UHV Accessory Products For All Applications


View our range of high quality and reliable UHV accessory products for prototype development and general laboratory use cases including all vacuum chambers and associated applications. VACGEN has supplied a wide range of auxiliary products for many years including viewports, flanges and gaskets, UHV fittings and sublimation pumps

Gaskets

Viewports

Flanges

Ultra High Vacuum Conflat Flanges
Our Gaskets are manufactured from oxygen-free, high-conductivity copper and are specifically designed for UHV applications. We supply in a range of standard types including commercial grade for large quantities, etched for a super clean environment, annealed for use with viewports and silver plated for synchrotron and low mag environments.VACGEN offer a complete range of UHV compatible viewports to suit all clean and UHV applications. They have a wide angle of vision, maximum protection from accidental damage and minimum transmission of strain from flange bolts.Conflat flanges (CF) are designed to enable affordable, repeatable seals, that have low leak rate and the ability to withstand the high temperatures used for de-gassing (up to 450°C) without leaking. Our range of UHV flanges are fully compatible with the internationally agreed standards and will connect to any other compliant CF flange. Available, as standard, in 304L and 316LN ESR.

Fittings

Sublimation Pump

Feedthroughs

Ultra High Vacuum Fittings
Fittings can be used for connecting different parts of the UHV system. Our range of fittings include tubulated flanges, straight connectors, tee pieces, 4-way and 6-way crosses, radius elbows and flexible connectors.Our sublimation pump is designed to operate between 1x10-4 to 1x10-12 mbar and have interchangeable filaments for the sub pump head. The sub pump is operated using the SPC8 controller which provides all the necessary features for sub pump operation.Feedthroughs are designed to carry services into the vacuum environments. Instrumentation, power and liquid feedthroughs are available in a variety of orientations.

Ion Gauges

Hinged Doors

Port Aligner

Our pressure measurement products are designed to operate from atmospheric pressure to 1x10-10 mbar. The IGC5 controller can run a Pirani Gauge and Ion Gauge, covering the wide range of operating pressures encountered when taking a system down to UHV environments. We also supply a range of spares for our Ion Gauges including filaments, grids and connectors.The HD range of fast entry air lock doors can be used to load items into a prep chamber. They come in two configurations - either a plain door, or with a built-in viewport. This is an ideal solution for keeping the main system under UHV conditions whilst a sample is loaded.A port aligner allows the precise mechanical alignment of sample transfer and docking systems, such as MLRV and RLRP. They are a cost-effective way to save time during system installation, where sample transfer tools are being set up for the first time.
View as List Grid

