Search results for: 'leak potatoes out after slicimg style good to eat'

DPRF Spares

All metal Leak Valves with Mallory® sealing pad which offers a superior seal compared to a sapphire seat which can crack causing system vacuum failure. These are recommended for repeatable precise control the flow of gas and these are the preferred choice for system builders who need a reliable cost effective ultra-fine gas inlet control.

Right angle all metal valve, offering good conductance. The CR series comes with two body types, fully welded CR series or demountable CRD series.

A zero length viewport has a thickness no larger than that of its mounting flange. This makes it easier to protect from accidental damage. It provides the best angle of view as there are no tubulation walls to restrict observation. Kodial viewports are offered in CF flange styles. The viewports comprise borosilicate glass optic which is sealed to a Kovar weld ring using an induction heater process. The optic assemblies are helium leak tested and cleaned for ultra high vacuum (UHV) conditions.

A zero length viewport has a thickness no larger than that of its mounting flange. This makes it easier to protect from accidental damage. It provides the best angle of view as there are no tubulation walls to restrict observation. Kodial viewports are offered in CF flange styles. The viewports comprise borosilicate glass optic which is sealed to a Kovar weld ring using an induction heater process. The optic assemblies are helium leak tested and cleaned for ultra high vacuum (UHV) conditions.

Right angle all metal valve, offering good conductance. The CR series comes with two body types, fully welded CR series or demountable CRD series.

Right angle all metal valve, offering good conductance. The CR series comes with two body types, fully welded CR series or demountable CRD series.

This jaw assembly is a plain style jaw, for flag style transfer please contact sales@vacgen.com. A flag detail is required in the end of the jaw to accommodate flag transfer. Mechanical hands are used for transferring a sample where linear, angular and rotary movement is required. The pistol grip which actuates the movement and the use of edge welded bellows, gives the user a true 'feeling' of position inside the vacuum chamber to give a controlled transfer. These can be supplied with or…

This jaw assembly is a plain style jaw, for flag style transfer please contact sales@vacgen.com. A flag detail is required in the end of the jaw to accommodate flag transfer. Mechanical hands are used for transferring a sample where linear, angular and rotary movement is required. The pistol grip which actuates the movement and the use of edge welded bellows, gives the user a true 'feeling' of position inside the vacuum chamber to give a controlled transfer. These can be supplied with or…

The Titanium Sublimation Pump is a true UHV pump. It is used to supplement the pumping action of other UHV pumps, (normally Ion Pumps) as it can be more effective at pumping certain gases. The main advantages of this type of pump is, it is a simple, low cost solution, that gives you high pumping speeds.

Dedicated 18mm flag style pincer grip wobble stick are used where linear and angular movement is required to move flag sample plates in vacuum These come in two designs, inline and perpendicular sample pick up. Edge welded bellows, gives the user a true 'feeling' of position inside the vacuum chamber to give a controlled positioning.

Dedicated 18mm flag style pincer grip wobble stick are used where linear and angular movement is required to move flag sample plates in vacuum These come in two designs, inline and perpendicular sample pick up. Edge welded bellows, gives the user a true 'feeling' of position inside the vacuum chamber to give a controlled positioning.

Dedicated 18mm flag style pincer grip wobble stick are used where linear and angular movement is required to move flag sample plates in vacuum These come in two designs, inline and perpendicular sample pick up. Edge welded bellows, gives the user a true 'feeling' of position inside the vacuum chamber to give a controlled positioning.

Dedicated 18mm flag style pincer grip wobble stick are used where linear and angular movement is required to move flag sample plates in vacuum These come in two designs, inline and perpendicular sample pick up. Edge welded bellows, gives the user a true 'feeling' of position inside the vacuum chamber to give a controlled positioning.

Dedicated 18mm flag style pincer grip wobble stick are used where linear and angular movement is required to move flag sample plates in vacuum These come in two designs, inline and perpendicular sample pick up. Edge welded bellows, gives the user a true 'feeling' of position inside the vacuum chamber to give a controlled positioning.

Mechanical hands are used for transferring a sample where linear, angular and rotary movement is required. The pistol grip which actuates the movement and the use of edge welded bellows, gives the user a true 'feeling' of position inside the vacuum chamber to give a controlled transfer. These can be supplied with or without the pincer grip. If supplied with a pincer, these can be inline or perpendicular, with plain jaws or jaws to accept the flag style sample plate.

