Search results for: 'pump pull leak'

Right angle all metal valve, offering good conductance. The CR series comes with two body types, fully welded CR series or demountable CRD series.

Right angle all metal valve, offering good conductance. The CR series comes with two body types, fully welded CR series or demountable CRD series.

Right angle all metal valve, offering good conductance. The CR series comes with two body types, fully welded CR series or demountable CRD series.

The VR valves are right angled general purpose UHV valves with a cycle usage minimum of 100,000 activations. The bonnet (top) seal of the valve is welded on the VR series.

The VR valves are right angled general purpose UHV valves with a cycle usage minimum of 100,000 activations. The bonnet (top) seal of the valve is welded on the VR series.

The MRD91 is a manual or motorised magnetic rotary drive which uses high strength Sm2Co17 magnetic coupling to transfer rotational forces into the vacuum envelope. This is achieved without any dynamic seals or bellows making these devices exceptionally robust and no risk of a vacuum leak for the life of the drive. The MRD91 is fitted with Index scale and position lock.

The MRD6 is a manual or motorised magnetic rotary drive which uses high strength Sm2Co17 magnetic coupling to transfer rotational forces into the vacuum envelope. This is achieved without any dynamic seals or bellows making these devices exceptionally robust and no risk of a vacuum leak for the life of the drive. The MRD6 is fitted with Index scale and position lock.

Right angle all metal valve, offering excellent conductance. The CR series comes with two body types, fully welded CR series or demountable CRD series.

Conductor: 1 x 5 mm dia stainless steel. Power feedthroughs are used to carry either high current, or high voltage, or both.

Instrumentation feedthroughs are used to carry electrical signals (Including Thermocouple) which are normally low current and/or voltage. These feedthroughs are available in multi pin versions on either 34mm or 70mm OD flanges. These also come with the option of a European voltage compliant connectors

Instrumentation feedthroughs are used to carry electrical signals (Including Thermocouple) which are normally low current and/or voltage. These feedthroughs are available in multi pin versions on either 34mm or 70mm OD flanges. These also come with the option of a European voltage compliant connectors