Fixed bored Conflat flange (CF) are available in the full range of sizes. The smaller range of flange can accept a number of different standard tube sizes. These are prepared ready for welding onto chamber tubulations or components.
Fixed bored Conflat flange (CF) are available in the full range of sizes. The smaller range of flange can accept a number of different standard tube sizes. These are prepared ready for welding onto chamber tubulations or components.
Fixed bored Conflat flange (CF) are available in the full range of sizes. The smaller range of flange can accept a number of different standard tube sizes. These are prepared ready for welding onto chamber tubulations or components.
Fixed bored Conflat flange (CF) are available in the full range of sizes. The smaller range of flange can accept a number of different standard tube sizes. These are prepared ready for welding onto chamber tubulations or components.
Fixed bored Conflat flange (CF) are available in the full range of sizes. The smaller range of flange can accept a number of different standard tube sizes. These are prepared ready for welding onto chamber tubulations or components.
Fixed bored Conflat flange (CF) are available in the full range of sizes. The smaller range of flange can accept a number of different standard tube sizes. These are prepared ready for welding onto chamber tubulations or components.
Fixed bored Conflat flange (CF) are available in the full range of sizes. The smaller range of flange can accept a number of different standard tube sizes. These are prepared ready for welding onto chamber tubulations or components.
Fixed bored Conflat flange (CF) are available in the full range of sizes. The smaller range of flange can accept a number of different standard tube sizes. These are prepared ready for welding onto chamber tubulations or components.
Fixed bored Conflat flange (CF) are available in the full range of sizes. The smaller range of flange can accept a number of different standard tube sizes. These are prepared ready for welding onto chamber tubulations or components.
Fixed bored Conflat flange (CF) are available in the full range of sizes. The smaller range of flange can accept a number of different standard tube sizes. These are prepared ready for welding onto chamber tubulations or components.
Fixed bored Conflat flange (CF) are available in the full range of sizes. The smaller range of flange can accept a number of different standard tube sizes. These are prepared ready for welding onto chamber tubulations or components.
Fixed bored Conflat flange (CF) are available in the full range of sizes. The smaller range of flange can accept a number of different standard tube sizes. These are prepared ready for welding onto chamber tubulations or components.
Fixed bored Conflat flange (CF) are available in the full range of sizes. The smaller range of flange can accept a number of different standard tube sizes. These are prepared ready for welding onto chamber tubulations or components.
Fixed bored Conflat flange (CF) are available in the full range of sizes. The smaller range of flange can accept a number of different standard tube sizes. These are prepared ready for welding onto chamber tubulations or components.
Fixed bored Conflat flange (CF) are available in the full range of sizes. The smaller range of flange can accept a number of different standard tube sizes. These are prepared ready for welding onto chamber tubulations or components.
Fixed bored Conflat flange (CF) are available in the full range of sizes. The smaller range of flange can accept a number of different standard tube sizes. These are prepared ready for welding onto chamber tubulations or components.
Fixed bored Conflat flange (CF) are available in the full range of sizes. The smaller range of flange can accept a number of different standard tube sizes. These are prepared ready for welding onto chamber tubulations or components.
Fixed bored Conflat flange (CF) are available in the full range of sizes. The smaller range of flange can accept a number of different standard tube sizes. These are prepared ready for welding onto chamber tubulations or components.
Rotatable bored Conflat Flange (CF) are available in the full range of sizes. The smaller range of flange can accept a number of different standard tube sizes. These are prepared ready for welding onto chamber tubulations or components. The rotatable flange consists of two parts, the inner knife edge detail and the outer bolt hole retaining ring which rotates around the inner part.
Rotatable bored Conflat Flange (CF) are available in the full range of sizes. The smaller range of flange can accept a number of different standard tube sizes. These are prepared ready for welding onto chamber tubulations or components. The rotatable flange consists of two parts, the inner knife edge detail and the outer bolt hole retaining ring which rotates around the inner part.
