Search results for: 'leak potatoes out after slicimg style good to eft'

Instrumentation feedthroughs are used to carry electrical signals (Including Thermocouple) which are normally low current and/or voltage. These feedthroughs are available in multi pin versions on either 34mm or 70mm OD flanges. These also come with the option of a European voltage compliant connectors

All metal Leak Valves with Mallory® sealing pad which offers a superior seal compared to a sapphire seat which can crack causing system vacuum failure. These are recommended for repeatable precise control the flow of gas and these are the preferred choice for system builders who need a reliable cost effective ultra-fine gas inlet control. For service and calibration please see product videos or visit https://vacgen.com/operating-instructions

DPRF Spares

RP100 spares

All metal Leak Valves with Mallory® sealing pad which offers a superior seal compared to a sapphire seat which can crack causing system vacuum failure. These are recommended for repeatable precise control the flow of gas and these are the preferred choice for system builders who need a reliable cost effective ultra-fine gas inlet control.

All metal miniature leak valve with nickel sealing disc. These are used for course control flow of gas into a vacuum system from an external source and operates to 1x10-9 mbar pressure range.

Spares for all metal valves

Spares for all metal valves

Spares for all metal valves

Calcium fluoride viewports are offered in CF flange styles. The UHV CF versions are offered using 304L stainless steel flanges.

Liquid feedthroughs are used to transfer fluids or gases through a Conflat flange into, or out of, a vacuum system. The LFT feedthroughs comprise of stainless steel tubes, terminating in a UHV leak tight connection on the vacuum side, using a copper gasket. The mating part of the connector is supplied, so you can weld you existing pipe work this, to make a UHV leak tight connection.

Liquid feedthroughs are used to transfer fluids or gases through a Conflat flange into, or out of, a vacuum system. The LFT feedthroughs comprise of stainless steel tubes, terminating in a UHV leak tight connection on the vacuum side, using a copper gasket. The mating part of the connector is supplied, so you can weld you existing pipe work this, to make a UHV leak tight connection.

Right angle all metal valve, offering good conductance. The CR series comes with two body types, fully welded CR series or demountable CRD series.

The VACGEN Hemisphere Bell Chamber can be manufactured from metals such as the high permeability material Nickel-Iron Alloy or Stainless Steel 316L and is suitable for applications such as Preperation or Surface Analysis.

A zero length viewport has a thickness no larger than that of its mounting flange. This makes it easier to protect from accidental damage. It provides the best angle of view as there are no tubulation walls to restrict observation. Kodial viewports are offered in CF flange styles. The viewports comprise borosilicate glass optic which is sealed to a Kovar weld ring using an induction heater process. The optic assemblies are helium leak tested and cleaned for ultra high vacuum (UHV) conditions.

A zero length viewport has a thickness no larger than that of its mounting flange. This makes it easier to protect from accidental damage. It provides the best angle of view as there are no tubulation walls to restrict observation. Kodial viewports are offered in CF flange styles. The viewports comprise borosilicate glass optic which is sealed to a Kovar weld ring using an induction heater process. The optic assemblies are helium leak tested and cleaned for ultra high vacuum (UHV) conditions.

A zero length viewport has a thickness no larger than that of its mounting flange. This makes it easier to protect from accidental damage. It provides the best angle of view as there are no tubulation walls to restrict observation. Kodial viewports are offered in CF flange styles. The viewports comprise borosilicate glass optic which is sealed to a Kovar weld ring using an induction heater process. The optic assemblies are helium leak tested and cleaned for ultra high vacuum (UHV) conditions.

A zero length viewport has a thickness no larger than that of its mounting flange. This makes it easier to protect from accidental damage. It provides the best angle of view as there are no tubulation walls to restrict observation. Kodial viewports are offered in CF flange styles. The viewports comprise borosilicate glass optic which is sealed to a Kovar weld ring using an induction heater process. The optic assemblies are helium leak tested and cleaned for ultra high vacuum (UHV) conditions.

A zero length viewport has a thickness no larger than that of its mounting flange. This makes it easier to protect from accidental damage. It provides the best angle of view as there are no tubulation walls to restrict observation. Kodial viewports are offered in CF flange styles. The viewports comprise borosilicate glass optic which is sealed to a Kovar weld ring using an induction heater process. The optic assemblies are helium leak tested and cleaned for ultra high vacuum (UHV) conditions.