Items 1-60 of 268

Page
per page
Set Descending Direction
  1. 1 Way 100A 3Kv DN19CF Feedthrough
    8 to 10 weeks delivery
    Instrumentation feedthroughs are used to carry electrical signals (Including Thermocouple) which are normally low current and/or voltage. These feedthroughs are available in multi pin versions on either 34mm or 70mm OD flanges. These also come with the option of a European voltage compliant connectors
  2. 1 Way 40A 15Kv DN19CF Feedthrough
    8 to 10 weeks delivery
    Instrumentation feedthroughs are used to carry electrical signals (Including Thermocouple) which are normally low current and/or voltage. These feedthroughs are available in multi pin versions on either 34mm or 70mm OD flanges. These also come with the option of a European voltage compliant connectors
  3. 1 Way 40A 15Kv Unflanged Feedthrough
    8 to 10 weeks delivery
    Instrumentation feedthroughs are used to carry electrical signals (Including Thermocouple) which are normally low current and/or voltage. These feedthroughs are available in multi pin versions on either 34mm or 70mm OD flanges. These also come with the option of a European voltage compliant connectors
  4. 1 Way MHV Co-Ax Feedthrough
    8 to 10 weeks delivery
    Instrumentation feedthroughs are used to carry electrical signals (Including Thermocouple) which are normally low current and/or voltage. These feedthroughs are available in multi pin versions on either 34mm or 70mm OD flanges. These also come with the option of a European voltage compliant connectors
  5. 10M Thermocouple Cable
    8 to 10 weeks delivery
    £273.22
    IGC5 is an Ion gauge which combines the functionality of several vacuum system controllers into a single easy to use unit, reducing hardware, wiring and cost. The IGC5 combines the latest microprocessor technology in a 19" 1U rack mount unit, which is very stability and reliability. The IGC5 also offers Bake Out and Pirani Gauge option as standard.
  6. 11 Way 5A DN38CF Feedthrough
    8 to 10 weeks delivery
    Instrumentation feedthroughs are used to carry electrical signals (Including Thermocouple) which are normally low current and/or voltage. These feedthroughs are available in multi pin versions on either 34mm or 70mm OD flanges. These also come with the option of a European voltage compliant connectors
  7. 11 Way Insulated Centre Pin 5A DN38CF Feedthrough
    8 to 10 weeks delivery
    Instrumentation feedthroughs are used to carry electrical signals (Including Thermocouple) which are normally low current and/or voltage. These feedthroughs are available in multi pin versions on either 34mm or 70mm OD flanges. These also come with the option of a European voltage compliant connectors
  8. 114mm OD - 304L Fixed Blank CF Flange
    8 to 10 weeks delivery
    £46.60
    Fixed blank Conflat flange (CF) are available in the full range of sizes. These are used to blank off unused chamber ports for leak-tight assembly, also allowing End User machining for non standard tube sizes or components.
  9. 114mm OD - 304L Rotable Blank CF Flange
    8 to 10 weeks delivery
    Rotatable blank Conflat flange (CF) consists of two parts, the inner knife edge detail and the outer bolt hole retaining ring which rotates around the inner part. This allows the boltholes to align to mating flanges in any orientation. These are used to blank off unused chamber ports for leak-tight assembly, also allowing End User machining for non standard tube sizes or components.
  10. 114mm OD - 304L Tapped Fixed Blank CF Flange
    8 to 10 weeks delivery
    Fixed blank Conflat flange (CF) are available in the full range of sizes. These are used to blank off unused chamber ports for leak-tight assembly, also allowing End User machining for non standard tube sizes or components.
  11. 114mm OD - 316LN (2D) Fixed Blank CF Flange
    8 to 10 weeks delivery
    Fixed blank Conflat flange (CF) are available in the full range of sizes. These are used to blank off unused chamber ports for leak-tight assembly, also allowing End User machining for non standard tube sizes or components.
  12. 114mm OD - 316LN (2D) Rotable Blank CF Flange
    8 to 10 weeks delivery
    Rotatable blank Conflat flange (CF) consists of two parts, the inner knife edge detail and the outer bolt hole retaining ring which rotates around the inner part. This allows the boltholes to align to mating flanges in any orientation. These are used to blank off unused chamber ports for leak-tight assembly, also allowing End User machining for non standard tube sizes or components.
  13. 114mm OD - 316LN (2D) Tapped Fixed Blank CF Flange
    8 to 10 weeks delivery
