Search results for: 'leak potatoes out after slicimg style good to eat'

RP100 spares

A zero length viewport has a thickness no larger than that of its mounting flange. This makes it easier to protect from accidental damage. It provides the best angle of view as there are no tubulation walls to restrict observation. Kodial viewports are offered in CF flange styles. The viewports comprise borosilicate glass optic which is sealed to a Kovar weld ring using an induction heater process. The optic assemblies are helium leak tested and cleaned for ultra high vacuum (UHV) conditions.

A zero length viewport has a thickness no larger than that of its mounting flange. This makes it easier to protect from accidental damage. It provides the best angle of view as there are no tubulation walls to restrict observation. Kodial viewports are offered in CF flange styles. The viewports comprise borosilicate glass optic which is sealed to a Kovar weld ring using an induction heater process. The optic assemblies are helium leak tested and cleaned for ultra high vacuum (UHV) conditions.

Super clean ultra high quality oxygen free annealed copper gaskets for lower tightening torque to make a UHV leak tight seal. These are rumbled to remove all the burrs, UHV cleaned and individually packed. Recommended for use where you are using zero length viewports and fragile ceramic feedthroughs.

Fixed blank Conflat flange (CF) are available in the full range of sizes. These are used to blank off unused chamber ports for leak-tight assembly, also allowing End User machining for non standard tube sizes or components.

Fixed blank Conflat flange (CF) are available in the full range of sizes. These are used to blank off unused chamber ports for leak-tight assembly, also allowing End User machining for non standard tube sizes or components.

Fixed blank Conflat flange (CF) are available in the full range of sizes. These are used to blank off unused chamber ports for leak-tight assembly, also allowing End User machining for non standard tube sizes or components.

Rotatable blank Conflat flange (CF) consists of two parts, the inner knife edge detail and the outer bolt hole retaining ring which rotates around the inner part. This allows the boltholes to align to mating flanges in any orientation. These are used to blank off unused chamber ports for leak-tight assembly, also allowing End User machining for non standard tube sizes or components.

Rotatable blank Conflat flange (CF) consists of two parts, the inner knife edge detail and the outer bolt hole retaining ring which rotates around the inner part. This allows the boltholes to align to mating flanges in any orientation. These are used to blank off unused chamber ports for leak-tight assembly, also allowing End User machining for non standard tube sizes or components.

Straight Connector with one fixed flange and the other is rotatable, enabling the connection in any orientation of the vacuum equipment.

Flange with tubulation enabling welding without risking conflat knife edge damage. Specifically designed and manufactured for vacuum system designers and manufacturers of vacuum components.

Flange with tubulation enabling welding without risking conflat knife edge damage. Specifically designed and manufactured for vacuum system designers and manufacturers of vacuum components.

HD range of fast entry lock doors can be used to load items into a prep chamber. The door is sealed by a reusable Viton® O-ring. This is an ideal solution for keeping the main system under UHV conditions via a gate valve between the load lock and system.

90° Radius elbows, on each axis, one of the flanges is fixed and the other is rotatable. The fixed flange comes in two versions of bolt hole orientation, inline or straddled configuration, enabling the connection in any orientation of the vacuum equipment.

HD range of fast entry lock doors can be used to load items into a prep chamber. The door is sealed by a reusable Viton® O-ring. This is an ideal solution for keeping the main system under UHV conditions via a gate valve between the load lock and system.

The Miniax XYZ translator offers a source of simple, cost effective, manipulation. The single bellows construction makes it easy to use in any orientation. The micrometers are vacuum conditioned and do not need to be removed for bakeout.

The Miniax XYZ translator offers a source of simple, cost effective, manipulation. The single bellows construction makes it easy to use in any orientation. The micrometers are vacuum conditioned and do not need to be removed for bakeout.

Three way "T" with flanges equally spaced at 90° to each other. On each axis, one of the flanges is fixed and the other is rotatable. The fixed flange comes with two versions of bolt hole orientation, inline or straddled configuration, enabling the connection in any orientation of the vacuum equipment.

Three way "T" with flanges equally spaced at 90° to each other. On each axis, one of the flanges is fixed and the other is rotatable. The fixed flange comes with two versions of bolt hole orientation, inline or straddled configuration, enabling the connection in any orientation of the vacuum equipment.

Four way cross with flanges equally spaced at 90° to each other. On each axis, one of the flanges is fixed and the other is rotatable. The fixed flange comes in two versions of bolt hole orientation, inline or straddled configuration, enabling the connection in any orientation of the vacuum equipment.