A zero length viewport has a thickness no larger than that of its mounting flange. This makes it easier to protect from accidental damage. It provides the best angle of view as there are no tubulation walls to restrict observation. Kodial viewports are offered in CF flange styles. The viewports comprise borosilicate glass optic which is sealed to a Kovar weld ring using an induction heater process. The optic assemblies are helium leak tested and cleaned for ultra high vacuum (UHV) conditions.

A zero length viewport has a thickness no larger than that of its mounting flange. This makes it easier to protect from accidental damage. It provides the best angle of view as there are no tubulation walls to restrict observation. Kodial viewports are offered in CF flange styles. The viewports comprise borosilicate glass optic which is sealed to a Kovar weld ring using an induction heater process. The optic assemblies are helium leak tested and cleaned for ultra high vacuum (UHV) conditions.

A zero length viewport has a thickness no larger than that of its mounting flange. This makes it easier to protect from accidental damage. It provides the best angle of view as there are no tubulation walls to restrict observation. Kodial viewports are offered in CF flange styles. The viewports comprise borosilicate glass optic which is sealed to a Kovar weld ring using an induction heater process. The optic assemblies are helium leak tested and cleaned for ultra high vacuum (UHV) conditions.

A zero length viewport has a thickness no larger than that of its mounting flange. This makes it easier to protect from accidental damage. It provides the best angle of view as there are no tubulation walls to restrict observation. Kodial viewports are offered in CF flange styles. The viewports comprise borosilicate glass optic which is sealed to a Kovar weld ring using an induction heater process. The optic assemblies are helium leak tested and cleaned for ultra high vacuum (UHV) conditions.

A zero length viewport has a thickness no larger than that of its mounting flange. This makes it easier to protect from accidental damage. It provides the best angle of view as there are no tubulation walls to restrict observation. Kodial viewports are offered in CF flange styles. The viewports comprise borosilicate glass optic which is sealed to a Kovar weld ring using an induction heater process. The optic assemblies are helium leak tested and cleaned for ultra high vacuum (UHV) conditions.

A standardised range of UHV chambers have been manufactured for your convenience. The configurable range of skeletons come as standard in either Stainless Steel or Nickel Based Super Alloy.

Right angle all metal valve, offering good conductance. The CR series comes with two body types, fully welded CR series or demountable CRD series.

Right angle all metal valve, offering good conductance. The CR series comes with two body types, fully welded CR series or demountable CRD series.

Right angle all metal valve, offering good conductance. The CR series comes with two body types, fully welded CR series or demountable CRD series.

Right angle all metal valve, offering good conductance. The CR series comes with two body types, fully welded CR series or demountable CRD series.

Right angle all metal valve, offering good conductance. The CR series comes with two body types, fully welded CR series or demountable CRD series.

This jaw assembly is a plain style jaw, for flag style transfer please contact sales@vacgen.com. A flag detail is required in the end of the jaw to accommodate flag transfer. Mechanical hands are used for transferring a sample where linear, angular and rotary movement is required. The pistol grip which actuates the movement and the use of edge welded bellows, gives the user a true 'feeling' of position inside the vacuum chamber to give a controlled transfer. These can be supplied with or…

This jaw assembly is a plain style jaw, for flag style transfer please contact sales@vacgen.com. A flag detail is required in the end of the jaw to accommodate flag transfer. Mechanical hands are used for transferring a sample where linear, angular and rotary movement is required. The pistol grip which actuates the movement and the use of edge welded bellows, gives the user a true 'feeling' of position inside the vacuum chamber to give a controlled transfer. These can be supplied with or…

Calcium fluoride viewports are offered in CF flange styles. The UHV CF versions are offered using 304L stainless steel flanges.

IGC5 is an Ion gauge which combines the functionality of several vacuum system controllers into a single easy to use unit, reducing hardware, wiring and cost. The IGC5 combines the latest microprocessor technology in a 19" 1U rack mount unit, which is very stability and reliability. The IGC5 also offers Bake Out and Pirani Gauge option as standard.