Rotatable bored Conflat Flange (CF) are available in the full range of sizes. The smaller range of flange can accept a number of different standard tube sizes. These are prepared ready for welding onto chamber tubulations or components. The rotatable flange consists of two parts, the inner knife edge detail and the outer bolt hole retaining ring which rotates around the inner part.
Rotatable bored Conflat Flange (CF) are available in the full range of sizes. The smaller range of flange can accept a number of different standard tube sizes. These are prepared ready for welding onto chamber tubulations or components. The rotatable flange consists of two parts, the inner knife edge detail and the outer bolt hole retaining ring which rotates around the inner part.
Rotatable bored Conflat Flange (CF) are available in the full range of sizes. The smaller range of flange can accept a number of different standard tube sizes. These are prepared ready for welding onto chamber tubulations or components. The rotatable flange consists of two parts, the inner knife edge detail and the outer bolt hole retaining ring which rotates around the inner part.
Rotatable bored Conflat Flange (CF) are available in the full range of sizes. The smaller range of flange can accept a number of different standard tube sizes. These are prepared ready for welding onto chamber tubulations or components. The rotatable flange consists of two parts, the inner knife edge detail and the outer bolt hole retaining ring which rotates around the inner part.
Rotatable bored Conflat Flange (CF) are available in the full range of sizes. The smaller range of flange can accept a number of different standard tube sizes. These are prepared ready for welding onto chamber tubulations or components. The rotatable flange consists of two parts, the inner knife edge detail and the outer bolt hole retaining ring which rotates around the inner part.
Rotatable bored Conflat Flange (CF) are available in the full range of sizes. The smaller range of flange can accept a number of different standard tube sizes. These are prepared ready for welding onto chamber tubulations or components. The rotatable flange consists of two parts, the inner knife edge detail and the outer bolt hole retaining ring which rotates around the inner part.
Rotatable bored Conflat Flange (CF) are available in the full range of sizes. The smaller range of flange can accept a number of different standard tube sizes. These are prepared ready for welding onto chamber tubulations or components. The rotatable flange consists of two parts, the inner knife edge detail and the outer bolt hole retaining ring which rotates around the inner part.
Rotatable bored Conflat Flange (CF) are available in the full range of sizes. The smaller range of flange can accept a number of different standard tube sizes. These are prepared ready for welding onto chamber tubulations or components. The rotatable flange consists of two parts, the inner knife edge detail and the outer bolt hole retaining ring which rotates around the inner part.
Rotatable bored Conflat Flange (CF) are available in the full range of sizes. The smaller range of flange can accept a number of different standard tube sizes. These are prepared ready for welding onto chamber tubulations or components. The rotatable flange consists of two parts, the inner knife edge detail and the outer bolt hole retaining ring which rotates around the inner part.
Rotatable bored Conflat Flange (CF) are available in the full range of sizes. The smaller range of flange can accept a number of different standard tube sizes. These are prepared ready for welding onto chamber tubulations or components. The rotatable flange consists of two parts, the inner knife edge detail and the outer bolt hole retaining ring which rotates around the inner part.
Rotatable bored Conflat Flange (CF) are available in the full range of sizes. The smaller range of flange can accept a number of different standard tube sizes. These are prepared ready for welding onto chamber tubulations or components. The rotatable flange consists of two parts, the inner knife edge detail and the outer bolt hole retaining ring which rotates around the inner part.
Rotatable bored Conflat Flange (CF) are available in the full range of sizes. The smaller range of flange can accept a number of different standard tube sizes. These are prepared ready for welding onto chamber tubulations or components. The rotatable flange consists of two parts, the inner knife edge detail and the outer bolt hole retaining ring which rotates around the inner part.
Rotatable bored Conflat Flange (CF) are available in the full range of sizes. The smaller range of flange can accept a number of different standard tube sizes. These are prepared ready for welding onto chamber tubulations or components. The rotatable flange consists of two parts, the inner knife edge detail and the outer bolt hole retaining ring which rotates around the inner part.
Fixed blank Conflat flange (CF) are available in the full range of sizes. These are used to blank off unused chamber ports for leak-tight assembly, also allowing End User machining for non standard tube sizes or components.
