Flanges
Conflat flanges (CF) are designed to enable affordable, repeatable seals, that have low leak rate and the ability to withstand the high temperatures used for de-gassing (up to 450°C) without leaking. Our range of UHV flanges are fully compatible with the internationally agreed standards and will connect to any other compliant CF flange. Available, as standard, in 304L and 316LN ESR.
-
34mm OD - 304L Fixed Blank CF FlangeSKU: CF34£8.47Fixed blank Conflat flange (CF) are available in the full range of sizes. These are used to blank off unused chamber ports for leak-tight assembly, also allowing End User machining for non standard tube sizes or components. -
34mm OD - 304L Tapped Fixed Blank CF FlangeSKU: CF34T£12.70Fixed blank Conflat flange (CF) are available in the full range of sizes. These are used to blank off unused chamber ports for leak-tight assembly, also allowing End User machining for non standard tube sizes or components. -
70mm OD - 304L Fixed Blank CF FlangeSKU: CF70£11.06Fixed blank Conflat flange (CF) are available in the full range of sizes. These are used to blank off unused chamber ports for leak-tight assembly, also allowing End User machining for non standard tube sizes or components. -
70mm OD - 304L Tapped Fixed Blank CF FlangeSKU: CF70T£15.72Fixed blank Conflat flange (CF) are available in the full range of sizes. These are used to blank off unused chamber ports for leak-tight assembly, also allowing End User machining for non standard tube sizes or components. -
114mm OD - 304L Fixed Blank CF FlangeSKU: CF1144 to 6 weeks delivery£35.02Fixed blank Conflat flange (CF) are available in the full range of sizes. These are used to blank off unused chamber ports for leak-tight assembly, also allowing End User machining for non standard tube sizes or components. -
114mm OD - 304L Tapped Fixed Blank CF FlangeSKU: CF114T£45.16Fixed blank Conflat flange (CF) are available in the full range of sizes. These are used to blank off unused chamber ports for leak-tight assembly, also allowing End User machining for non standard tube sizes or components. -
152mm OD - 304L Fixed Blank CF FlangeSKU: CF152£59.90Fixed blank Conflat flange (CF) are available in the full range of sizes. These are used to blank off unused chamber ports for leak-tight assembly, also allowing End User machining for non standard tube sizes or components. -
152mm OD - 304L Tapped Fixed Blank CF FlangeSKU: CF152T£75.60Fixed blank Conflat flange (CF) are available in the full range of sizes. These are used to blank off unused chamber ports for leak-tight assembly, also allowing End User machining for non standard tube sizes or components. -
203mm OD - 304L Fixed Blank CF FlangeSKU: CF203£101.37Fixed blank Conflat flange (CF) are available in the full range of sizes. These are used to blank off unused chamber ports for leak-tight assembly, also allowing End User machining for non standard tube sizes or components. -
203mm OD - 304L Tapped Fixed Blank CF FlangeSKU: CF203T4 to 6 weeks delivery£120.96Fixed blank Conflat flange (CF) are available in the full range of sizes. These are used to blank off unused chamber ports for leak-tight assembly, also allowing End User machining for non standard tube sizes or components. -
254mm OD - 304L Fixed Blank CF FlangeSKU: CF254£151.58Fixed blank Conflat flange (CF) are available in the full range of sizes. These are used to blank off unused chamber ports for leak-tight assembly, also allowing End User machining for non standard tube sizes or components. -
34mm OD 19mm ID - 304L Fixed Bored CF FlangeSKU: CF34-19£8.61Fixed bored Conflat flange (CF) are available in the full range of sizes. The smaller range of flange can accept a number of different standard tube sizes. These are prepared ready for welding onto chamber tubulations or components. -
34mm OD 19mm ID - 304L Tapped Fixed Bored CF FlangeSKU: CF34T-19£9.39Fixed bored Conflat flange (CF) are available in the full range of sizes. The smaller range of flange can accept a number of different standard tube sizes. These are prepared ready for welding onto chamber tubulations or components. -
70mm OD 41mm ID - 304L Fixed Bored CF FlangeSKU: CF70-41£11.07Fixed bored Conflat flange (CF) are available in the full range of sizes. The smaller range of flange can accept a number of different standard tube sizes. These are prepared ready for welding onto chamber tubulations or components. -