IGC5 is an Ion gauge which combines the functionality of several vacuum system controllers into a single easy to use unit, reducing hardware, wiring and cost. The IGC5 combines the latest microprocessor technology in a 19" 1U rack mount unit, which is very stability and reliability. The IGC5 also offers Bake Out and Pirani Gauge option as standard.

IGC5 is an Ion gauge which combines the functionality of several vacuum system controllers into a single easy to use unit, reducing hardware, wiring and cost. The IGC5 combines the latest microprocessor technology in a 19" 1U rack mount unit, which is very stability and reliability. The IGC5 also offers Bake Out and Pirani Gauge option as standard.

IGC5 is an Ion gauge which combines the functionality of several vacuum system controllers into a single easy to use unit, reducing hardware, wiring and cost. The IGC5 combines the latest microprocessor technology in a 19" 1U rack mount unit, which is very stability and reliability. The IGC5 also offers Bake Out and Pirani Gauge option as standard.

A zero length viewport has a thickness no larger than that of its mounting flange. It provides a wide angle viewing window for your vacuum chamber as there are no tubulation walls to restrict observation. Manufactured using high purity fused silica quartz.

IGC5 is an Ion gauge which combines the functionality of several vacuum system controllers into a single easy to use unit, reducing hardware, wiring and cost. The IGC5 combines the latest microprocessor technology in a 19" 1U rack mount unit, which is very stability and reliability. The IGC5 also offers Bake Out and Pirani Gauge option as standard.

IGC5 is an Ion gauge which combines the functionality of several vacuum system controllers into a single easy to use unit, reducing hardware, wiring and cost. The IGC5 combines the latest microprocessor technology in a 19" 1U rack mount unit, which is very stability and reliability. The IGC5 also offers Bake Out and Pirani Gauge option as standard.

IGC5 is an Ion gauge which combines the functionality of several vacuum system controllers into a single easy to use unit, reducing hardware, wiring and cost. The IGC5 combines the latest microprocessor technology in a 19" 1U rack mount unit, which is very stability and reliability. The IGC5 also offers Bake Out and Pirani Gauge option as standard.

IGC5 is an Ion gauge which combines the functionality of several vacuum system controllers into a single easy to use unit, reducing hardware, wiring and cost. The IGC5 combines the latest microprocessor technology in a 19" 1U rack mount unit, which is very stability and reliability. The IGC5 also offers Bake Out and Pirani Gauge option as standard. Use from < Serial # 008800.

The Titanium Sublimation Pump is a true UHV pump. It is used to supplement the pumping action of other UHV pumps, (normally Ion Pumps) as it can be more effective at pumping certain gases. The main advantages of this type of pump is, it is a simple, low cost solution, that gives you high pumping speeds.

Motor Controller will suit all the standard motorisation offer by VACGEN. This is a rack mounted 3U 1/3rd single axis controller with a robust long life design. This comes with a simple software package, which when purchased with a motorised component, will be a plug and play out of the box. The unit can be used in either open or closed loop (Encoder) configuration. We also offer a full range of cables and optional extras.

Motor Controller will suit all the standard motorisation offer by VACGEN. This is a rack mounted 3U 1/3rd single axis controller with a robust long life design. This comes with a simple software package, which when purchased with a motorised component, will be a plug and play out of the box. The unit can be used in either open or closed loop (Encoder) configuration. We also offer a full range of cables and optional extras.

Motor Controller will suit all the standard motorisation offer by VACGEN. This is a rack mounted 3U 1/3rd single axis controller with a robust long life design. This comes with a simple software package, which when purchased with a motorised component, will be a plug and play out of the box. The unit can be used in either open or closed loop (Encoder) configuration. We also offer a full range of cables and optional extras.

Motor Controller will suit all the standard motorisation offer by VACGEN. This is a rack mounted 3U 1/3rd single axis controller with a robust long life design. This comes with a simple software package, which when purchased with a motorised component, will be a plug and play out of the box. The unit can be used in either open or closed loop (Encoder) configuration. We also offer a full range of cables and optional extras.