Four way cross with flanges equally spaced at 90° to each other. On each axis, one of the flanges is fixed and the other is rotatable. The fixed flange comes in two versions of bolt hole orientation, inline or straddled configuration, enabling the connection in any orientation of the vacuum equipment.

Six way cross with flanges equally spaced at 90° to each other. On each axis, one of the flanges is fixed and the other is rotatable. The fixed flange comes in two versions of bolt hole orientation, inline or straddled configuration, enabling the connection in any orientation of the vacuum equipment.

Six way cross with flanges equally spaced at 90° to each other. On each axis, one of the flanges is fixed and the other is rotatable. The fixed flange comes in two versions of bolt hole orientation, inline or straddled configuration, enabling the connection in any orientation of the vacuum equipment.

Precision all metal XYZ translator with single 35mm clear bore bellows, which is bakeable to 230°C. These offer a very stable UHV platform to which our range of sample holders with cooling and heater options can be fitted. On the 152mm base flange, this offer 4 mini ports for electrical and cooling options.

Precision all metal XYZ translator with single 35mm clear bore bellows, which is bakeable to 230°C. These offer a very stable UHV platform to which our range of sample holders with cooling and heater options can be fitted. On the 152mm base flange, this offer 4 mini ports for electrical and cooling options.

Rotatable bored Conflat Flange (CF) are available in the full range of sizes. The smaller range of flange can accept a number of different standard tube sizes. These are prepared ready for welding onto chamber tubulations or components. The rotatable flange consists of two parts, the inner knife edge detail and the outer bolt hole retaining ring which rotates around the inner part.

Rotating platforms require minimal space at only 43mm and offer the means of translating rotation through a vessel wall without losing vacuum integrity, enabling probes such as large Cryostats to be inserted without effect on the chamber pressure. To maintain the rotary seal, two vacuum ports are mounted to the base flange of the assembly allowing connection to an appropriate independent pumps. These have a 55mm clear bore with coarse and fine control available in addition to motorised options.

Precision all metal XYZ translator with dual 32mm clear bore bellows without support tube and 28mm with support tube, which is bakeable to 230°C. These offer an extremely stable UHV platform to which our range of sample holders with cooling and heater options can be fitted. With the support tube fitted, this greatly reduces the risk of the sample holder moving during transfer, owing to the second lower bearing support built into the X&Y table.

Precision all metal XYZ translator with dual 32mm clear bore bellows without support tube and 28mm with support tube, which is bakeable to 230°C. These offer an extremely stable UHV platform to which our range of sample holders with cooling and heater options can be fitted. With the support tube fitted, this greatly reduces the risk of the sample holder moving during transfer, owing to the second lower bearing support built into the X&Y table.

Precision all metal XYZ translator with dual 32mm clear bore bellows without support tube and 28mm with support tube, which is bakeable to 230°C. These offer an extremely stable UHV platform to which our range of sample holders with cooling and heater options can be fitted. With the support tube fitted, this greatly reduces the risk of the sample holder moving during transfer, owing to the second lower bearing support built into the X&Y table.

Precision all metal XYZ translator with dual 32mm clear bore bellows without support tube and 28mm with support tube, which is bakeable to 230°C. These offer an extremely stable UHV platform to which our range of sample holders with cooling and heater options can be fitted. With the support tube fitted, this greatly reduces the risk of the sample holder moving during transfer, owing to the second lower bearing support built into the X&Y table.

Precision all metal XYZ translator with dual 32mm clear bore bellows without support tube and 28mm with support tube, which is bakeable to 230°C. These offer an extremely stable UHV platform to which our range of sample holders with cooling and heater options can be fitted. With the support tube fitted, this greatly reduces the risk of the sample holder moving during transfer, owing to the second lower bearing support built into the X&Y table.

Precision all metal XYZ translator with dual 32mm clear bore bellows without support tube and 28mm with support tube, which is bakeable to 230°C. These offer an extremely stable UHV platform to which our range of sample holders with cooling and heater options can be fitted. With the support tube fitted, this greatly reduces the risk of the sample holder moving during transfer, owing to the second lower bearing support built into the X&Y table.

Rotating platforms require minimal space at only 43mm and offer the means of translating rotation through a vessel wall without losing vacuum integrity, enabling probes such as large Cryostats to be inserted without effect on the chamber pressure. To maintain the rotary seal, two vacuum ports are mounted to the base flange of the assembly allowing connection to an appropriate independent pumps. These have a 55mm clear bore with coarse and fine control available in addition to motorised options.

Rotating platforms require minimal space at only 43mm and offer the means of translating rotation through a vessel wall without losing vacuum integrity, enabling probes such as large Cryostats to be inserted without effect on the chamber pressure. To maintain the rotary seal, two vacuum ports are mounted to the base flange of the assembly allowing connection to an appropriate independent pumps. These have a 55mm clear bore with coarse and fine control available in addition to motorised options.