70mm OD 41mm ID - 304L Tapped Fixed Bored CF FlangeSKU: CF70T-41£15.99Fixed bored Conflat flange (CF) are available in the full range of sizes. The smaller range of flange can accept a number of different standard tube sizes. These are prepared ready for welding onto chamber tubulations or components. -
114mm OD 70mm ID - 304L Fixed Bored CF FlangeSKU: CF114-70£39.37Fixed bored Conflat flange (CF) are available in the full range of sizes. The smaller range of flange can accept a number of different standard tube sizes. These are prepared ready for welding onto chamber tubulations or components. -
114mm OD 70mm ID - 304L Tapped Fixed Bored CF FlangeSKU: CF114T-70£49.83Fixed bored Conflat flange (CF) are available in the full range of sizes. The smaller range of flange can accept a number of different standard tube sizes. These are prepared ready for welding onto chamber tubulations or components. -
152mm OD 102mm ID - 304L Fixed Bored CF FlangeSKU: CF152-102£56.59Fixed bored Conflat flange (CF) are available in the full range of sizes. The smaller range of flange can accept a number of different standard tube sizes. These are prepared ready for welding onto chamber tubulations or components. -
152mm OD 102mm ID - 304L Tapped Fixed Bored CF FlangeSKU: CF152T-102£76.89Fixed bored Conflat flange (CF) are available in the full range of sizes. The smaller range of flange can accept a number of different standard tube sizes. These are prepared ready for welding onto chamber tubulations or components. -
203mm OD 153mm ID - 304L Fixed Bored CF FlangeSKU: CF203-153£86.12Fixed bored Conflat flange (CF) are available in the full range of sizes. The smaller range of flange can accept a number of different standard tube sizes. These are prepared ready for welding onto chamber tubulations or components. -
203mm OD 153mm ID - 304L Tapped Fixed Bored CF FlangeSKU: CF203T-153£123.03Fixed bored Conflat flange (CF) are available in the full range of sizes. The smaller range of flange can accept a number of different standard tube sizes. These are prepared ready for welding onto chamber tubulations or components. -
34mm OD - 304L Rotable Blank CF FlangeSKU: CFR344 to 6 weeks delivery£9.95Rotatable blank Conflat flange (CF) consists of two parts, the inner knife edge detail and the outer bolt hole retaining ring which rotates around the inner part. This allows the boltholes to align to mating flanges in any orientation. These are used to blank off unused chamber ports for leak-tight assembly, also allowing End User machining for non standard tube sizes or components. -
70mm OD - 304L Rotable Blank CF FlangeSKU: CFR70£15.72Rotatable blank Conflat flange (CF) consists of two parts, the inner knife edge detail and the outer bolt hole retaining ring which rotates around the inner part. This allows the boltholes to align to mating flanges in any orientation. These are used to blank off unused chamber ports for leak-tight assembly, also allowing End User machining for non standard tube sizes or components. -
114mm OD - 304L Rotable Blank CF FlangeSKU: CFR1144 to 6 weeks delivery£241.66Rotatable blank Conflat flange (CF) consists of two parts, the inner knife edge detail and the outer bolt hole retaining ring which rotates around the inner part. This allows the boltholes to align to mating flanges in any orientation. These are used to blank off unused chamber ports for leak-tight assembly, also allowing End User machining for non standard tube sizes or components. -
152mm OD - 304L Rotable Blank CF FlangeSKU: CFR1524 to 6 weeks delivery£70.16Rotatable blank Conflat flange (CF) consists of two parts, the inner knife edge detail and the outer bolt hole retaining ring which rotates around the inner part. This allows the boltholes to align to mating flanges in any orientation. These are used to blank off unused chamber ports for leak-tight assembly, also allowing End User machining for non standard tube sizes or components. -
203mm OD - 304L Rotable Blank CF FlangeSKU: CFR2034 to 6 weeks delivery£426.15Rotatable blank Conflat flange (CF) consists of two parts, the inner knife edge detail and the outer bolt hole retaining ring which rotates around the inner part. This allows the boltholes to align to mating flanges in any orientation. These are used to blank off unused chamber ports for leak-tight assembly, also allowing End User machining for non standard tube sizes or components. -
