Search results for: 'leak potatoes out after slicimg style good to eat'

Motor Upgrade for RD1, 2 & 7

Allows the precise mechanical alignment for sample transfer and docking systems i.e. MLRV and RLRP. Cost effective way to save time during system installation where sample transfer tools are being set up for the first time.

Allows the precise mechanical alignment for sample transfer and docking systems i.e. MLRV and RLRP. Cost effective way to save time during system installation where sample transfer tools are being set up for the first time.

Straight Connector with one fixed flange and the other is rotatable, enabling the connection in any orientation of the vacuum equipment.

When operating below the Pirani gauge range (10-3 mbar), an ion gauge can be used to measure UHV pressure. VACGEN offer a range of gauge heads and filament materials to cover all vacuum requirements.

When operating below the Pirani gauge range (10-3 mbar), an ion gauge can be used to measure UHV pressure. VACGEN offer a range of gauge heads and filament materials to cover all vacuum requirements.

The RD6 is a manual or motorised precision rotary drive with a 100mm shaft length. The RD6 has low backlash, with a smooth continuous primary rotation via a 9.5 mm diameter shaft.

When operating below the Pirani gauge range (10-3 mbar), an ion gauge can be used to measure UHV pressure. VACGEN offer a range of gauge heads and filament materials to cover all vacuum requirements.

The RD91 is a manual or motorised precision rotary drive, with a 100mm shaft length. The RD91 is fitted with Index scale and position lock. The drive provides a low backlash, with a smooth continuous primary rotation via a 6.35mm diameter shaft.

90° Radius elbows, on each axis, one of the flanges is fixed and the other is rotatable. The fixed flange comes in two versions of bolt hole orientation, inline or straddled configuration, enabling the connection in any orientation of the vacuum equipment.

90° Radius elbows, on each axis, one of the flanges is fixed and the other is rotatable. The fixed flange comes in two versions of bolt hole orientation, inline or straddled configuration, enabling the connection in any orientation of the vacuum equipment.

Flexible connectors are used to compensate for any misalignment between flanges that have to be linked together. On each axis, one of the flanges is fixed and the other is rotatable, enabling the connection in any orientation of the vacuum equipment.

When operating below the Pirani gauge range (10-3 mbar), an ion gauge can be used to measure UHV pressure. VACGEN offer a range of gauge heads and filament materials to cover all vacuum requirements.

HD range of fast entry lock doors can be used to load items into a prep chamber. The door is sealed by a reusable Viton® O-ring. This is an ideal solution for keeping the main system under UHV conditions via a gate valve between the load lock and system.

Instrumentation feedthroughs are used to carry electrical signals (Including Thermocouple) which are normally low current and/or voltage. These feedthroughs are available in multi pin versions on either 34mm or 70mm OD flanges. These also come with the option of a European voltage compliant connectors

A zero length viewport has a thickness no larger than that of its mounting flange. It provides a wide angle viewing window for your vacuum chamber as there are no tubulation walls to restrict observation. Manufactured using high purity fused silica quartz.

The RD6 is a manual or motorised precision rotary drive with a 100mm shaft length. The RD6 has low backlash, with a smooth continuous primary rotation via a 9.5 mm diameter shaft.

90° Radius elbows, on each axis, one of the flanges is fixed and the other is rotatable. The fixed flange comes in two versions of bolt hole orientation, inline or straddled configuration, enabling the connection in any orientation of the vacuum equipment.

90° Radius elbows, on each axis, one of the flanges is fixed and the other is rotatable. The fixed flange comes in two versions of bolt hole orientation, inline or straddled configuration, enabling the connection in any orientation of the vacuum equipment.

90° Radius elbows, on each axis, one of the flanges is fixed and the other is rotatable. The fixed flange comes in two versions of bolt hole orientation, inline or straddled configuration, enabling the connection in any orientation of the vacuum equipment.

HD range of fast entry lock doors can be used to load items into a prep chamber. The door is sealed by a reusable Viton® O-ring. This is an ideal solution for keeping the main system under UHV conditions via a gate valve between the load lock and system.

HD range of fast entry lock doors can be used to load items into a prep chamber. The door is sealed by a reusable Viton® O-ring. This is an ideal solution for keeping the main system under UHV conditions via a gate valve between the load lock and system.