Rotating platforms require minimal space at only 43mm and offer the means of translating rotation through a vessel wall without losing vacuum integrity, enabling probes such as large Cryostats to be inserted without effect on the chamber pressure. To maintain the rotary seal, two vacuum ports are mounted to the base flange of the assembly allowing connection to an appropriate independent pumps. These have a 55mm clear bore with coarse and fine control available in addition to motorised options.

Viton® gaskets are used in HV applications with low bakeout temperatures (

Heavy duty high precision Rack & Pinion linear travel with optional rotation, with both axis controlled by rotatory drives. The LRP series offers linear only, where rotation is not required, or the RLRP series which offers an independent 360° rotation shaft, for transferring samples with greater accuracy then the MLD/R series. These use UHV accepted metals within its construction. The probes have a front bearing housing supporting the shaft, which offers higher accuracy over the MLRV probe for…

Heavy duty high precision Rack & Pinion linear travel with optional rotation, with both axis controlled by rotatory drives. The LRP series offers linear only, where rotation is not required, or the RLRP series which offers an independent 360° rotation shaft, for transferring samples with greater accuracy then the MLD/R series. These use UHV accepted metals within its construction. The probes have a front bearing housing supporting the shaft, which offers higher accuracy over the MLRV probe for…

High quality oxygen-free copper gaskets for university and commercial use. These are rumbled to remove all the burrs, UHV cleaned and individually packed. Designed for UHV applications where high usage or bulk purchase pricing is required.

Super clean ultra high quality oxygen free Silver plated gasket. These are rumbled to remove all the burrs, etched to remove surface skin prior to silver plating, UHV cleaned and individually packed. Completely free from any nickel flash base coat. Recommended for use in HV & UHV systems where the vacuum environment could oxidise a plain copper gasket.

Zero Length Adaptor conflat Flange (CF) are used to adapt from one flange size to another. The larger flange OD has through bolt holes enabling ordinary nut and bolt to be used. The smaller flange OD has metric tapped holes. This connects different sizes of flanges where there is limited space and does not increase the chamber volume.

Zero Length Adaptor conflat Flange (CF) are used to adapt from one flange size to another. The larger flange OD has through bolt holes enabling ordinary nut and bolt to be used. The smaller flange OD has metric tapped holes. This connects different sizes of flanges where there is limited space and does not increase the chamber volume.

Zero Length Adaptor conflat Flange (CF) are used to adapt from one flange size to another. The larger flange OD has through bolt holes enabling ordinary nut and bolt to be used. The smaller flange OD has metric tapped holes. This connects different sizes of flanges where there is limited space and does not increase the chamber volume.

Fixed bored Conflat flange (CF) are available in the full range of sizes. The smaller range of flange can accept a number of different standard tube sizes. These are prepared ready for welding onto chamber tubulations or components.

Fixed bored Conflat flange (CF) are available in the full range of sizes. The smaller range of flange can accept a number of different standard tube sizes. These are prepared ready for welding onto chamber tubulations or components.

Fixed bored Conflat flange (CF) are available in the full range of sizes. The smaller range of flange can accept a number of different standard tube sizes. These are prepared ready for welding onto chamber tubulations or components.

Fixed bored Conflat flange (CF) are available in the full range of sizes. The smaller range of flange can accept a number of different standard tube sizes. These are prepared ready for welding onto chamber tubulations or components.

Rotatable bored Conflat Flange (CF) are available in the full range of sizes. The smaller range of flange can accept a number of different standard tube sizes. These are prepared ready for welding onto chamber tubulations or components. The rotatable flange consists of two parts, the inner knife edge detail and the outer bolt hole retaining ring which rotates around the inner part.

Rotatable bored Conflat Flange (CF) are available in the full range of sizes. The smaller range of flange can accept a number of different standard tube sizes. These are prepared ready for welding onto chamber tubulations or components. The rotatable flange consists of two parts, the inner knife edge detail and the outer bolt hole retaining ring which rotates around the inner part.

Precision all metal XYZ translator with single 35mm clear bore bellows, which is bakeable to 230°C. These offer a very stable UHV platform to which our range of sample holders with cooling and heater options can be fitted. On the 152mm base flange, this offer 4 mini ports for electrical and cooling options.

Precision all metal XYZ translator with single 35mm clear bore bellows, which is bakeable to 230°C. These offer a very stable UHV platform to which our range of sample holders with cooling and heater options can be fitted. On the 152mm base flange, this offer 4 mini ports for electrical and cooling options.