254mm OD - 304L Rotable Blank CF FlangeSKU: CFR2544 to 6 weeks delivery£510.53Rotatable blank Conflat flange (CF) consists of two parts, the inner knife edge detail and the outer bolt hole retaining ring which rotates around the inner part. This allows the boltholes to align to mating flanges in any orientation. These are used to blank off unused chamber ports for leak-tight assembly, also allowing End User machining for non standard tube sizes or components. -
34mm OD 6mm ID - 304L Rotable Bored CF FlangeSKU: CFR34-64 to 6 weeks delivery£9.95Rotatable bored Conflat Flange (CF) are available in the full range of sizes. The smaller range of flange can accept a number of different standard tube sizes. These are prepared ready for welding onto chamber tubulations or components. The rotatable flange consists of two parts, the inner knife edge detail and the outer bolt hole retaining ring which rotates around the inner part. -
34mm OD 6mm ID - 304L Tapped Rotable Bored CF FlangeSKU: CFR34T-64 to 6 weeks delivery£0.00Rotatable bored Conflat Flange (CF) are available in the full range of sizes. The smaller range of flange can accept a number of different standard tube sizes. These are prepared ready for welding onto chamber tubulations or components. The rotatable flange consists of two parts, the inner knife edge detail and the outer bolt hole retaining ring which rotates around the inner part. -
70mm OD 41mm ID - 304L Rotable Bored CF FlangeSKU: CFR70-41£21.14Rotatable bored Conflat Flange (CF) are available in the full range of sizes. The smaller range of flange can accept a number of different standard tube sizes. These are prepared ready for welding onto chamber tubulations or components. The rotatable flange consists of two parts, the inner knife edge detail and the outer bolt hole retaining ring which rotates around the inner part. -
70mm OD 41mm ID - 304L Tapped Bored CF FlangeSKU: CFR70T-41£23.30Rotatable bored Conflat Flange (CF) are available in the full range of sizes. The smaller range of flange can accept a number of different standard tube sizes. These are prepared ready for welding onto chamber tubulations or components. The rotatable flange consists of two parts, the inner knife edge detail and the outer bolt hole retaining ring which rotates around the inner part. -
114mm OD 70mm ID - 304L Rotable Bored CF FlangeSKU: CFR114-70£39.93Rotatable bored Conflat Flange (CF) are available in the full range of sizes. The smaller range of flange can accept a number of different standard tube sizes. These are prepared ready for welding onto chamber tubulations or components. The rotatable flange consists of two parts, the inner knife edge detail and the outer bolt hole retaining ring which rotates around the inner part. -
114mm OD 70mm ID - 304L Tapped Rotable Bored CF FlangeSKU: CFR114T-704 to 6 weeks delivery£55.19Rotatable bored Conflat Flange (CF) are available in the full range of sizes. The smaller range of flange can accept a number of different standard tube sizes. These are prepared ready for welding onto chamber tubulations or components. The rotatable flange consists of two parts, the inner knife edge detail and the outer bolt hole retaining ring which rotates around the inner part. -
152mm OD 102mm ID - 304L Rotable Bored CF FlangeSKU: CFR152-102£68.11Rotatable bored Conflat Flange (CF) are available in the full range of sizes. The smaller range of flange can accept a number of different standard tube sizes. These are prepared ready for welding onto chamber tubulations or components. The rotatable flange consists of two parts, the inner knife edge detail and the outer bolt hole retaining ring which rotates around the inner part. -
152mm OD 102mm ID - 304L Tapped Rotable Bored CF FlangeM8SKU: CFR152T-1024 to 6 weeks delivery£83.97Rotatable bored Conflat Flange (CF) are available in the full range of sizes. The smaller range of flange can accept a number of different standard tube sizes. These are prepared ready for welding onto chamber tubulations or components. The rotatable flange consists of two parts, the inner knife edge detail and the outer bolt hole retaining ring which rotates around the inner part. -