Viewport shutters are used to protect the internal surface of a viewport from build-up of deposition material ejected during thin film processing of substrates. The shutter design is built to allow the widest possible viewing angle, and the maximum level of protection of the viewing area.
Rotatable bored Conflat Flange (CF) are available in the full range of sizes. The smaller range of flange can accept a number of different standard tube sizes. These are prepared ready for welding onto chamber tubulations or components. The rotatable flange consists of two parts, the inner knife edge detail and the outer bolt hole retaining ring which rotates around the inner part.
Single edge welded bellows wobble stick allows limited coarse linear and angular movement. A cost efficient manually operated stick, translating linear hand movement into the vacuum envelope with 15 of angular movement.
Motor Controller will suit all the standard motorisation offer by VACGEN. This is a rack mounted 3U 1/3rd single axis controller with a robust long life design. This comes with a simple software package, which when purchased with a motorised component, will be a plug and play out of the box. The unit can be used in either open or closed loop (Encoder) configuration. We also offer a full range of cables and optional extras.
Motor Controller will suit all the standard motorisation offer by VACGEN. This is a rack mounted 3U 1/3rd single axis controller with a robust long life design. This comes with a simple software package, which when purchased with a motorised component, will be a plug and play out of the box. The unit can be used in either open or closed loop (Encoder) configuration. We also offer a full range of cables and optional extras.
Motor Controller will suit all the standard motorisation offer by VACGEN. This is a rack mounted 3U 1/3rd single axis controller with a robust long life design. This comes with a simple software package, which when purchased with a motorised component, will be a plug and play out of the box. The unit can be used in either open or closed loop (Encoder) configuration. We also offer a full range of cables and optional extras.
Motor Controller will suit all the standard motorisation offer by VACGEN. This is a rack mounted 3U 1/3rd single axis controller with a robust long life design. This comes with a simple software package, which when purchased with a motorised component, will be a plug and play out of the box. The unit can be used in either open or closed loop (Encoder) configuration. We also offer a full range of cables and optional extras.
Motor Controller will suit all the standard motorisation offer by VACGEN. This is a rack mounted 3U 1/3rd single axis controller with a robust long life design. This comes with a simple software package, which when purchased with a motorised component, will be a plug and play out of the box. The unit can be used in either open or closed loop (Encoder) configuration. We also offer a full range of cables and optional extras.
Motor Controller will suit all the standard motorisation offer by VACGEN. This is a rack mounted 3U 1/3rd single axis controller with a robust long life design. This comes with a simple software package, which when purchased with a motorised component, will be a plug and play out of the box. The unit can be used in either open or closed loop (Encoder) configuration. We also offer a full range of cables and optional extras.
Motor Controller will suit all the standard motorisation offer by VACGEN. This is a rack mounted 3U 1/3rd single axis controller with a robust long life design. This comes with a simple software package, which when purchased with a motorised component, will be a plug and play out of the box. The unit can be used in either open or closed loop (Encoder) configuration. We also offer a full range of cables and optional extras.
Motor Controller will suit all the standard motorisation offer by VACGEN. This is a rack mounted 3U 1/3rd single axis controller with a robust long life design. This comes with a simple software package, which when purchased with a motorised component, will be a plug and play out of the box. The unit can be used in either open or closed loop (Encoder) configuration. We also offer a full range of cables and optional extras.
Motor Controller will suit all the standard motorisation offer by VACGEN. This is a rack mounted 3U 1/3rd single axis controller with a robust long life design. This comes with a simple software package, which when purchased with a motorised component, will be a plug and play out of the box. The unit can be used in either open or closed loop (Encoder) configuration. We also offer a full range of cables and optional extras.
Motor Controller will suit all the standard motorisation offer by VACGEN. This is a rack mounted 3U 1/3rd single axis controller with a robust long life design. This comes with a simple software package, which when purchased with a motorised component, will be a plug and play out of the box. The unit can be used in either open or closed loop (Encoder) configuration. We also offer a full range of cables and optional extras.
