4 Way 40A 15Kv DN38CF Feedthrough
Email: sales@vacgen.com
- Accept payments online
- Minimum Order £100
- Calculate shipping cost
- Extensive support
During bakeout we recommend that you do not cover the external surface of the feedthrough with foil as the aluminium can rub off onto the ceramic and cause an electrical short. It is important not to exceed the feedthrough temperature and power ratings as this can damage the feedthrough, or cause vacuum leaks.
| Power Feedthroughs | ||||||||||
| DN Number | Flange mm | Max Current Per Pin | Max Voltage kV | No. and OD of Conductors mm | Conductor Material | Internal | External | Bakeout Temp C (Connector removed) | Shipping wieght (kg) | Order Code |
| DN16 | 34 | 40A | 15 | 1 x 5.0 | Stainless Steel | MS Thread | MS Thread | 400 | 0.5 | ZEFT91A |
| DN16 | 34 | 100A | 3 | 1 x 6.35 | OFHC Copper | Direct to conductor | Direct to | 400 | 0.6 | ZEFT91I |
| DN40 | 70 | 40A | 15 | 4 x 5.0 | Stainless Steel | MS Thread | MS Thread | 400 | 0.6 | ZEFT34A |
| DN40 | 70 | 40A | 15 | 3 x 5.0 | Stainless Steel | MS Thread | MS Thread | 400 | 0.6 | ZEFT3A |
| Weld fitting | 40A | 15 | 1 x 5.0 | Stainless Steel | MS Thread | MS Thread | 400 | 0.2 | ZEFTIAN | |
| Flange Size | 70mm |
|---|---|
| Power | Yes |
| Thermocouple | No |
| Upgrades | No |
Features
- Large variety of electrical feedthroughs with wide range of electrical ratings to cover most requirements
- Voltage ratings are conservative DC flashover with clean ceramics
- Up to 600A dependant on Feedthrough