HD range of fast entry lock doors can be used to load items into a prep chamber. The door is sealed by a reusable Viton® O-ring. This is an ideal solution for keeping the main system under UHV conditions via a gate valve between the load lock and system.

HD range of fast entry lock doors can be used to load items into a prep chamber. The door is sealed by a reusable Viton® O-ring. This is an ideal solution for keeping the main system under UHV conditions via a gate valve between the load lock and system.

HD range of fast entry lock doors can be used to load items into a prep chamber. The door is sealed by a reusable Viton® O-ring. This is an ideal solution for keeping the main system under UHV conditions via a gate valve between the load lock and system.

Instrumentation feedthroughs are used to carry electrical signals (Including Thermocouple) which are normally low current and/or voltage. These feedthroughs are available in multi pin versions on either 34mm or 70mm OD flanges. These also come with the option of a European voltage compliant connectors

Instrumentation feedthroughs are used to carry electrical signals (Including Thermocouple) which are normally low current and/or voltage. These feedthroughs are available in multi pin versions on either 34mm or 70mm OD flanges. These also come with the option of a European voltage compliant connectors

Instrumentation feedthroughs are used to carry electrical signals (Including Thermocouple) which are normally low current and/or voltage. These feedthroughs are available in multi pin versions on either 34mm or 70mm OD flanges. These also come with the option of a European voltage compliant connectors

Instrumentation feedthroughs are used to carry electrical signals (Including Thermocouple) which are normally low current and/or voltage. These feedthroughs are available in multi pin versions on either 34mm or 70mm OD flanges. These also come with the option of a European voltage compliant connectors

Instrumentation feedthroughs are used to carry electrical signals (Including Thermocouple) which are normally low current and/or voltage. These feedthroughs are available in multi pin versions on either 34mm or 70mm OD flanges. These also come with the option of a European voltage compliant connectors

Instrumentation feedthroughs are used to carry electrical signals (Including Thermocouple) which are normally low current and/or voltage. These feedthroughs are available in multi pin versions on either 34mm or 70mm OD flanges. These also come with the option of a European voltage compliant connectors

Instrumentation feedthroughs are used to carry electrical signals (Including Thermocouple) which are normally low current and/or voltage. These feedthroughs are available in multi pin versions on either 34mm or 70mm OD flanges. These also come with the option of a European voltage compliant connectors

Instrumentation feedthroughs are used to carry electrical signals (Including Thermocouple) which are normally low current and/or voltage. These feedthroughs are available in multi pin versions on either 34mm or 70mm OD flanges. These also come with the option of a European voltage compliant connectors

Instrumentation feedthroughs are used to carry electrical signals (Including Thermocouple) which are normally low current and/or voltage. These feedthroughs are available in multi pin versions on either 34mm or 70mm OD flanges. These also come with the option of a European voltage compliant connectors

Instrumentation feedthroughs are used to carry electrical signals (Including Thermocouple) which are normally low current and/or voltage. These feedthroughs are available in multi pin versions on either 34mm or 70mm OD flanges. These also come with the option of a European voltage compliant connectors

Instrumentation feedthroughs are used to carry electrical signals (Including Thermocouple) which are normally low current and/or voltage. These feedthroughs are available in multi pin versions on either 34mm or 70mm OD flanges. These also come with the option of a European voltage compliant connectors

Instrumentation feedthroughs are used to carry electrical signals (Including Thermocouple) which are normally low current and/or voltage. These feedthroughs are available in multi pin versions on either 34mm or 70mm OD flanges. These also come with the option of a European voltage compliant connectors

Instrumentation feedthroughs are used to carry electrical signals (Including Thermocouple) which are normally low current and/or voltage. These feedthroughs are available in multi pin versions on either 34mm or 70mm OD flanges. These also come with the option of a European voltage compliant connectors

Instrumentation feedthroughs are used to carry electrical signals (Including Thermocouple) which are normally low current and/or voltage. These feedthroughs are available in multi pin versions on either 34mm or 70mm OD flanges. These also come with the option of a European voltage compliant connectors

Instrumentation feedthroughs are used to carry electrical signals (Including Thermocouple) which are normally low current and/or voltage. These feedthroughs are available in multi pin versions on either 34mm or 70mm OD flanges. These also come with the option of a European voltage compliant connectors