    Fixed blank Conflat flange (CF) are available in the full range of sizes. These are used to blank off unused chamber ports for leak-tight assembly, also allowing End User machining for non standard tube sizes or components.
  14. 114mm OD 70mm ID - 304L Fixed Bored CF Flange
    8 to 10 weeks delivery
    Fixed bored Conflat flange (CF) are available in the full range of sizes. The smaller range of flange can accept a number of different standard tube sizes. These are prepared ready for welding onto chamber tubulations or components.
  15. 114mm OD 70mm ID - 304L Rotable Bored CF Flange
    8 to 10 weeks delivery
    £73.26
    Rotatable bored Conflat Flange (CF) are available in the full range of sizes. The smaller range of flange can accept a number of different standard tube sizes. These are prepared ready for welding onto chamber tubulations or components. The rotatable flange consists of two parts, the inner knife edge detail and the outer bolt hole retaining ring which rotates around the inner part.
  16. 114mm OD 70mm ID - 304L Tapped Fixed Bored CF Flange
    8 to 10 weeks delivery
    £59.19
    Fixed bored Conflat flange (CF) are available in the full range of sizes. The smaller range of flange can accept a number of different standard tube sizes. These are prepared ready for welding onto chamber tubulations or components.
  17. 114mm OD 70mm ID - 304L Tapped Rotable Bored CF Flange
    8 to 10 weeks delivery
    £85.47
    Rotatable bored Conflat Flange (CF) are available in the full range of sizes. The smaller range of flange can accept a number of different standard tube sizes. These are prepared ready for welding onto chamber tubulations or components. The rotatable flange consists of two parts, the inner knife edge detail and the outer bolt hole retaining ring which rotates around the inner part.
  18. 114mm OD 70mm ID - 316LN (2D) Fixed Bored CF Flange
    8 to 10 weeks delivery
    Fixed bored Conflat flange (CF) are available in the full range of sizes. The smaller range of flange can accept a number of different standard tube sizes. These are prepared ready for welding onto chamber tubulations or components.
  19. 114mm to 34mm OD 304L Zero Length Bored Adaptors
    8 to 10 weeks delivery
    Zero Length Adaptor conflat Flange (CF) are used to adapt from one flange size to another. The larger flange OD has through bolt holes enabling ordinary nut and bolt to be used. The smaller flange OD has metric tapped holes. This connects different sizes of flanges where there is limited space and does not increase the chamber volume.
  20. 114mm to 70mm OD 304L Zero Length Bored Adaptors
    8 to 10 weeks delivery
    £114.24
    Zero Length Adaptor conflat Flange (CF) are used to adapt from one flange size to another. The larger flange OD has through bolt holes enabling ordinary nut and bolt to be used. The smaller flange OD has metric tapped holes. This connects different sizes of flanges where there is limited space and does not increase the chamber volume.
  21. 114mm to 70mm OD 316LN (2D) Zero Length Bored Adaptors
    8 to 10 weeks delivery
    £86.43
    Zero Length Adaptor conflat Flange (CF) are used to adapt from one flange size to another. The larger flange OD has through bolt holes enabling ordinary nut and bolt to be used. The smaller flange OD has metric tapped holes. This connects different sizes of flanges where there is limited space and does not increase the chamber volume.
  22. 152mm OD - 304L Fixed Blank CF Flange
    8 to 10 weeks delivery
    £82.50
    Fixed blank Conflat flange (CF) are available in the full range of sizes. These are used to blank off unused chamber ports for leak-tight assembly, also allowing End User machining for non standard tube sizes or components.
  23. 152mm OD - 304L Rotable Blank CF Flange
    8 to 10 weeks delivery
    Rotatable blank Conflat flange (CF) consists of two parts, the inner knife edge detail and the outer bolt hole retaining ring which rotates around the inner part. This allows the boltholes to align to mating flanges in any orientation. These are used to blank off unused chamber ports for leak-tight assembly, also allowing End User machining for non standard tube sizes or components.
  24. 152mm OD - 304L Tapped Fixed Blank CF Flange
    8 to 10 weeks delivery
    Fixed blank Conflat flange (CF) are available in the full range of sizes. These are used to blank off unused chamber ports for leak-tight assembly, also allowing End User machining for non standard tube sizes or components.
  25. 152mm OD - 316LN (2D) Fixed Blank CF Flange
    8 to 10 weeks delivery
    Fixed blank Conflat flange (CF) are available in the full range of sizes. These are used to blank off unused chamber ports for leak-tight assembly, also allowing End User machining for non standard tube sizes or components.
