Search results for: 'leak potatoes out after slicimg still good to eat'

A zero length viewport has a thickness no larger than that of its mounting flange. This makes it easier to protect from accidental damage. It provides the best angle of view as there are no tubulation walls to restrict observation. Kodial viewports are offered in CF flange styles. The viewports comprise borosilicate glass optic which is sealed to a Kovar weld ring using an induction heater process. The optic assemblies are helium leak tested and cleaned for ultra high vacuum (UHV) conditions.

A zero length viewport has a thickness no larger than that of its mounting flange. This makes it easier to protect from accidental damage. It provides the best angle of view as there are no tubulation walls to restrict observation. Kodial viewports are offered in CF flange styles. The viewports comprise borosilicate glass optic which is sealed to a Kovar weld ring using an induction heater process. The optic assemblies are helium leak tested and cleaned for ultra high vacuum (UHV) conditions.

Super clean ultra high quality oxygen free annealed copper gaskets for lower tightening torque to make a UHV leak tight seal. These are rumbled to remove all the burrs, UHV cleaned and individually packed. Recommended for use where you are using zero length viewports and fragile ceramic feedthroughs.

Fixed blank Conflat flange (CF) are available in the full range of sizes. These are used to blank off unused chamber ports for leak-tight assembly, also allowing End User machining for non standard tube sizes or components.

Fixed blank Conflat flange (CF) are available in the full range of sizes. These are used to blank off unused chamber ports for leak-tight assembly, also allowing End User machining for non standard tube sizes or components.

Fixed blank Conflat flange (CF) are available in the full range of sizes. These are used to blank off unused chamber ports for leak-tight assembly, also allowing End User machining for non standard tube sizes or components.

Fixed blank Conflat flange (CF) are available in the full range of sizes. These are used to blank off unused chamber ports for leak-tight assembly, also allowing End User machining for non standard tube sizes or components.

Rotatable blank Conflat flange (CF) consists of two parts, the inner knife edge detail and the outer bolt hole retaining ring which rotates around the inner part. This allows the boltholes to align to mating flanges in any orientation. These are used to blank off unused chamber ports for leak-tight assembly, also allowing End User machining for non standard tube sizes or components.

Rotatable blank Conflat flange (CF) consists of two parts, the inner knife edge detail and the outer bolt hole retaining ring which rotates around the inner part. This allows the boltholes to align to mating flanges in any orientation. These are used to blank off unused chamber ports for leak-tight assembly, also allowing End User machining for non standard tube sizes or components.

Flange with tubulation enabling welding without risking conflat knife edge damage. Specifically designed and manufactured for vacuum system designers and manufacturers of vacuum components.

Flange with tubulation enabling welding without risking conflat knife edge damage. Specifically designed and manufactured for vacuum system designers and manufacturers of vacuum components.

Straight Connector with one fixed flange and the other is rotatable, enabling the connection in any orientation of the vacuum equipment.

HD range of fast entry lock doors can be used to load items into a prep chamber. The door is sealed by a reusable Viton® O-ring. This is an ideal solution for keeping the main system under UHV conditions via a gate valve between the load lock and system.

HD range of fast entry lock doors can be used to load items into a prep chamber. The door is sealed by a reusable Viton® O-ring. This is an ideal solution for keeping the main system under UHV conditions via a gate valve between the load lock and system.

Three way "T" with flanges equally spaced at 90° to each other. On each axis, one of the flanges is fixed and the other is rotatable. The fixed flange comes with two versions of bolt hole orientation, inline or straddled configuration, enabling the connection in any orientation of the vacuum equipment.

Three way "T" with flanges equally spaced at 90° to each other. On each axis, one of the flanges is fixed and the other is rotatable. The fixed flange comes with two versions of bolt hole orientation, inline or straddled configuration, enabling the connection in any orientation of the vacuum equipment.

Four way cross with flanges equally spaced at 90° to each other. On each axis, one of the flanges is fixed and the other is rotatable. The fixed flange comes in two versions of bolt hole orientation, inline or straddled configuration, enabling the connection in any orientation of the vacuum equipment.

Four way cross with flanges equally spaced at 90° to each other. On each axis, one of the flanges is fixed and the other is rotatable. The fixed flange comes in two versions of bolt hole orientation, inline or straddled configuration, enabling the connection in any orientation of the vacuum equipment.

Six way cross with flanges equally spaced at 90° to each other. On each axis, one of the flanges is fixed and the other is rotatable. The fixed flange comes in two versions of bolt hole orientation, inline or straddled configuration, enabling the connection in any orientation of the vacuum equipment.

Six way cross with flanges equally spaced at 90° to each other. On each axis, one of the flanges is fixed and the other is rotatable. The fixed flange comes in two versions of bolt hole orientation, inline or straddled configuration, enabling the connection in any orientation of the vacuum equipment.

Viton® gaskets are used in HV applications with low bakeout temperatures (

High quality oxygen-free copper gaskets for university and commercial use. These are rumbled to remove all the burrs, UHV cleaned and individually packed. Designed for UHV applications where high usage or bulk purchase pricing is required.

Super clean ultra high quality oxygen free Silver plated gasket. These are rumbled to remove all the burrs, etched to remove surface skin prior to silver plating, UHV cleaned and individually packed. Completely free from any nickel flash base coat. Recommended for use in HV & UHV systems where the vacuum environment could oxidise a plain copper gasket.

Zero Length Adaptor conflat Flange (CF) are used to adapt from one flange size to another. The larger flange OD has through bolt holes enabling ordinary nut and bolt to be used. The smaller flange OD has metric tapped holes. This connects different sizes of flanges where there is limited space and does not increase the chamber volume.

Zero Length Adaptor conflat Flange (CF) are used to adapt from one flange size to another. The larger flange OD has through bolt holes enabling ordinary nut and bolt to be used. The smaller flange OD has metric tapped holes. This connects different sizes of flanges where there is limited space and does not increase the chamber volume.

Zero Length Adaptor conflat Flange (CF) are used to adapt from one flange size to another. The larger flange OD has through bolt holes enabling ordinary nut and bolt to be used. The smaller flange OD has metric tapped holes. This connects different sizes of flanges where there is limited space and does not increase the chamber volume.

Fixed bored Conflat flange (CF) are available in the full range of sizes. The smaller range of flange can accept a number of different standard tube sizes. These are prepared ready for welding onto chamber tubulations or components.

Fixed bored Conflat flange (CF) are available in the full range of sizes. The smaller range of flange can accept a number of different standard tube sizes. These are prepared ready for welding onto chamber tubulations or components.

Fixed bored Conflat flange (CF) are available in the full range of sizes. The smaller range of flange can accept a number of different standard tube sizes. These are prepared ready for welding onto chamber tubulations or components.

Rotatable bored Conflat Flange (CF) are available in the full range of sizes. The smaller range of flange can accept a number of different standard tube sizes. These are prepared ready for welding onto chamber tubulations or components. The rotatable flange consists of two parts, the inner knife edge detail and the outer bolt hole retaining ring which rotates around the inner part.

Rotatable bored Conflat Flange (CF) are available in the full range of sizes. The smaller range of flange can accept a number of different standard tube sizes. These are prepared ready for welding onto chamber tubulations or components. The rotatable flange consists of two parts, the inner knife edge detail and the outer bolt hole retaining ring which rotates around the inner part.

Rotatable bored Conflat Flange (CF) are available in the full range of sizes. The smaller range of flange can accept a number of different standard tube sizes. These are prepared ready for welding onto chamber tubulations or components. The rotatable flange consists of two parts, the inner knife edge detail and the outer bolt hole retaining ring which rotates around the inner part.