Resistive heating controller, 19" 3U rack mounted unit with options of "K" or "N" Type thermocouple. This form of heating offers temperatures upto 1000°C and monitoring down to 77K. Designed to work with our PBN and wire range of heaters, with the option of RS232 or RS485 for monitoring.
Resistive heating controller, 19" 3U rack mounted unit with options of "K" or "N" Type thermocouple. This form of heating offers temperatures upto 1000°C and monitoring down to 77K. Designed to work with our PBN and wire range of heaters, with the option of RS232 or RS485 for monitoring.
Resistive heating controller, 19" 3U rack mounted unit with options of "K" or "N" Type thermocouple. This form of heating offers temperatures upto 1000°C and monitoring down to 77K. Designed to work with our PBN and wire range of heaters, with the option of RS232 or RS485 for monitoring.
Resistive heating controller, 19" 3U rack mounted unit with options of "K" or "N" Type thermocouple. This form of heating offers temperatures upto 1000°C and monitoring down to 77K. Designed to work with our PBN and wire range of heaters, with the option of RS232 or RS485 for monitoring.
Resistive heating controller, 19" 3U rack mounted unit with options of "K" or "N" Type thermocouple. This form of heating offers temperatures upto 1000°C and monitoring down to 77K. Designed to work with our PBN and wire range of heaters, with the option of RS232 or RS485 for monitoring.
Resistive heating controller, 19" 3U rack mounted unit with options of "K" or "N" Type thermocouple. This form of heating offers temperatures upto 1000°C and monitoring down to 77K. Designed to work with our PBN and wire range of heaters, with the option of RS232 or RS485 for monitoring.
Resistive heating controller, 19" 3U rack mounted unit with options of "K" or "N" Type thermocouple. This form of heating offers temperatures upto 1000°C and monitoring down to 77K. Designed to work with our PBN and wire range of heaters, with the option of RS232 or RS485 for monitoring.
Resistive heating controller, 19" 3U rack mounted unit with options of "K" or "N" Type thermocouple. This form of heating offers temperatures upto 1000°C and monitoring down to 77K. Designed to work with our PBN and wire range of heaters, with the option of RS232 or RS485 for monitoring.
Resistive heating controller, 19" 3U rack mounted unit with options of "K" or "N" Type thermocouple. This form of heating offers temperatures upto 1000°C and monitoring down to 77K. Designed to work with our PBN and wire range of heaters, with the option of RS232 or RS485 for monitoring.
Resistive heating controller, 19" 3U rack mounted unit with options of "K" or "N" Type thermocouple. This form of heating offers temperatures upto 1000°C and monitoring down to 77K. Designed to work with our PBN and wire range of heaters, with the option of RS232 or RS485 for monitoring.
Resistive heating controller, 19" 3U rack mounted unit with options of "K" or "N" Type thermocouple. This form of heating offers temperatures upto 1000°C and monitoring down to 77K. Designed to work with our PBN and wire range of heaters, with the option of RS232 or RS485 for monitoring.
Resistive heating controller, 19" 3U rack mounted unit with options of "K" or "N" Type thermocouple. This form of heating offers temperatures upto 1000°C and monitoring down to 77K. Designed to work with our PBN and wire range of heaters, with the option of RS232 or RS485 for monitoring.
Flexible connectors are used to compensate for any misalignment between flanges that have to be linked together. On each axis, one of the flanges is fixed and the other is rotatable, enabling the connection in any orientation of the vacuum equipment.
Flexible connectors are used to compensate for any misalignment between flanges that have to be linked together. On each axis, one of the flanges is fixed and the other is rotatable, enabling the connection in any orientation of the vacuum equipment.
Flexible connectors are used to compensate for any misalignment between flanges that have to be linked together. On each axis, one of the flanges is fixed and the other is rotatable, enabling the connection in any orientation of the vacuum equipment.
Viewport shutters are used to protect the internal surface of a viewport from build-up of deposition material ejected during thin film processing of substrates. The shutter design is built to allow the widest possible viewing angle, and the maximum level of protection of the viewing area.
A standardised range of configurable UHV chambers have been designed for your convenience. This configurable range of products, including skeletons, tubes, flanges and gaskets will make designing your chamber a simplistic task and will ensure the costs and lead time of your chamber design are kept within your time frames and your budget. Lead times can be as low as 7 weeks with the configurable range.
The VACGEN Hemisphere Bell Chamber can be manufactured from metals such as the high permeability material Mu-Metal or Stainless Steel 316L and is suitable for applications such as Preperation or Surface Analysis.
A standardised range of UHV chambers have been manufactured for your convenience. The configurable range of skeletons come as standard in either Stainless Steel or Nickel Based Super Alloy i.e Mu-Metal.
The VR valves are right angled general purpose UHV valves with a cycle usage minimum of 100,000 activations. The bonnet (top) seal of the valve is welded on the VR series.
Instrumentation feedthroughs are used to carry electrical signals (Including Thermocouple) which are normally low current and/or voltage. These feedthroughs are available in multi pin versions on either 34mm or 70mm OD flanges. These also come with the option of a European voltage compliant connectors
Instrumentation feedthroughs are used to carry electrical signals (Including Thermocouple) which are normally low current and/or voltage. These feedthroughs are available in multi pin versions on either 34mm or 70mm OD flanges. These also come with the option of a European voltage compliant connectors
The RD91 is a manual or motorised precision rotary drive, with a 100mm shaft length. The RD91 is fitted with Index scale and position lock. The drive provides a low backlash, with a smooth continuous primary rotation via a 6.35mm diameter shaft.
The VR valves are right angled general purpose UHV valves with a cycle usage minimum of 100,000 activations. The bonnet (top) seal of the valve is welded on the VR series.
The RD91 is a manual or motorised precision rotary drive, with a 100mm shaft length. The RD91 is fitted with Index scale and position lock. The drive provides a low backlash, with a smooth continuous primary rotation via a 6.35mm diameter shaft.
Instrumentation feedthroughs are used to carry electrical signals (Including Thermocouple) which are normally low current and/or voltage. These feedthroughs are available in multi pin versions on either 34mm or 70mm OD flanges. These also come with the option of a European voltage compliant connectors
All metal Leak Valves with Mallory® sealing pad which offers a superior seal compared to a sapphire seat which can crack causing system vacuum failure. These are recommended for repeatable precise control the flow of gas and these are the preferred choice for system builders who need a reliable cost effective ultra-fine gas inlet control. For service and calibration please see product videos or visit https://vacgen.com/operating-instructions
The RD91 is a manual or motorised precision rotary drive, with a 100mm shaft length. The RD91 is fitted with Index scale and position lock. The drive provides a low backlash, with a smooth continuous primary rotation via a 6.35mm diameter shaft.
The RD6 is a manual or motorised precision rotary drive with a 100mm shaft length. The RD6 has low backlash, with a smooth continuous primary rotation via a 9.5 mm diameter shaft.
All metal Leak Valves with Mallory® sealing pad which offers a superior seal compared to a sapphire seat which can crack causing system vacuum failure. These are recommended for repeatable precise control the flow of gas and these are the preferred choice for system builders who need a reliable cost effective ultra-fine gas inlet control.
All metal miniature leak valve with nickel sealing disc. These are used for course control flow of gas into a vacuum system from an external source and operates to 1x10-9 mbar pressure range.