  26. 152mm OD - 316LN (2D) Rotable Blank CF Flange
    8 to 10 weeks delivery
    Rotatable blank Conflat flange (CF) consists of two parts, the inner knife edge detail and the outer bolt hole retaining ring which rotates around the inner part. This allows the boltholes to align to mating flanges in any orientation. These are used to blank off unused chamber ports for leak-tight assembly, also allowing End User machining for non standard tube sizes or components.
  27. 152mm OD 102mm ID - 304L Fixed Bored CF Flange
    8 to 10 weeks delivery
    Fixed bored Conflat flange (CF) are available in the full range of sizes. The smaller range of flange can accept a number of different standard tube sizes. These are prepared ready for welding onto chamber tubulations or components.
  28. 152mm OD 102mm ID - 304L Rotable Bored CF Flange
    8 to 10 weeks delivery
    £97.68
    Rotatable bored Conflat Flange (CF) are available in the full range of sizes. The smaller range of flange can accept a number of different standard tube sizes. These are prepared ready for welding onto chamber tubulations or components. The rotatable flange consists of two parts, the inner knife edge detail and the outer bolt hole retaining ring which rotates around the inner part.
  29. 152mm OD 102mm ID - 304L Tapped Fixed Bored CF Flange
    8 to 10 weeks delivery
    Fixed bored Conflat flange (CF) are available in the full range of sizes. The smaller range of flange can accept a number of different standard tube sizes. These are prepared ready for welding onto chamber tubulations or components.
  30. 152mm OD 102mm ID - 304L Tapped Rotable Bored CF FlangeM8
    8 to 10 weeks delivery
    £103.79
    Rotatable bored Conflat Flange (CF) are available in the full range of sizes. The smaller range of flange can accept a number of different standard tube sizes. These are prepared ready for welding onto chamber tubulations or components. The rotatable flange consists of two parts, the inner knife edge detail and the outer bolt hole retaining ring which rotates around the inner part.
  31. 152mm OD 102mm ID - 316LN (2D) Fixed Bored CF Flange2D)
    8 to 10 weeks delivery
    £298.57
    Fixed bored Conflat flange (CF) are available in the full range of sizes. The smaller range of flange can accept a number of different standard tube sizes. These are prepared ready for welding onto chamber tubulations or components.
  32. 152mm OD 102mm ID - 316LN (2D) Rotable Bored CF Flange
    8 to 10 weeks delivery
    £407.00
    Rotatable bored Conflat Flange (CF) are available in the full range of sizes. The smaller range of flange can accept a number of different standard tube sizes. These are prepared ready for welding onto chamber tubulations or components. The rotatable flange consists of two parts, the inner knife edge detail and the outer bolt hole retaining ring which rotates around the inner part.
  33. 152mm OD 102mm ID - 316LN (2D) Tapped Fixed Bored CF Flange
    8 to 10 weeks delivery
    Fixed bored Conflat flange (CF) are available in the full range of sizes. The smaller range of flange can accept a number of different standard tube sizes. These are prepared ready for welding onto chamber tubulations or components.
  34. 152mm to 114mm OD 304L Zero Length Bored Adaptors
    8 to 10 weeks delivery
    Zero Length Adaptor conflat Flange (CF) are used to adapt from one flange size to another. The larger flange OD has through bolt holes enabling ordinary nut and bolt to be used. The smaller flange OD has metric tapped holes. This connects different sizes of flanges where there is limited space and does not increase the chamber volume.
  35. 152mm to 70mm OD 304L Zero Length Bored Adaptors
    8 to 10 weeks delivery
    £120.31
    Zero Length Adaptor conflat Flange (CF) are used to adapt from one flange size to another. The larger flange OD has through bolt holes enabling ordinary nut and bolt to be used. The smaller flange OD has metric tapped holes. This connects different sizes of flanges where there is limited space and does not increase the chamber volume.
  36. 152mm to 70mm OD 316LN (2D) Zero Length Bored Adaptors
    8 to 10 weeks delivery
    £1,159.95
    Zero Length Adaptor conflat Flange (CF) are used to adapt from one flange size to another. The larger flange OD has through bolt holes enabling ordinary nut and bolt to be used. The smaller flange OD has metric tapped holes. This connects different sizes of flanges where there is limited space and does not increase the chamber volume.
  37. 203mm OD - 304L Fixed Blank CF Flange
    8 to 10 weeks delivery
    £143.07
    Fixed blank Conflat flange (CF) are available in the full range of sizes. These are used to blank off unused chamber ports for leak-tight assembly, also allowing End User machining for non standard tube sizes or components.