Motor Controller will suit all the standard motorisation offer by VACGEN. This is a rack mounted 3U 1/3rd single axis controller with a robust long life design. This comes with a simple software package, which when purchased with a motorised component, will be a plug and play out of the box. The unit can be used in either open or closed loop (Encoder) configuration. We also offer a full range of cables and optional extras.
Motor Controller will suit all the standard motorisation offer by VACGEN. This is a rack mounted 3U 1/3rd single axis controller with a robust long life design. This comes with a simple software package, which when purchased with a motorised component, will be a plug and play out of the box. The unit can be used in either open or closed loop (Encoder) configuration. We also offer a full range of cables and optional extras.
Motor Controller will suit all the standard motorisation offer by VACGEN. This is a rack mounted 3U 1/3rd single axis controller with a robust long life design. This comes with a simple software package, which when purchased with a motorised component, will be a plug and play out of the box. The unit can be used in either open or closed loop (Encoder) configuration. We also offer a full range of cables and optional extras.
Motor Controller will suit all the standard motorisation offer by VACGEN. This is a rack mounted 3U 1/3rd single axis controller with a robust long life design. This comes with a simple software package, which when purchased with a motorised component, will be a plug and play out of the box. The unit can be used in either open or closed loop (Encoder) configuration. We also offer a full range of cables and optional extras.
Motor Controller will suit all the standard motorisation offer by VACGEN. This is a rack mounted 3U 1/3rd single axis controller with a robust long life design. This comes with a simple software package, which when purchased with a motorised component, will be a plug and play out of the box. The unit can be used in either open or closed loop (Encoder) configuration. We also offer a full range of cables and optional extras.
Motor Controller will suit all the standard motorisation offer by VACGEN. This is a rack mounted 3U 1/3rd single axis controller with a robust long life design. This comes with a simple software package, which when purchased with a motorised component, will be a plug and play out of the box. The unit can be used in either open or closed loop (Encoder) configuration. We also offer a full range of cables and optional extras.
Motor Controller will suit all the standard motorisation offer by VACGEN. This is a rack mounted 3U 1/3rd single axis controller with a robust long life design. This comes with a simple software package, which when purchased with a motorised component, will be a plug and play out of the box. The unit can be used in either open or closed loop (Encoder) configuration. We also offer a full range of cables and optional extras.
Motor Controller will suit all the standard motorisation offer by VACGEN. This is a rack mounted 3U 1/3rd single axis controller with a robust long life design. This comes with a simple software package, which when purchased with a motorised component, will be a plug and play out of the box. The unit can be used in either open or closed loop (Encoder) configuration. We also offer a full range of cables and optional extras.
Motor Controller will suit all the standard motorisation offer by VACGEN. This is a rack mounted 3U 1/3rd single axis controller with a robust long life design. This comes with a simple software package, which when purchased with a motorised component, will be a plug and play out of the box. The unit can be used in either open or closed loop (Encoder) configuration. We also offer a full range of cables and optional extras.
Precision all metal XYZ translator with single 35mm clear bore bellows, which is bakeable to 230°C. These offer a very stable UHV platform to which our range of sample holders with cooling and heater options can be fitted. On the 152mm base flange, this offer 4 mini ports for electrical and cooling options.
Precision all metal XYZ translator with single 35mm clear bore bellows, which is bakeable to 230°C. These offer a very stable UHV platform to which our range of sample holders with cooling and heater options can be fitted. On the 152mm base flange, this offer 4 mini ports for electrical and cooling options.
Precision all metal XYZ translator with single 35mm clear bore bellows, which is bakeable to 230°C. These offer a very stable UHV platform to which our range of sample holders with cooling and heater options can be fitted. On the 152mm base flange, this offer 4 mini ports for electrical and cooling options.
Precision all metal XYZ translator with single 35mm clear bore bellows, which is bakeable to 230°C. These offer a very stable UHV platform to which our range of sample holders with cooling and heater options can be fitted. On the 152mm base flange, this offer 4 mini ports for electrical and cooling options.