Instrumentation feedthroughs are used to carry electrical signals (Including Thermocouple) which are normally low current and/or voltage. These feedthroughs are available in multi pin versions on either 34mm or 70mm OD flanges. These also come with the option of a European voltage compliant connectors

Instrumentation feedthroughs are used to carry electrical signals (Including Thermocouple) which are normally low current and/or voltage. These feedthroughs are available in multi pin versions on either 34mm or 70mm OD flanges. These also come with the option of a European voltage compliant connectors

Instrumentation feedthroughs are used to carry electrical signals (Including Thermocouple) which are normally low current and/or voltage. These feedthroughs are available in multi pin versions on either 34mm or 70mm OD flanges. These also come with the option of a European voltage compliant connectors

Instrumentation feedthroughs are used to carry electrical signals (Including Thermocouple) which are normally low current and/or voltage. These feedthroughs are available in multi pin versions on either 34mm or 70mm OD flanges. These also come with the option of a European voltage compliant connectors

A zero length viewport has a thickness no larger than that of its mounting flange. It provides a wide angle viewing window for your vacuum chamber as there are no tubulation walls to restrict observation. Manufactured using Sapphire, these viewports are used in high temperature high transmission applications.

The RD6 is a manual or motorised precision rotary drive with a 100mm shaft length. The RD6 has low backlash, with a smooth continuous primary rotation via a 9.5 mm diameter shaft.

The RD7 is a manual or motorised high precision rotary drive, with a 256mm shaft length. The RD7 is fitted with Index scale, rotation stops and position lock. The drive provides a low backlash, with a smooth continuous primary rotation via a 9.5 mm diameter shaft.

High power all metal magnetically coupled coarse linear and rotary transfer device for UHV applications, using only UHV accepted metals within its construction. Providing smooth sample transfer movement within the vacuum chamber, where high accuracy is not required.

High power all metal magnetically coupled coarse linear and rotary transfer device for UHV applications, using only UHV accepted metals within its construction. Providing smooth sample transfer movement within the vacuum chamber, where high accuracy is not required.

High power all metal magnetically coupled coarse linear and rotary transfer device for UHV applications, using only UHV accepted metals within its construction. Providing smooth sample transfer movement within the vacuum chamber, where high accuracy is not required.

High power all metal magnetically coupled coarse linear and rotary transfer device for UHV applications, using only UHV accepted metals within its construction. Providing smooth sample transfer movement within the vacuum chamber, where high accuracy is not required.

High power all metal magnetically coupled coarse linear and rotary transfer device for UHV applications, using only UHV accepted metals within its construction. Providing smooth sample transfer movement within the vacuum chamber, where high accuracy is not required.

High power all metal magnetically coupled coarse linear and rotary transfer device for UHV applications, using only UHV accepted metals within its construction. Providing smooth sample transfer movement within the vacuum chamber, where high accuracy is not required.

High power all metal magnetically coupled coarse linear and rotary transfer device for UHV applications, using only UHV accepted metals within its construction. Providing smooth sample transfer movement within the vacuum chamber, where high accuracy is not required.

High power all metal magnetically coupled coarse linear and rotary transfer device for UHV applications, using only UHV accepted metals within its construction. Providing smooth sample transfer movement within the vacuum chamber, where high accuracy is not required.

Flexible connectors are used to compensate for any misalignment between flanges that have to be linked together. On each axis, one of the flanges is fixed and the other is rotatable, enabling the connection in any orientation of the vacuum equipment.

Flexible connectors are used to compensate for any misalignment between flanges that have to be linked together. On each axis, one of the flanges is fixed and the other is rotatable, enabling the connection in any orientation of the vacuum equipment.

Flexible connectors are used to compensate for any misalignment between flanges that have to be linked together. On each axis, one of the flanges is fixed and the other is rotatable, enabling the connection in any orientation of the vacuum equipment.

Flexible connectors are used to compensate for any misalignment between flanges that have to be linked together. On each axis, one of the flanges is fixed and the other is rotatable, enabling the connection in any orientation of the vacuum equipment.

Flexible connectors are used to compensate for any misalignment between flanges that have to be linked together. On each axis, one of the flanges is fixed and the other is rotatable, enabling the connection in any orientation of the vacuum equipment.