203mm OD 153mm ID - 304L Rotable Bored CF FlangeSKU: CFR203-1534 to 6 weeks delivery£129.18Rotatable bored Conflat Flange (CF) are available in the full range of sizes. The smaller range of flange can accept a number of different standard tube sizes. These are prepared ready for welding onto chamber tubulations or components. The rotatable flange consists of two parts, the inner knife edge detail and the outer bolt hole retaining ring which rotates around the inner part. -
203mm OD 153mm ID - 304L Tapped Rotable Bored CF FlangeSKU: CFR203T-1534 to 6 weeks delivery£358.44Rotatable bored Conflat Flange (CF) are available in the full range of sizes. The smaller range of flange can accept a number of different standard tube sizes. These are prepared ready for welding onto chamber tubulations or components. The rotatable flange consists of two parts, the inner knife edge detail and the outer bolt hole retaining ring which rotates around the inner part. -
254mm OD 206mm ID - 304L Rotable Bored CF FlangeSKU: CFR254-2064 to 6 weeks delivery£0.00Rotatable bored Conflat Flange (CF) are available in the full range of sizes. The smaller range of flange can accept a number of different standard tube sizes. These are prepared ready for welding onto chamber tubulations or components. The rotatable flange consists of two parts, the inner knife edge detail and the outer bolt hole retaining ring which rotates around the inner part. -
254mm OD 206mm ID - 304L Tapped Rotable Bored CF FlangeSKU: CFR254T-2064 to 6 weeks delivery£0.00Rotatable bored Conflat Flange (CF) are available in the full range of sizes. The smaller range of flange can accept a number of different standard tube sizes. These are prepared ready for welding onto chamber tubulations or components. The rotatable flange consists of two parts, the inner knife edge detail and the outer bolt hole retaining ring which rotates around the inner part. -
34mm OD - 316LN (2D) Fixed Blank CF FlangeSKU: CF34-LN£11.74Fixed blank Conflat flange (CF) are available in the full range of sizes. These are used to blank off unused chamber ports for leak-tight assembly, also allowing End User machining for non standard tube sizes or components. -
34mm OD - 316LN (2D) Tapped Fixed Blank CF FlangeSKU: CF34T-LN4 to 6 weeks delivery£16.78Fixed blank Conflat flange (CF) are available in the full range of sizes. These are used to blank off unused chamber ports for leak-tight assembly, also allowing End User machining for non standard tube sizes or components. -
70mm OD - 316LN (2D) Fixed Blank CF FlangeSKU: CF70-LN£23.49Fixed blank Conflat flange (CF) are available in the full range of sizes. These are used to blank off unused chamber ports for leak-tight assembly, also allowing End User machining for non standard tube sizes or components. -
70mm OD - 316LN (2D) Tapped Fixed Blank CF FlangeSKU: CF70T-LN£69.67Fixed blank Conflat flange (CF) are available in the full range of sizes. These are used to blank off unused chamber ports for leak-tight assembly, also allowing End User machining for non standard tube sizes or components. -
114mm OD - 316LN (2D) Fixed Blank CF FlangeSKU: CF114-LN£123.03Fixed blank Conflat flange (CF) are available in the full range of sizes. These are used to blank off unused chamber ports for leak-tight assembly, also allowing End User machining for non standard tube sizes or components. -
114mm OD - 316LN (2D) Tapped Fixed Blank CF FlangeSKU: CF114T-LN4 to 6 weeks delivery£164.41Fixed blank Conflat flange (CF) are available in the full range of sizes. These are used to blank off unused chamber ports for leak-tight assembly, also allowing End User machining for non standard tube sizes or components. -
152mm OD - 316LN (2D) Fixed Blank CF FlangeSKU: CF152-LN£147.43Fixed blank Conflat flange (CF) are available in the full range of sizes. These are used to blank off unused chamber ports for leak-tight assembly, also allowing End User machining for non standard tube sizes or components. -
203mm OD - 316LN (2D) Fixed Blank CF FlangeSKU: CF203-LN£238.94Fixed blank Conflat flange (CF) are available in the full range of sizes. These are used to blank off unused chamber ports for leak-tight assembly, also allowing End User machining for non standard tube sizes or components. -
203mm OD - 316LN (2D) Tapped Fixed Blank CF FlangeSKU: CF203T-LN£453.56Fixed blank Conflat flange (CF) are available in the full range of sizes. These are used to blank off unused chamber ports for leak-tight assembly, also allowing End User machining for non standard tube sizes or components. -
