UHV Wobble Sticks
Wobble sticks enable simple hand operated movements to be transmitted through the wall of the vacuum vessel. All our wobble sticks are mounted onto a 70mm OD flange and are capable of being baked without dismantling.
Ideally located at all interchange points in the vacuum system, where a sample must be transferred for example, between a transport device and a sample holder. Wobble sticks can also be used as actuators to operate mechanisms inside the vacuum system, for example probe adjustment, variable orifices or apertures.
The Range
WS Flag
Key Features
- Travel 120-270mm
- ±22° Angular Movement
- 70mm OD CF Mounting Flange
- 18mm Flag Sample
MH Series
Key Features
- Travel 80-280mm
- ±22° Angular Movement and Continuous Rotation
- 70mm OD CF Mounting Flange
- 18mm Flag Sample & Plain Jaws Available
PG Pincer
Key Features
- Travel 80-280mm
- ±22° Angular Movement
- 70mm OD CF Mounting Flange
- 14mm Disk Sample
WH Hollow
Key Features
- Travel 80-280mm
- ±22° Angular Movement
- 70mm OD CF Mounting Flange
- 34mm OD CF Travelling Flange
WS Conventional
Key Features
- Travel 80-280mm
- ±22° Angular Movement
- 70mm OD CF Mounting Flange
- No Jaw Assembly
WS20 Basic
Key Features
- Travel 20mm
- ±7.5° Angular Movement
- 70mm OD CF Mounting Flange
- Basic Travel
UHV Wobble Stick Applications
Here are just a selection of the various real applications of wobble sticks:
Sample Transfers
VACGEN's wobble sticks facilitate effortless sample transfers between transport devices and sample holders, ensuring delicate samples are handled with precision and care.
Probe Adjustments
Ideal for probe adjustments within vacuum chambers, our wobble sticks act as reliable actuators, allowing scientists and researchers to fine-tune their experimental setups with ease.
Access To Tight Spaces
The wobble stick's design allows it to access tight or confined spaces within the vacuum chamber, where direct manual manipulation might be challenging.