Motor Controller will suit all the standard motorisation offer by VACGEN. This is a rack mounted 3U 1/3rd single axis controller with a robust long life design. This comes with a simple software package, which when purchased with a motorised component, will be a plug and play out of the box. The unit can be used in either open or closed loop (Encoder) configuration. We also offer a full range of cables and optional extras.

Motor Controller will suit all the standard motorisation offer by VACGEN. This is a rack mounted 3U 1/3rd single axis controller with a robust long life design. This comes with a simple software package, which when purchased with a motorised component, will be a plug and play out of the box. The unit can be used in either open or closed loop (Encoder) configuration. We also offer a full range of cables and optional extras.

Motor Controller will suit all the standard motorisation offer by VACGEN. This is a rack mounted 3U 1/3rd single axis controller with a robust long life design. This comes with a simple software package, which when purchased with a motorised component, will be a plug and play out of the box. The unit can be used in either open or closed loop (Encoder) configuration. We also offer a full range of cables and optional extras.

Motor Controller will suit all the standard motorisation offer by VACGEN. This is a rack mounted 3U 1/3rd single axis controller with a robust long life design. This comes with a simple software package, which when purchased with a motorised component, will be a plug and play out of the box. The unit can be used in either open or closed loop (Encoder) configuration. We also offer a full range of cables and optional extras.

Motor Controller will suit all the standard motorisation offer by VACGEN. This is a rack mounted 3U 1/3rd single axis controller with a robust long life design. This comes with a simple software package, which when purchased with a motorised component, will be a plug and play out of the box. The unit can be used in either open or closed loop (Encoder) configuration. We also offer a full range of cables and optional extras.

Motor Controller will suit all the standard motorisation offer by VACGEN. This is a rack mounted 3U 1/3rd single axis controller with a robust long life design. This comes with a simple software package, which when purchased with a motorised component, will be a plug and play out of the box. The unit can be used in either open or closed loop (Encoder) configuration. We also offer a full range of cables and optional extras.

Motor Controller will suit all the standard motorisation offer by VACGEN. This is a rack mounted 3U 1/3rd single axis controller with a robust long life design. This comes with a simple software package, which when purchased with a motorised component, will be a plug and play out of the box. The unit can be used in either open or closed loop (Encoder) configuration. We also offer a full range of cables and optional extras.

Motor Controller will suit all the standard motorisation offer by VACGEN. This is a rack mounted 3U 1/3rd single axis controller with a robust long life design. This comes with a simple software package, which when purchased with a motorised component, will be a plug and play out of the box. The unit can be used in either open or closed loop (Encoder) configuration. We also offer a full range of cables and optional extras.

Motor Controller will suit all the standard motorisation offer by VACGEN. This is a rack mounted 3U 1/3rd single axis controller with a robust long life design. This comes with a simple software package, which when purchased with a motorised component, will be a plug and play out of the box. The unit can be used in either open or closed loop (Encoder) configuration. We also offer a full range of cables and optional extras.

Motor Controller will suit all the standard motorisation offer by VACGEN. This is a rack mounted 3U 1/3rd single axis controller with a robust long life design. This comes with a simple software package, which when purchased with a motorised component, will be a plug and play out of the box. The unit can be used in either open or closed loop (Encoder) configuration. We also offer a full range of cables and optional extras.

Motor Controller will suit all the standard motorisation offer by VACGEN. This is a rack mounted 3U 1/3rd single axis controller with a robust long life design. This comes with a simple software package, which when purchased with a motorised component, will be a plug and play out of the box. The unit can be used in either open or closed loop (Encoder) configuration. We also offer a full range of cables and optional extras.

Motor Controller will suit all the standard motorisation offer by VACGEN. This is a rack mounted 3U 1/3rd single axis controller with a robust long life design. This comes with a simple software package, which when purchased with a motorised component, will be a plug and play out of the box. The unit can be used in either open or closed loop (Encoder) configuration. We also offer a full range of cables and optional extras.

Motor Controller will suit all the standard motorisation offer by VACGEN. This is a rack mounted 3U 1/3rd single axis controller with a robust long life design. This comes with a simple software package, which when purchased with a motorised component, will be a plug and play out of the box. The unit can be used in either open or closed loop (Encoder) configuration. We also offer a full range of cables and optional extras.