Linear Drive 70mm OD 100mm Z M6 tapped / Stepper/Encoder

Available for Quote
SKU
ZLTM100ME

File(s)

Z-Axis Linear Transfer Mechanism with edge welded bellows providing a 38mm clear bore on a 70mm OD flange, with length options of 25mm to 150mm. The LTM is a manual or motorised transfer device providing controlled Z-axis motion, allowing samples and probes up to a diameter of 38mm to be inserted with accuracy and stability into a vacuum envelope.
More Information
Linear Drive Type Stepper Motor
Microswitch Switch Limits Yes
Reed Switch Limits No
Travel 100
Flange Size 70mm
Encoder Option Encoder
Bolting Size 6mm
Bolt Holes tap

File(s)

features

Linear Transfer Mechanism (LTM)
DN Type Flange OD mm Travel mm Operation A Extended mm A Compressed mm B Extended mm B Compressed mm Shipping Weight (kg) Part Code Available In Stock
DN40 70 Tapped 25 Manual 63 38 159 134 3.2 ZLTM25
DN40 70 Tapped 50 Manual 92 42 215 165 3.4 ZLTM50 Yes
DN40 70 Tapped 75 Manual 125 50 258 183 3.8 ZLTM75 Yes
DN40 70 Tapped 100 Manual 163 63 310 210 4.2 ZLTM100 Yes
DN40 70 Tapped 150 Manual 215 65 434 284 4.6 ZLTM150 Yes
Linear Transfer Mechanism with Stepper Motor
DN Type Flange OD mm Travel mm Operation A Extended mm A Compressed mm B Extended mm B Compressed mm Shipping Weight (kg) Part Code Available In Stock
DN40 70 Tapped 25 Stepper motor(1) 63 38 162 137 ZLTM25W
DN40 70 Tapped 50 Stepper motor(1) 92 42 218 168 ZLTM50W
DN40 70 Tapped 75 Stepper motor(1) 125 50 261 186 ZLTM75W
DN40 70 Tapped 100 Stepper motor(1) 163 63 313 213 ZLTM100W
DN40 70 Tapped 150 Stepper motor(1) 215 65 437 287 ZLTM150W
(1) Motor Included
Linear Transfer Mechanism with Encoder
DN Type Flange OD mm Travel mm Operation A Extended mm A Compressed mm B Extended mm B Compressed mm Shipping Weight (kg) Part Code Available In Stock
DN40 70 Tapped 25 Stepper with encoder 63 38 162 137 ZLTM25ME
DN40 70 Tapped 50 Stepper with encoder 92 42 218 168 ZLTM50ME
DN40 70 Tapped 75 Stepper with encoder 125 50 261 186 ZLTM75ME
DN40 70 Tapped 100 Stepper with encoder 163 63 313 213 ZLTM100ME
DN40 70 Tapped 150 Stepper with encoder 215 65 437 287 ZLTM150ME

Accessories and Kits

Product Part code
Lubrication Kit ZLUBEK
Technical Data Table (LTM)
Flange Size DN40, M6 tapped
Bore 38mm Clear Bore
Travel range 25mm to 150mm
Motion control Manual, Stepper Motor, Encoded Stepper Motor, DC Motor
Operating Pressure Range 1 bar to 10-11 mbar
Leak rate 1x10-10 mbar ls-1
Operating Temperature Range -20°C to +200°C
Baking Temperature 250°C after removing motors, if fitted
Torque required to elevate 1.2Nm
Maximum Axial load 200N
Maximum Radial load 50N
Parallelism of flange faces <0.04 mm