The store will not work correctly in the case when cookies are disabled.
Drive Screw Assembly for LTM150
£2,312.84
Quick Overview Drive Screw Assembly for LTM150
More Information| Flange Size | 70mm |
|---|
| Upgrades | No |
|---|
| Drive Type | Manual |
|---|
| Linear Transfer Mechanism (LTM) |
| DN Type | Flange OD mm | Travel mm | Operation | A Extended mm | A Compressed mm | B Extended mm | B Compressed mm | Shipping Weight (kg) | Part Code | Available In Stock |
| DN40 | 70 Tapped | 25 | Manual | 63 | 38 | 159 | 134 | 3.2 | ZLTM25 | |
| DN40 | 70 Tapped | 50 | Manual | 92 | 42 | 215 | 165 | 3.4 | ZLTM50 | Yes |
| DN40 | 70 Tapped | 75 | Manual | 125 | 50 | 258 | 183 | 3.8 | ZLTM75 | Yes |
| DN40 | 70 Tapped | 100 | Manual | 163 | 63 | 310 | 210 | 4.2 | ZLTM100 | Yes |
| DN40 | 70 Tapped | 150 | Manual | 215 | 65 | 434 | 284 | 4.6 | ZLTM150 | Yes |
| Linear Transfer Mechanism with Stepper Motor |
| DN Type | Flange OD mm | Travel mm | Operation | A Extended mm | A Compressed mm | B Extended mm | B Compressed mm | Shipping Weight (kg) | Part Code | Available In Stock |
| DN40 | 70 Tapped | 25 | Stepper motor(1) | 63 | 38 | 162 | 137 | | ZLTM25W | |
| DN40 | 70 Tapped | 50 | Stepper motor(1) | 92 | 42 | 218 | 168 | | ZLTM50W | |
| DN40 | 70 Tapped | 75 | Stepper motor(1) | 125 | 50 | 261 | 186 | | ZLTM75W | |
| DN40 | 70 Tapped | 100 | Stepper motor(1) | 163 | 63 | 313 | 213 | | ZLTM100W | |
| DN40 | 70 Tapped | 150 | Stepper motor(1) | 215 | 65 | 437 | 287 | | ZLTM150W | |
| (1) Motor Included |
| Linear Transfer Mechanism with Encoder |
| DN Type | Flange OD mm | Travel mm | Operation | A Extended mm | A Compressed mm | B Extended mm | B Compressed mm | Shipping Weight (kg) | Part Code | Available In Stock |
| DN40 | 70 Tapped | 25 | Stepper with encoder | 63 | 38 | 162 | 137 | | ZLTM25ME | |
| DN40 | 70 Tapped | 50 | Stepper with encoder | 92 | 42 | 218 | 168 | | ZLTM50ME | |
| DN40 | 70 Tapped | 75 | Stepper with encoder | 125 | 50 | 261 | 186 | | ZLTM75ME | |
| DN40 | 70 Tapped | 100 | Stepper with encoder | 163 | 63 | 313 | 213 | | ZLTM100ME | |
| DN40 | 70 Tapped | 150 | Stepper with encoder | 215 | 65 | 437 | 287 | | ZLTM150ME | |
Accessories and Kits
|
| Product | Part code |
| Lubrication Kit | ZLUBEK |
| Technical Data Table (LTM) |
| Flange Size | DN40, M6 tapped |
| Bore | 38mm Clear Bore |
| Travel range | 25mm to 150mm |
| Motion control | Manual, Stepper Motor, Encoded Stepper Motor, DC Motor |
| Operating Pressure Range | 1 bar to 10-11 mbar |
| Leak rate | 1x10-10 mbar ls-1 |
| Operating Temperature Range | -20°C to +200°C |
| Baking Temperature | 250°C after removing motors, if fitted |
| Torque required to elevate | 1.2Nm |
| Maximum Axial load | 200N |
| Maximum Radial load | 50N |
| Parallelism of flange faces | <0.04 mm |