34mm OD 19mm ID - 316LN (2D) Fixed Bored CF FlangeSKU: CF34-19-LN£14.68Fixed bored Conflat flange (CF) are available in the full range of sizes. The smaller range of flange can accept a number of different standard tube sizes. These are prepared ready for welding onto chamber tubulations or components. -
34mm OD 19mm ID - 316LN (2D) Tapped Fixed Bored CF FlangeSKU: CF34T-19-LN£15.84Fixed bored Conflat flange (CF) are available in the full range of sizes. The smaller range of flange can accept a number of different standard tube sizes. These are prepared ready for welding onto chamber tubulations or components. -
70mm OD 41mm ID - 316LN (2D) Fixed Bored CF FlangeSKU: CF70-41-LN£29.65Fixed bored Conflat flange (CF) are available in the full range of sizes. The smaller range of flange can accept a number of different standard tube sizes. These are prepared ready for welding onto chamber tubulations or components. -
70mm OD 41mm ID - 316LN (2D) Tapped Fixed Bored CF FlangeSKU: CF70T-41-LN4 to 6 weeks delivery£26.04Fixed bored Conflat flange (CF) are available in the full range of sizes. The smaller range of flange can accept a number of different standard tube sizes. These are prepared ready for welding onto chamber tubulations or components. -
114mm OD 70mm ID - 316LN (2D) Fixed Bored CF FlangeSKU: CF114-70-LN£123.03Fixed bored Conflat flange (CF) are available in the full range of sizes. The smaller range of flange can accept a number of different standard tube sizes. These are prepared ready for welding onto chamber tubulations or components. -
152mm OD 102mm ID - 316LN (2D) Fixed Bored CF Flange2D)SKU: CF152-102-LN4 to 6 weeks delivery£251.64Fixed bored Conflat flange (CF) are available in the full range of sizes. The smaller range of flange can accept a number of different standard tube sizes. These are prepared ready for welding onto chamber tubulations or components. -
152mm OD 102mm ID - 316LN (2D) Tapped Fixed Bored CF FlangeSKU: CF152T-102-LN4 to 6 weeks delivery£168.17Fixed bored Conflat flange (CF) are available in the full range of sizes. The smaller range of flange can accept a number of different standard tube sizes. These are prepared ready for welding onto chamber tubulations or components. -
203mm OD 153mm ID - 316LN (2D) Fixed Bored CF FlangeSKU: CF203-153-LN£262.83Fixed bored Conflat flange (CF) are available in the full range of sizes. The smaller range of flange can accept a number of different standard tube sizes. These are prepared ready for welding onto chamber tubulations or components. -
203mm OD 153mm ID - 316LN (2D) Tapped Fixed Bored CF FlangeSKU: CF203T-153-LN4 to 6 weeks delivery£483.49Fixed bored Conflat flange (CF) are available in the full range of sizes. The smaller range of flange can accept a number of different standard tube sizes. These are prepared ready for welding onto chamber tubulations or components. -
34mm OD - 316LN (2D) Blank CF FlangeSKU: CFR34-LN4 to 6 weeks delivery£28.49Rotatable blank Conflat flange (CF) consists of two parts, the inner knife edge detail and the outer bolt hole retaining ring which rotates around the inner part. This allows the boltholes to align to mating flanges in any orientation. These are used to blank off unused chamber ports for leak-tight assembly, also allowing End User machining for non standard tube sizes or components. -
70mm OD - 316LN (2D) Rotable Blank CF FlangeSKU: CFR70-LN4 to 6 weeks delivery£64.08Rotatable blank Conflat flange (CF) consists of two parts, the inner knife edge detail and the outer bolt hole retaining ring which rotates around the inner part. This allows the boltholes to align to mating flanges in any orientation. These are used to blank off unused chamber ports for leak-tight assembly, also allowing End User machining for non standard tube sizes or components. -
114mm OD - 316LN (2D) Rotable Blank CF FlangeSKU: CFR114-LN£213.12Rotatable blank Conflat flange (CF) consists of two parts, the inner knife edge detail and the outer bolt hole retaining ring which rotates around the inner part. This allows the boltholes to align to mating flanges in any orientation. These are used to blank off unused chamber ports for leak-tight assembly, also allowing End User machining for non standard tube sizes or components.