 1/3rd single axis controller with a robust long life design. This comes with a simple software package, which when purchased with a motorised component, will be a plug and play out of the box. The unit can be used in either open or closed loop (Encoder) configuration. We also offer a full range of cables and optional extras.
Motor Controller will suit all the standard motorisation offer by VACGEN. This is a rack mounted 3U 1/3rd single axis controller with a robust long life design. This comes with a simple software package, which when purchased with a motorised component, will be a plug and play out of the box. The unit can be used in either open or closed loop (Encoder) configuration. We also offer a full range of cables and optional extras.
Motor Controller will suit all the standard motorisation offer by VACGEN. This is a rack mounted 3U 1/3rd single axis controller with a robust long life design. This comes with a simple software package, which when purchased with a motorised component, will be a plug and play out of the box. The unit can be used in either open or closed loop (Encoder) configuration. We also offer a full range of cables and optional extras.
Motor Controller will suit all the standard motorisation offer by VACGEN. This is a rack mounted 3U 1/3rd single axis controller with a robust long life design. This comes with a simple software package, which when purchased with a motorised component, will be a plug and play out of the box. The unit can be used in either open or closed loop (Encoder) configuration. We also offer a full range of cables and optional extras.
Motor Controller will suit all the standard motorisation offer by VACGEN. This is a rack mounted 3U 1/3rd single axis controller with a robust long life design. This comes with a simple software package, which when purchased with a motorised component, will be a plug and play out of the box. The unit can be used in either open or closed loop (Encoder) configuration. We also offer a full range of cables and optional extras.
Motor Controller will suit all the standard motorisation offer by VACGEN. This is a rack mounted 3U 1/3rd single axis controller with a robust long life design. This comes with a simple software package, which when purchased with a motorised component, will be a plug and play out of the box. The unit can be used in either open or closed loop (Encoder) configuration. We also offer a full range of cables and optional extras.
Motor Controller will suit all the standard motorisation offer by VACGEN. This is a rack mounted 3U 1/3rd single axis controller with a robust long life design. This comes with a simple software package, which when purchased with a motorised component, will be a plug and play out of the box. The unit can be used in either open or closed loop (Encoder) configuration. We also offer a full range of cables and optional extras.
Motor Controller will suit all the standard motorisation offer by VACGEN. This is a rack mounted 3U 1/3rd single axis controller with a robust long life design. This comes with a simple software package, which when purchased with a motorised component, will be a plug and play out of the box. The unit can be used in either open or closed loop (Encoder) configuration. We also offer a full range of cables and optional extras.
Motor Controller will suit all the standard motorisation offer by VACGEN. This is a rack mounted 3U 1/3rd single axis controller with a robust long life design. This comes with a simple software package, which when purchased with a motorised component, will be a plug and play out of the box. The unit can be used in either open or closed loop (Encoder) configuration. We also offer a full range of cables and optional extras.
Motor Controller will suit all the standard motorisation offer by VACGEN. This is a rack mounted 3U 1/3rd single axis controller with a robust long life design. This comes with a simple software package, which when purchased with a motorised component, will be a plug and play out of the box. The unit can be used in either open or closed loop (Encoder) configuration. We also offer a full range of cables and optional extras.
Motor Controller will suit all the standard motorisation offer by VACGEN. This is a rack mounted 3U 1/3rd single axis controller with a robust long life design. This comes with a simple software package, which when purchased with a motorised component, will be a plug and play out of the box. The unit can be used in either open or closed loop (Encoder) configuration. We also offer a full range of cables and optional extras.
Motor Controller will suit all the standard motorisation offer by VACGEN. This is a rack mounted 3U 1/3rd single axis controller with a robust long life design. This comes with a simple software package, which when purchased with a motorised component, will be a plug and play out of the box. The unit can be used in either open or closed loop (Encoder) configuration. We also offer a full range of cables and optional extras.
Rotatable bored Conflat Flange (CF) are available in the full range of sizes. The smaller range of flange can accept a number of different standard tube sizes. These are prepared ready for welding onto chamber tubulations or components. The rotatable flange consists of two parts, the inner knife edge detail and the outer bolt hole retaining ring which rotates around the inner part.
Fixed blank Conflat flange (CF) are available in the full range of sizes. These are used to blank off unused chamber ports for leak-tight assembly, also allowing End User machining for non standard tube sizes or components.
Fixed blank Conflat flange (CF) are available in the full range of sizes. These are used to blank off unused chamber ports for leak-tight assembly, also allowing End User machining for non standard tube sizes or components.
Fixed blank Conflat flange (CF) are available in the full range of sizes. These are used to blank off unused chamber ports for leak-tight assembly, also allowing End User machining for non standard tube sizes or components.
Fixed blank Conflat flange (CF) are available in the full range of sizes. These are used to blank off unused chamber ports for leak-tight assembly, also allowing End User machining for non standard tube sizes or components.
Fixed blank Conflat flange (CF) are available in the full range of sizes. These are used to blank off unused chamber ports for leak-tight assembly, also allowing End User machining for non standard tube sizes or components.
Fixed blank Conflat flange (CF) are available in the full range of sizes. These are used to blank off unused chamber ports for leak-tight assembly, also allowing End User machining for non standard tube sizes or components.
Fixed blank Conflat flange (CF) are available in the full range of sizes. These are used to blank off unused chamber ports for leak-tight assembly, also allowing End User machining for non standard tube sizes or components.
Fixed blank Conflat flange (CF) are available in the full range of sizes. These are used to blank off unused chamber ports for leak-tight assembly, also allowing End User machining for non standard tube sizes or components.
Fixed blank Conflat flange (CF) are available in the full range of sizes. These are used to blank off unused chamber ports for leak-tight assembly, also allowing End User machining for non standard tube sizes or components.
Fixed blank Conflat flange (CF) are available in the full range of sizes. These are used to blank off unused chamber ports for leak-tight assembly, also allowing End User machining for non standard tube sizes or components.
Fixed blank Conflat flange (CF) are available in the full range of sizes. These are used to blank off unused chamber ports for leak-tight assembly, also allowing End User machining for non standard tube sizes or components.
Fixed blank Conflat flange (CF) are available in the full range of sizes. These are used to blank off unused chamber ports for leak-tight assembly, also allowing End User machining for non standard tube sizes or components.