  38. 203mm OD - 304L Rotable Blank CF Flange
    8 to 10 weeks delivery
    £0.00
    Rotatable blank Conflat flange (CF) consists of two parts, the inner knife edge detail and the outer bolt hole retaining ring which rotates around the inner part. This allows the boltholes to align to mating flanges in any orientation. These are used to blank off unused chamber ports for leak-tight assembly, also allowing End User machining for non standard tube sizes or components.
  39. 203mm OD - 304L Tapped Fixed Blank CF Flange
    8 to 10 weeks delivery
    Fixed blank Conflat flange (CF) are available in the full range of sizes. These are used to blank off unused chamber ports for leak-tight assembly, also allowing End User machining for non standard tube sizes or components.
  40. 203mm OD - 316LN (2D) Fixed Blank CF Flange
    8 to 10 weeks delivery
    Fixed blank Conflat flange (CF) are available in the full range of sizes. These are used to blank off unused chamber ports for leak-tight assembly, also allowing End User machining for non standard tube sizes or components.
  41. 203mm OD - 316LN (2D) Rotable Blank CF Flange
    8 to 10 weeks delivery
    £0.00
    Rotatable blank Conflat flange (CF) consists of two parts, the inner knife edge detail and the outer bolt hole retaining ring which rotates around the inner part. This allows the boltholes to align to mating flanges in any orientation. These are used to blank off unused chamber ports for leak-tight assembly, also allowing End User machining for non standard tube sizes or components.
  42. 203mm OD - 316LN (2D) Tapped Fixed Blank CF Flange
    8 to 10 weeks delivery
    Fixed blank Conflat flange (CF) are available in the full range of sizes. These are used to blank off unused chamber ports for leak-tight assembly, also allowing End User machining for non standard tube sizes or components.
  43. 203mm OD 153mm ID - 304L Fixed Bored CF Flange
    8 to 10 weeks delivery
    £135.33
    Fixed bored Conflat flange (CF) are available in the full range of sizes. The smaller range of flange can accept a number of different standard tube sizes. These are prepared ready for welding onto chamber tubulations or components.
  44. 203mm OD 153mm ID - 304L Rotable Bored CF Flange
    8 to 10 weeks delivery
    £195.36
    Rotatable bored Conflat Flange (CF) are available in the full range of sizes. The smaller range of flange can accept a number of different standard tube sizes. These are prepared ready for welding onto chamber tubulations or components. The rotatable flange consists of two parts, the inner knife edge detail and the outer bolt hole retaining ring which rotates around the inner part.
  45. 203mm OD 153mm ID - 304L Tapped Fixed Bored CF Flange
    8 to 10 weeks delivery
    Fixed bored Conflat flange (CF) are available in the full range of sizes. The smaller range of flange can accept a number of different standard tube sizes. These are prepared ready for welding onto chamber tubulations or components.
  46. 203mm OD 153mm ID - 304L Tapped Rotable Bored CF Flange
    8 to 10 weeks delivery
    £0.00
    Rotatable bored Conflat Flange (CF) are available in the full range of sizes. The smaller range of flange can accept a number of different standard tube sizes. These are prepared ready for welding onto chamber tubulations or components. The rotatable flange consists of two parts, the inner knife edge detail and the outer bolt hole retaining ring which rotates around the inner part.
  47. 203mm OD 153mm ID - 316LN (2D) Fixed Bored CF Flange
    8 to 10 weeks delivery
    Fixed bored Conflat flange (CF) are available in the full range of sizes. The smaller range of flange can accept a number of different standard tube sizes. These are prepared ready for welding onto chamber tubulations or components.
  48. 203mm OD 153mm ID - 316LN (2D) Rotable Bored CF Flange
    8 to 10 weeks delivery
    Rotatable bored Conflat Flange (CF) are available in the full range of sizes. The smaller range of flange can accept a number of different standard tube sizes. These are prepared ready for welding onto chamber tubulations or components. The rotatable flange consists of two parts, the inner knife edge detail and the outer bolt hole retaining ring which rotates around the inner part.
  49. 203mm OD 153mm ID - 316LN (2D) Tapped Fixed Bored CF Flange
    8 to 10 weeks delivery
    Fixed bored Conflat flange (CF) are available in the full range of sizes. The smaller range of flange can accept a number of different standard tube sizes. These are prepared ready for welding onto chamber tubulations or components.