Mechanical hands are used for transferring a sample where linear, angular and rotary movement is required. The pistol grip which actuates the movement and the use of edge welded bellows, gives the user a true 'feeling' of position inside the vacuum chamber to give a controlled transfer. These can be supplied with or without the pincer grip. If supplied with a pincer, these can be inline or perpendicular, with plain jaws or jaws to accept the flag style sample plate.

Mechanical hands are used for transferring a sample where linear, angular and rotary movement is required. The pistol grip which actuates the movement and the use of edge welded bellows, gives the user a true 'feeling' of position inside the vacuum chamber to give a controlled transfer. These can be supplied with or without the pincer grip. If supplied with a pincer, these can be inline or perpendicular, with plain jaws or jaws to accept the flag style sample plate.

Mechanical hands are used for transferring a sample where linear, angular and rotary movement is required. The pistol grip which actuates the movement and the use of edge welded bellows, gives the user a true 'feeling' of position inside the vacuum chamber to give a controlled transfer. These can be supplied with or without the pincer grip. If supplied with a pincer, these can be inline or perpendicular, with plain jaws or jaws to accept the flag style sample plate.

Mechanical hands are used for transferring a sample where linear, angular and rotary movement is required. The pistol grip which actuates the movement and the use of edge welded bellows, gives the user a true 'feeling' of position inside the vacuum chamber to give a controlled transfer. These can be supplied with or without the pincer grip. If supplied with a pincer, these can be inline or perpendicular, with plain jaws or jaws to accept the flag style sample plate.

Mechanical hands are used for transferring a sample where linear, angular and rotary movement is required. The pistol grip which actuates the movement and the use of edge welded bellows, gives the user a true 'feeling' of position inside the vacuum chamber to give a controlled transfer. These can be supplied with or without the pincer grip. If supplied with a pincer, these can be inline or perpendicular, with plain jaws or jaws to accept the flag style sample plate.

Mechanical hands are used for transferring a sample where linear, angular and rotary movement is required. The pistol grip which actuates the movement and the use of edge welded bellows, gives the user a true 'feeling' of position inside the vacuum chamber to give a controlled transfer. These can be supplied with or without the pincer grip. If supplied with a pincer, these can be inline or perpendicular, with plain jaws or jaws to accept the flag style sample plate.

Mechanical hands are used for transferring a sample where linear, angular and rotary movement is required. The pistol grip which actuates the movement and the use of edge welded bellows, gives the user a true 'feeling' of position inside the vacuum chamber to give a controlled transfer. These can be supplied with or without the pincer grip. If supplied with a pincer, these can be inline or perpendicular, with plain jaws or jaws to accept the flag style sample plate.

Mechanical hands are used for transferring a sample where linear, angular and rotary movement is required. The pistol grip which actuates the movement and the use of edge welded bellows, gives the user a true 'feeling' of position inside the vacuum chamber to give a controlled transfer. These can be supplied with or without the pincer grip. If supplied with a pincer, these can be inline or perpendicular, with plain jaws or jaws to accept the flag style sample plate.

Mechanical hands are used for transferring a sample where linear, angular and rotary movement is required. The pistol grip which actuates the movement and the use of edge welded bellows, gives the user a true 'feeling' of position inside the vacuum chamber to give a controlled transfer. These can be supplied with or without the pincer grip. If supplied with a pincer, these can be inline or perpendicular, with plain jaws or jaws to accept the flag style sample plate.

Mechanical hands are used for transferring a sample where linear, angular and rotary movement is required. The pistol grip which actuates the movement and the use of edge welded bellows, gives the user a true 'feeling' of position inside the vacuum chamber to give a controlled transfer. These can be supplied with or without the pincer grip. If supplied with a pincer, these can be inline or perpendicular, with plain jaws or jaws to accept the flag style sample plate.

Mechanical hands are used for transferring a sample where linear, angular and rotary movement is required. The pistol grip which actuates the movement and the use of edge welded bellows, gives the user a true 'feeling' of position inside the vacuum chamber to give a controlled transfer. These can be supplied with or without the pincer grip. If supplied with a pincer, these can be inline or perpendicular, with plain jaws or jaws to accept the flag style sample plate.

Mechanical hands are used for transferring a sample where linear, angular and rotary movement is required. The pistol grip which actuates the movement and the use of edge welded bellows, gives the user a true 'feeling' of position inside the vacuum chamber to give a controlled transfer. These can be supplied with or without the pincer grip. If supplied with a pincer, these can be inline or perpendicular, with plain jaws or jaws to accept the flag style sample plate.

Mechanical hands are used for transferring a sample where linear, angular and rotary movement is required. The pistol grip which actuates the movement and the use of edge welded bellows, gives the user a true 'feeling' of position inside the vacuum chamber to give a controlled transfer. These can be supplied with or without the pincer grip. If supplied with a pincer, these can be inline or perpendicular, with plain jaws or jaws to accept the flag style sample plate.

Mechanical hands are used for transferring a sample where linear, angular and rotary movement is required. The pistol grip which actuates the movement and the use of edge welded bellows, gives the user a true 'feeling' of position inside the vacuum chamber to give a controlled transfer. These can be supplied with or without the pincer grip. If supplied with a pincer, these can be inline or perpendicular, with plain jaws or jaws to accept the flag style sample plate.

Mechanical hands are used for transferring a sample where linear, angular and rotary movement is required. The pistol grip which actuates the movement and the use of edge welded bellows, gives the user a true 'feeling' of position inside the vacuum chamber to give a controlled transfer. These can be supplied with or without the pincer grip. If supplied with a pincer, these can be inline or perpendicular, with plain jaws or jaws to accept the flag style sample plate.

The VR valves are right angled general purpose UHV valves with a cycle usage minimum of 100,000 activations. The bonnet (top) seal of the valve is welded on the VR series.

The MRD6 is a manual or motorised magnetic rotary drive which uses high strength Sm2Co17 magnetic coupling to transfer rotational forces into the vacuum envelope. This is achieved without any dynamic seals or bellows making these devices exceptionally robust and no risk of a vacuum leak for the life of the drive. The MRD6 is fitted with Index scale and position lock.

Instrumentation feedthroughs are used to carry electrical signals (Including Thermocouple) which are normally low current and/or voltage. These feedthroughs are available in multi pin versions on either 34mm or 70mm OD flanges. These also come with the option of a European voltage compliant connectors

Instrumentation feedthroughs are used to carry electrical signals (Including Thermocouple) which are normally low current and/or voltage. These feedthroughs are available in multi pin versions on either 34mm or 70mm OD flanges. These also come with the option of a European voltage compliant connectors

Super clean ultra high quality oxygen free annealed copper gaskets for lower tightening torque to make a UHV leak tight seal. These are rumbled to remove all the burrs, UHV cleaned and individually packed. Recommended for use where you are using zero length viewports and fragile ceramic feedthroughs.

Fixed blank Conflat flange (CF) are available in the full range of sizes. These are used to blank off unused chamber ports for leak-tight assembly, also allowing End User machining for non standard tube sizes or components.

Fixed blank Conflat flange (CF) are available in the full range of sizes. These are used to blank off unused chamber ports for leak-tight assembly, also allowing End User machining for non standard tube sizes or components.

Fixed blank Conflat flange (CF) are available in the full range of sizes. These are used to blank off unused chamber ports for leak-tight assembly, also allowing End User machining for non standard tube sizes or components.

Fixed blank Conflat flange (CF) are available in the full range of sizes. These are used to blank off unused chamber ports for leak-tight assembly, also allowing End User machining for non standard tube sizes or components.

Rotatable blank Conflat flange (CF) consists of two parts, the inner knife edge detail and the outer bolt hole retaining ring which rotates around the inner part. This allows the boltholes to align to mating flanges in any orientation. These are used to blank off unused chamber ports for leak-tight assembly, also allowing End User machining for non standard tube sizes or components.

Rotatable blank Conflat flange (CF) consists of two parts, the inner knife edge detail and the outer bolt hole retaining ring which rotates around the inner part. This allows the boltholes to align to mating flanges in any orientation. These are used to blank off unused chamber ports for leak-tight assembly, also allowing End User machining for non standard tube sizes or components.

Bellows Assembly

RD Spares

Spares for all metal valves

Spares for all metal valves

Drive Screw Assembly for LTM150

Drive Screw Assembly for LTM100

Drive Screw Assembly for LTM75

Drive Screw Assembly for LTM25

RD Spares

Spares for the DPRF25

RD Spares

Motor Upgrade for RD2

Motor Upgrade for RD2

Flange with tubulation enabling welding without risking conflat knife edge damage. Specifically designed and manufactured for vacuum system designers and manufacturers of vacuum components.

Flange with tubulation enabling welding without risking conflat knife edge damage. Specifically designed and manufactured for vacuum system designers and manufacturers of vacuum components.

Motor Upgrade for RD1, 2 & 7

Straight Connector with one fixed flange and the other is rotatable, enabling the connection in any orientation of the vacuum equipment.

Motor Upgrade for RD1, 2 & 7