  50. 203mm to 114mm OD 304L Zero Length Bored Adaptors
    8 to 10 weeks delivery
    Zero Length Adaptor conflat Flange (CF) are used to adapt from one flange size to another. The larger flange OD has through bolt holes enabling ordinary nut and bolt to be used. The smaller flange OD has metric tapped holes. This connects different sizes of flanges where there is limited space and does not increase the chamber volume.
  51. 203mm to 152mm OD 304L Zero Length Bored Adaptors
    8 to 10 weeks delivery
    Zero Length Adaptor conflat Flange (CF) are used to adapt from one flange size to another. The larger flange OD has through bolt holes enabling ordinary nut and bolt to be used. The smaller flange OD has metric tapped holes. This connects different sizes of flanges where there is limited space and does not increase the chamber volume.
  52. 203mm to 70mm OD 304L Zero Length Bored Adaptors
    8 to 10 weeks delivery
    Zero Length Adaptor conflat Flange (CF) are used to adapt from one flange size to another. The larger flange OD has through bolt holes enabling ordinary nut and bolt to be used. The smaller flange OD has metric tapped holes. This connects different sizes of flanges where there is limited space and does not increase the chamber volume.
  53. 254mm OD - 304L Fixed Blank CF Flange
    8 to 10 weeks delivery
    Fixed blank Conflat flange (CF) are available in the full range of sizes. These are used to blank off unused chamber ports for leak-tight assembly, also allowing End User machining for non standard tube sizes or components.
  54. 254mm OD - 304L Rotable Blank CF Flange
    8 to 10 weeks delivery
    Rotatable blank Conflat flange (CF) consists of two parts, the inner knife edge detail and the outer bolt hole retaining ring which rotates around the inner part. This allows the boltholes to align to mating flanges in any orientation. These are used to blank off unused chamber ports for leak-tight assembly, also allowing End User machining for non standard tube sizes or components.
  55. 254mm OD 206mm ID - 304L Rotable Bored CF Flange
    8 to 10 weeks delivery
    £0.00
    Rotatable bored Conflat Flange (CF) are available in the full range of sizes. The smaller range of flange can accept a number of different standard tube sizes. These are prepared ready for welding onto chamber tubulations or components. The rotatable flange consists of two parts, the inner knife edge detail and the outer bolt hole retaining ring which rotates around the inner part.
  56. 254mm OD 206mm ID - 304L Tapped Rotable Bored CF Flange
    8 to 10 weeks delivery
    £0.00
    Rotatable bored Conflat Flange (CF) are available in the full range of sizes. The smaller range of flange can accept a number of different standard tube sizes. These are prepared ready for welding onto chamber tubulations or components. The rotatable flange consists of two parts, the inner knife edge detail and the outer bolt hole retaining ring which rotates around the inner part.
  57. 254mm to 114mm OD 304L Zero Length Bored Adaptors
    8 to 10 weeks delivery
    Zero Length Adaptor conflat Flange (CF) are used to adapt from one flange size to another. The larger flange OD has through bolt holes enabling ordinary nut and bolt to be used. The smaller flange OD has metric tapped holes. This connects different sizes of flanges where there is limited space and does not increase the chamber volume.
  58. 254mm to 152mm OD 304L Zero Length Bored Adaptors
    8 to 10 weeks delivery
    Zero Length Adaptor conflat Flange (CF) are used to adapt from one flange size to another. The larger flange OD has through bolt holes enabling ordinary nut and bolt to be used. The smaller flange OD has metric tapped holes. This connects different sizes of flanges where there is limited space and does not increase the chamber volume.
  59. 254mm to 203mm OD 304L Zero Length Bored Adaptors
    8 to 10 weeks delivery
    Zero Length Adaptor conflat Flange (CF) are used to adapt from one flange size to another. The larger flange OD has through bolt holes enabling ordinary nut and bolt to be used. The smaller flange OD has metric tapped holes. This connects different sizes of flanges where there is limited space and does not increase the chamber volume.
  60. 254mm to 70mm OD 304L Zero Length Bored Adaptors
    8 to 10 weeks delivery
    Zero Length Adaptor conflat Flange (CF) are used to adapt from one flange size to another. The larger flange OD has through bolt holes enabling ordinary nut and bolt to be used. The smaller flange OD has metric tapped holes. This connects different sizes of flanges where there is limited space and does not increase the chamber volume.
View as List Grid

Items 1-60 of 268

Page
per page
Set Descending Direction